查询词典 load up

From the experimental results, both in no-load and full-load cases, all the proposed slip estimation schemes exhibit good performances of speed tracking and robust load disturbances rejection.

由实验结果证明不管在无载或满载情况下，所提出四种不同无转速感测的系统都具有良好的转速追踪能力，并且对於负载的扰动系统都拥有很好的强健性能。

All mechanical loads are considered, including internal pressure, gravity, wind load and earthquake load, in which the modal analysis of the drum, functional wind load and temporal analysis for earthquake are the innovations of this paper.

分析焦炭塔在机械载荷，如内压、自重、风载和地震载荷作用下的应力情况，其中塔体的模态分析、风载的函数加载和地震载荷的时程分析是本文的创新。

It comprises: CN pages call and the page message carries the sonic service information, as the sonic service of CS region; UE responds page, and sends the sonic service information to RNC in the initial access request message; RNC receives request and makes sure it is sonic service of CS region, to decide one sonic speed parameter Rm, and based on the resource demand, to build one wireless chain and ground load between Iub interface signal and service, and the signal and service load of wireless interface; UE and CN processes QoS consultation, and CN sends the consulted Qos parameter to RNC, which comprises a sonic speed parameter Ra of this service; RNC compares parameter Ra and Rm, if Ra is higher then Rm, builds the ground load of Iu interface and sends distribution answer message to CN to continuously page answer process.

一种WCDMA系统被叫侧语音呼叫的快速建立方法，包括步骤：CN寻呼被叫，寻呼消息中携带语音业务信息，指明是CS域的语音业务；UE响应寻呼，在初始接入请求消息中将所述语音业务信息传递到RNC；RNC收到请求并获知是CS域的语音业务后，决策出一个语音速率参数Rm并基于其对资源的要求，建立Iub接口信令和业务的无线链路及地面承载，以及无线接口的信令和业务承载；UE和CN进行QoS协商，CN将协商得到的Qos参数指派给RNC，其中包括本次业务的语音速率参数Ra；RNC比较参数Ra和Rm，如果Ra≥Rm，则建立Iu接口的地面承载，向CN发送指派应答消息，继续呼叫应答过程。

Damage checking. To prove the load spectrum testing and research is correct, our load spectrum and AAR wagon load spectrum which 90.7 tons of high-sided wagon linear is transformed to 70 tons, the accumulated fatigue damage amount were compared under the same mileage.

损伤检验。为了证明本次载荷谱测试与研究的正确性，将实测和统计推断后的载荷谱，与AAR标准90.7吨高边敞车线性转化到70吨的载荷谱，在相同里程下疲劳累积损伤量，进行了比较。

Know how to use the load chart together with the load indicators and/or load moment devices.

知道如何使用负载图表一起负荷指标和/或力矩设备。

Know how to use the load chart together with the load indicators and/or load moment devices.

知道如何使用负载图表一起负荷指标和/或力矩设备。ctv32000那个帐号给俺爸了，以后用就用这个帐号了。

Finally, based on the dynamic load chart received by kinetics study on gear transmission system of turbine starter, has a statistic on dynamic load, receives the load spectrum by the method of counting range, then selects S-N curve method and Manson-coffin formula respectively for the fatigue damage calculation and life prediction of the tooth circle.

最后，在对涡轮起动机齿轮传动系统进行动力学分析获得的动载荷历程的基础上，对动载荷进行统计分析，采用幅值计数法获得载荷谱；分别采用S-N曲线法和Manson-Coffin法对涡轮起动机齿圈疲劳寿命进行了预估。

The time history curves of axial load and impact load were recorded,the effect of axial load on mid-span deflection was achieved.

试验中记录的撞击力时程曲线可分为迅速上升的冲击力加载、平稳的塑性动力响应和卸载三个阶段。

After carries on the load computation and the component section estimate, selected a pin frame to carry on the computation, the computation content including the frame beam column section size selection and the line rigidity computation; Dead load, live load, under earthquake function Liang Duan, column end moment, shearing force computation; Frame endogenic force combination; The frame beam column matches the muscle computation; The staircase matches the muscle computation and the foundation matches the muscle computation.

在进行荷载计算和构件截面估算后，选取了一榀框架进行计算，计算内容包括框架梁柱截面尺寸的选取及线刚度的计算；恒载、活载、地震作用下梁端、柱端弯矩、剪力的计算；框架内力组合；框架梁柱配筋计算；楼梯配筋计算及基础配筋计算。

The results show that in the applied load range of 10250 N, the mass loss rate of coated AZ91D alloy can be identified to three stages, which are related with whether the coating is worn out. Abrasion is the main mechanism for the coated alloy. The friction coefficient of the coated alloy during sliding wear appears oscillation before it reaches a constant value, which is close to the μ value of the matrix alloy. The mass loss rate of coated alloy increases slightly with increasing applied load when the applied load is more than 150 N because of high plastic deformation accommodation on the matrix alloy surface.

结果表明：根据载荷大小，涂层处理后AZ91D镁合金的磨损行为明显分为3个阶段，这些阶段同陶瓷层是否磨穿密切相关；微弧氧化涂层AZ91D镁合金的磨损机理主要是磨粒磨损；受表面状况的影响，陶瓷涂层的摩擦因数在 0.20~0.45 间波动；在较高载荷下，涂层被磨穿后，涂层的摩擦因数趋于基体合金的摩擦因数，涂层合金的表面变形能力提高，该阶段质量磨损速率随载荷增加，趋势变得缓慢。

The work of this paper is as follows: 1. Looking back the progressing history of the linear motor, introducing the features of the elevator driven by linear induction motor, radicating the topic of this paper "the digital frequency variable control of the elevator bi-side direct driven by linear induction motor". The research of this paper covers the conventional VVVF control, space vector based VVVF control, vector control and DTC.

本文主要开展了以下几个方面的工作： 1 回顾了直线电机发展历史，电机的驱动技术演变，特别是针对直线电机的驱动，简要介绍了直线感应电机驱动电梯的优点和不同结构类型，对传统的v／f控制，基于空间矢量法的v／f控制，矢量控制，和基于电压空间矢量的直接转矩控制进行了比较，确立了本课题的研究主题：直线感应电机双边直推式驱动电梯的全数字变频控制。

The article combines with the treatment of a superficial civil air defense work to introduce how the grouting method to improve the performance of the backfill soil.

文章从治理漂浮人防工事的角度提出了注浆技术在改善回填土性质方面的应用，并详细阐述了注浆技术的施工流程。