查询词典 isothermal parameter

The main work and the originality points of this dissertation could be concluded as the following parts:(1) To analyze systematically the mathematical model of LES of air flow in great space, under the case of isothermal and non-isothermal, as well as the combined action of buoyancy and strain. Some basic problems are studied about the LES application into airflow simulation of great space, such as boundary conditions, spatial difference scheme and time advancing scheme, time step etc., which creates the basis for the LES application to indoor airflow simulation.(2) Both the instantaneous and time averaged flow field of great space with multiple jets under isothermal and non-isothermal cases are explored with large eddy simulation method, and also discussed the dynamic characteristics and the law of fluidflow in the great space.(3) Based on the results of LES of the great space and the Fanger thermal comfort indexes, it is brought forward the concept of the series of dynamic thermal comfort evaluating indexes, which could be divided into thermal comfort index with time averaged properties PD, PPD, PMV, thermal comfort index with instantaneous properties IPD, IPPD, IPMV, and time averaged thermal comfort indexes TAPD, TAPPD, TAPMV, and transient situations time averaged thermal comfort indexes TTAPD, TTAPPD, TTAPMV. The differences among them and the calculation methods are discussed, and the four kinds of indexes are calculated with the thermal comfort index PD as an example.(4) Based on the LES results it is discussed the hot air stratification phenomena in air-conditioned buildings in the case with air supply and return registers on the ceiling and the case on the sidewall. The fundamentals of the hot air stratification are studied and the relations of estimating hot air stratification are brought forward.(5) With the advanced apparatus such as hot wire film anemometer IFA300 and laser particle field anemoscope, corresponding model test and site measurements have been done, which are compared with the simulation results and LES is proved a very promising method in air flow simulation indoor.

本文主要工作既创新点体现在以下几个方面：(1)系统分析了等温、非等温和考虑剪切力与浮升力综合作用的高大空间大涡模拟数学模型，并研究了高大空间大涡模拟在室内气流仿真应用中的一些基本问题，如边界条件、空间离散格式和时间推进格式、时间步长选择等问题，为大涡模拟在室内气流计算中的广泛应用打下了基础；(2)首次用大涡模拟方法研究了高雷诺数下高大空间多射流在等温、非等温情况下的瞬时流场和时均流场分布，并探讨了多射流流场的动态特性和流动规律；(3)基于大涡模拟的动态仿真结果和Fanger的热舒适指标，首次系统地提出了动态热舒适评价指标体系的概念：即基于时间平均参数的热舒适指标PD、PPD、PMV；基于瞬时参数的瞬时热指标IPD、IPPD、IPMV；基于时间平均热舒适指标TAPD、TAPPD、TAPMV；以及沿行动迹线的时间平均热舒适指标TTAPD、TTAPPD、TTAPMV，并分析了四类热舒适指标的差异性和计算方法，还以PD值为例对四类指标分别进行了计算；(4)基于数十种工况下空调房间大涡模拟的结果，研究了空调建筑上送上回和侧送侧回两种情况下热分层现象，并探讨了热分层的基本规律，首次提出了避免热分层现象的判断公式；(5)在暖通空调领域，首次使用IFA300热线风速仪、激光粒子速度场仪等先进设备，完成了与大涡模拟相对应的模型试验，并把实测结果与仿真结果进行了对比，说明LES在室内气流仿真方面是一种很有前景的方法。

First make the subjects give either right or wrong responses to the same question with different b value. When estimating the abilities of the subjects with the use of one-parameter or two-parameter Logistic model, it is found that there exists two kinds of unfits.(2) Estimate the abilities of the subjects after introducing c parameter on the basis of the two-parameter model. The first unfit can be rectified. However, the second unfit still exists and the third unfit appears.(3) Then estimate again after introducing y parameter. It is discovered that the second unfit is rectified, but the first unfit still exists and the fourth unfit appears.(4) Form Logistic four-parameter model by introducing c parameter and y parameter at the same time and estimate one more time. This model makes all kinds of unfits, including the first, second, third and fourth unfits, rectified.

1设计这批被试分别做对或做错一道b值不同的试题，用Logistic单、双参数模型对被试进行能力估计时，发现被试能力估计存在着两类失拟现象；(2)在双参数模型基础上增加c参数，对被试进行能力估计，发现c参数能有效纠正第一失拟现象，然而仍然存在第二失拟现象，同时还存在第三失拟现象；(3)在双参数模型基础上增加γ参数，再对被试进行能力估计，发现γ参数能有效纠正第二失拟现象，而仍然存在第一失拟现象，同时还存在第四失拟现象；(4)同时增加c、γ参数形成Logistic四参数模型，再对被试进行能力估计，这时该模型对各类失拟现象，包括第一、第二、第三、第四失拟现象都具有良好拟合能力。

The differential exhumation caused by the NNE-trending faults probably continued all the way from the 180℃isothermal surface, through 110℃isothermal surface to the 70℃isothermal surface. At 90Ma, Dabie orogen"s average height of topography, compared with the current sea level, reached 1.45 km (when geothermal gradient is chosen as 25℃/km) or 1.75 km (when geothermal gradient is chosen as 20℃/km), which is 4(when geothermal gradient is chosen as 25℃/km) or 5(when geothermal gradient is chosen as 20℃/km) times of the height of today"s surface topography in simulated region.

这种由于NNE向断裂系引发的差异推隆剥露，可能从等温面180℃锆石(U-Th／He的封闭温度、经过110℃(磷灰石裂变径迹的退火温度)一直延续到70℃等温面磷灰石(U-Th／He的封闭温度大别造山带90Ma时与现今海平面相比地形平均高度可达1.45km(地温梯度取25℃／km时)或1.75km(地温梯度取20℃／km时)，是现今模拟区域地形平均高度的4倍(地温梯度取25℃／km时)或5倍(地温梯度取20℃／km时)。

Langmuir isothermal absorption equation for unimolecular layer was analyzed. Based on the data obtained from the isothermal absorption experiments for caramel and alkaline degradation products to glucose on fresh calcium phosphate precipitates in sugar solution with different mass concentrations, a mathematical model describing isothermal absorption for this kind of fresh solid phase in multi-component liquid phase was established by modern computer technology.

通过分析单分子层等温吸附Langmuir方程，以不同质量浓度蔗糖溶液中新生磷酸钙固相对焦糖、葡萄糖碱性降解物的等温吸附实验数据为基础，利用现代计算机技术建立了描述这类新生固相在多组分液相中的等温吸附过程的数学模型。

And the channel composed of the new radio induction system for communication is different from the parameter-constant channel and the traditional parameter-changing channel, its parameter is decided by the mutual induction between its antenna and induction-cable, by the location of its antenna, by the signal frequency passing through, its parameter has nothing to do with the time parameter. The channel composed of the new radio induction system is a new parameter-changing channel independently of time for communication.

而且，由新型无线感应系统组成的信道既不是恒参信道，也不是一般目前所知的变参信道，其信道传递函数的幅值只与信号的频率有关，与系统中天线和感应电缆之间的互感和天线的位置有关，而与时间无关，其信道传递函数的相位只与天线的位置有关，而与时间无关，由新型无线感应系统组成的信道是一种不随时间变化的新型变参信道。

In this paper,results of Markov chain are used under the circumstances of the automaton model which belongs to logical level of Discrete Event System to analyze the steady states and transient states of the Markov model of DES,respectively based on four conditions of discrete-time parameter and continuous-time parameter.A simpler decision rule of system ergodic property which applies both to the conditions of discrete-time parameter and continuous-time parameter is presented through an example.The transient states of DES which under the condition of continuous-time parameter are analyzed and computed based on Kolmogorov backward equation or forward equation.

利用马尔科夫链的结果，在离散事件系统逻辑层次的自动机模型基础上，对DES的Markov模型的稳态和暂态特性，分别从时间参数连续和离散的情况下，分四个情况进行了分析，通过实例对系统遍历性提出了一条更简单的且在连续和离散时间参数情况下都通用的判定规则，并利用Kolmogorov向后或向前方程，对连续时间参数DES的暂态特性进行了分析和计算。

In order to improve the reliability of the nuclear Generating Sets and the stabilization of the power system, prevent the long time low frequency oscillation caused by the disturbed of the outside electrical net, assured improving the stabilization margin of the nuclear generating sets in the precondition of enough transient stability, validate the sensitivity of the parameter to the damping of Generating Sets of the MEC5220 digital excitation adjustor produce in Japan that used in the Second Project of Qinshan Nuclear Power Plant, confirm the parameter rationality of the digital excitation adjustor, optimize the parameter of PSS, in this paper, we put up a in-depth study to the principle of MEC5220 digital adjustor produce in Japan by the PSS/E software that develop by the PTI Company in the USA, completed the modeling of the excitation adjustor, PSS, generator, excitor, described the performance of this excitation adjustor, analyzed the essential reason that caused the low frequency oscillation, illuminated the factor that influence the damping characteristic of the MEC5220 digital excitation adjustor. Based on model and emulate, this paper optimized the primary parameter of the excitation adjustor, make a reasonable regulation to the PSS parameter.

为提高核电机组的运行可靠性和接入系统的安全稳定性，防止在外电网的干扰下核电机组发生长时间的低频振荡，保证机组在暂态稳定的前提下提高其稳定裕度，验证秦山核电二期核电机组所配日产MEC5220型数字式励磁调节器参数对机组阻尼的灵敏性，确定数字式励磁调节器的参数的合理性，优化PSS整定参数，本文利用美国PTI公司研发的PSS／E软件对日产MEC5220型数字调节器的原理进行进行了深入细化的研究，完成了励磁调节器、PSS、发电机、励磁机的建模，描述了该型励磁调节器的性能，分析了产生低频振荡的根本原因，阐明了影响阻尼特性的因素。

So it holds a ideal ability to anti-interference and has 2 scalar level resolution in location and measuring velocity than traditional radio induction technology. And the channel composed of the new radio induction system for communication is different from the parameter-constant channel and the traditional parameter-changing channel, its parameter is decided by the mutual induction between its antenna and induction-cable, by the location of its antenna, by the signal frequency passing through, its parameter has nothing to do with the time parameter.

而且，由新型无线感应系统组成的信道既不是恒参信道，也不是一般目前所知的变参信道，其信道传递函数的幅值只与信号的频率有关，与系统中天线和感应电缆之间的互感和天线的位置有关，而与时间无关，其信道传递函数的相位只与天线的位置有关，而与时间无关，由新型无线感应系统组成的信道是一种不随时间变化的新型变参信道。

The method controls a whole operation process mainly through a PC, wherein the PC transmits a preset polarity parameter and an electric testing parameter to a PCI control module, and a light test parameter to a light test module, while the PCI control module transmits corresponding parameter signal to a polarity detection module and an electric test module; moreover, a fixture is started to carry out parameter testing, and then the data tested by the fixture is transmitted to the PC.

本发明主要是通过PC机来控制整个操作过程，其中PC机把预设极性参数、电测试参数传输给PCI控制模块，和由PC机把光测试参数传输给光测试模块，而PCI控制模块再把相应的参数信号传输给极性检测模块和电测试模块，并启动夹具进行参数测试，再把由夹具测试所得数据传输给PC机。

On this basic, we use intelligent decision technology based on case reasoning to NC cutting parameter decision and analysis. According the characters of NC cutting parameter decision, we take decision based on NC techniques rule, cutting case matching based on similar degree and cutting parameter correcting based on rules to design and realize system. Combining many field technologies, it makes a unique method to resolve NC cutting parameter problem. This design pattern is a new thinking for NC cutting parameter process.

在此基础上，本文将基于实例推理的智能决策技术用于数控切削参数的决策分析，根据切削参数决策判断过程的特点，分别按照基于规则的切削加工方案决策—基于相似度的切削参数实例匹配—基于规则的切削参数实例修正的设计思路进行了系统设计和实现，多个领域的技术紧密结合，形成解决切削参数难题的独特方法，开辟了数控切削参数处理的新思路。

Metrorrhagia is also gynaecological problems of common diseases.

崩漏是妇科常见病也是疑难症。

WordFTP gives you the convenience and timesaving you need.

wordftp让您的方便和省时您所需要的。