查询词典 interlamellar

The intercalation of the HDTMA cation increased the interlamellar distances from 13.2A (Na-bentonite) to 17.9A (HDTMA-bentonite).

HDTMA 阳离子的置闰增加了从 13.2A到 17.9A 的瓣间的距离。

With the addition of Al of about 1 wt%, the proeutectoid cementites were restrained during equilibrium transformation and dynamic phase transformation, the stability of undercooled austenite during deformation was increased, retarding the formation of pearlite and the interlamellar spacing of pearlite was decreased.

Al的加入使动态相变过程中奥氏体的稳定性提高、珠光体转变推迟，进一步细化了珠光体片层间距。

Meanwhile, it is also illustrates that the smaller chromium carbides have less restriction to forming thin splats than larger ones, which beneficial to limit the size of pieces removed by impact of the sand particles, and the higher volume fraction of small chromium carbide may effect the erosion through enhancing interlamellar bonding of the splats which leads to increase the erosion resistance of the coating.

揭示了细小碳化物颗粒有利于获得扁平粒子厚度较小的涂层结构，可减小涂层冲蚀磨损过程中每次剥落的体积；较高含量的细小碳化物颗粒有利于提高涂层扁平粒子间的结合，从而提高涂层抗冲蚀磨损性能。

Lamellar microstructures of TiAl alloys may be stabilized during exposure at high temperature by the addition of high-Nb element which may decrease stacking fault energy, interlamellar boundary energy and atomic diffusion coefficient.

高Nb合金元素的添加降低堆垛层错能与片层界面能，减小原子扩散系数，可能可以达到提高TiAl合金中片层组织的热稳定性的目的。

The effects of the crystallization degree, the uniformity of charge distribution, the surrounding hydration cation and the pillaring mode of organic molecule on the interlamellar space of hydrobiotite were finally discussed.

通过X射线衍射与红外光谱进行表征分析，讨论了结晶度、电荷分布均匀性、水合阳离子及不同有机分子柱撑模式对晶层层间距的影响。

According to the morphological characteristics of cementite lamellae, the deformed pearlite can be divided into three kinds: irregularly bent lamella (pearlite lamella originally inclined with large angles to the rolling plane and irregularly bent after deformation); coarse lamellae with shear-band (the rhomboidal blocks of weakly deformed lamella bounded by shear band) and fine lamella (heavily deformed lamella aligned parallel to the rolling direction with fine interlamellar spacing).

按渗碳体形态特点，变形珠光体组织可分为以下3种类型：(1)不规则弯曲片层型，即变形后的渗碳体与轧制面呈大角度偏离且不规则弯曲的珠光体。(2)带有剪切带的粗大片层型，即被渗碳体剪切带分开且变形轻微的珠光体。(3)精细片层型，即与轧制方向平行排列、片间距细小且渗碳体严重变形的珠光体。

The structure layer turns from TOa type to TOaT type (balanced by interlamellar cations), then to TOaT type for kaolinite, illite and pyrophyllite, respectively; alumina to silica mass ratio turns from 0.86 to 0.42; the surface zeta potentials turn small, but they show little relation with their surface charge density.

通过红外光谱分析可知，十二胺和油酸钠在一水硬铝石、高岭石、伊利石和叶蜡石表面的吸附主要以静电力作用的物理吸附为主，与矿物的表面电性有关。

On the other hand, T -type twin and α〓 laths were preferentially formed at these nonequilibrium interfaces. The lath formation process involves complex transformations of the interfacial dislocation core and can be activated preferentially under concentrated stress fields at these interlamellar interfaces.

其二，热形变Ti-45Al-8Nb合金片层结构中，由于偏离严格取向关系的α〓/γ，γ/γ〓片层片层界面上具有较大的应力集中，外应力将优先在这些α〓/γ片层界面上诱导形成T型孪生位错，从而形成横过γ片层的T型孪晶。

P and 〓Si MAS NMR results show that both Si-OH groups on the pillars and P-OH groups on the layers react with the Ni〓 and form Si-ONi and P-O-Ni bondings, resulting in a more homogeneous dispersion of the NiO in the interlamellar region.

元素分析表明新方法中未焙烧的前驱体的层间存在大量的胺基，可能与镍产生配合作用，有利于金属离子进入层间。

P and 〓Si MAS NMR results show that both Si-OH groups on the pillars and P-OH groups on the layers react with Cr〓 to form Si-O-Cr and P-O-Cr bondings in Cr〓O〓-SiO〓-ZrP, resulting in a more homogeneous dispersion of the chromium oxide in the interlamellar region.

用〓P和〓Si NMR表征时同样观察到传统方法中氧化铬主要与硅柱作用，与层板几乎不作用，而新方法中氧化铬与层板和硅柱均有强相互作用，使氧化铬更均一地分散于层间区域。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。