查询词典 inner tube

Inner of high temperature is very easy to dock a place to the steel tube coating creation destroys welding because the operation is complicated and Asbestus rope heat insulation effect. Change in the area metallographic organization fever of arousing is affected and the remaining strain arouse strain corroding a dehiscence to create inner steel tube bringing about the ring oxygen powder series falls short of success. Carrying out a certificate is not a preferred plan.

此种方法由于扩口时的精度不高，现场施工环境和条件所限，很难达到预期的效果，加之操作复杂、石棉绳绝热作用的不充分性等引起的焊接高温很容易对钢管对接处的内涂层产生破坏，同时还引起热影响区金相组织发生变化、产生残余应力而引起应力腐蚀开裂，造成环氧粉末系列的内防腐钢管功亏一篑，实践证明不是最佳方案。

As a novel inner surface processing method, grid enhanced plasma source ion implantation method can realize uniform inner surface ion implantation of a metal tube and metal binary compound can be produced.

栅极增强等离子体源离子注入一种新的金属管件内壁处理方法，该方法能够均匀地对金属管件内壁进行离子注入，并且能够生成二元金属化合物。

The utility mode comprises a float chamber(1),a float(2), a meter tube(3), a spacing ring(4), a collar(5), and a guiding ring(6), the float(2) is arranged inside the spacing ring(4), the meter tube (3) is a conical tube, the core-and float flowmeter(3) is a guiding cylinder with different diameters, the guiding cylinder matches for the inner wall of the meter tube.

包括浮子室(1)，浮子(2)，测量管(3)，限位环(4)，挡圈(5)，导向环(6)，所述的浮子(2)的上端置于限位环(4)内，所述的测量管(3)为锥形管，所述的浮子(2)为直径不等的导向圆柱体，该导向圆柱体与所述的测量管(3)的锥形内壁配合。

When a capillary tube, in whose inner hole an optical fiber has been fixed and whose axial deviation amount between an outer peripheral surface of the capillary tube and a core center of an end surface of the optical fiber is 1.5 mum or less, is inserted into the insertion portion of the thin tube and the end surface of the optical fiber is fixed at a position at which a distance of the end surface to a focal point position of the partially spherical lens becomes -40 mum or less, emission light has an emission light bend of 0.2 DEG or less with respect to the center axis of the thin tube.

当将光纤固定在内孔且外周面与光纤的端面的纤芯中心的轴偏移量在1.5μm以内的毛细管插入细管的插入部，并且将光纤的端面固定于部分球面透镜的焦点位置±40μm以内的距离的位置上时，出射光曲率为出射光相对细管中心轴在0.2°以内。

The influence of several parameters including injection rate of nozzle exit, the ratio of length between nozzle and inner gular tube, the ratio of length between gular tube and it's inner diameter and back pressure on the performance of gas solid injector is analyzed.

分析了喷嘴出口射流速度、喉嘴距、混合管段尺寸及背压等参数对气固喷射器性能的影响，结果表明：存在最佳的喷嘴出口射流速度、喉嘴距以及喉管长与其内径之比使得固气比达到最大值；而背压的增加则不利于提高喷射器性

Barrel is the key part of artillery. In shot process, propellent gas of high pressure and high temperature flows in the tube at a high rate of speed, which brings an upheaval to the temperature field of the composite barrel. As to the composite barrel with metal inner, its poor thermal conductivity is more likely to cause uneven temperature distribution and bigger temperature gradient, to produce improper deformation and to make the work temperature of metal inner rise, all of which will affect the life span of barrel.

身管是火炮的关键部件，在火炮发射过程中，高温、高压的火药燃气在身管内成脉冲式高速流动，使身管受到急剧的加热，引起身管壁内的温度急剧变化，而对于带金属内衬复合材料身管，由于复合材料导热性能较差，更容易引起非均匀温度分布以及较大的温度梯度，产生不合适的变形，也会使身管的金属内衬的工作温度升高，从而使得身管的寿命降低，同时身管的发热会引起其刚度的变化，增大射弹散布。

The optimal structures are the ratioof inner and outer tube diameter being 0.71, the ratio of inner and outer tubeheight being 0.40, sparger with 50% porosity, the volume ratio of filler toreaction mass being 4.0%.

确定最佳反应器结构为：内外管高度比h/H=0.40，内外管管径比d/D=0.71，填料体积占反应物系总体积4.0%，开孔率50%的圆形渐缩式喷嘴。

The ring has a central annular body portion (21) with a raised bearing surface (22) thereon adapted to contact the inner surface of said calandria tube and prevent contact between said outer surface and said inner surface.

该环件具有一环形的中心体部分（21），该部分具有一适于和所述排管容器管的内表面接触的凸起的环形支承面（22），并且可以防止所述外表面与所述内表面接触。

Under different structural parameters of exit tube,including the inner diameter and the structure shape,the separation efficiency and pressure drop of the guide vane cyclone tube were measured by comparative experiments and the flow field in the guide vane cyclone tube was measured by an intelligent five-hole pilot tube.

通过对比实验测定了不同排气结构下导叶式旋风管的分离效率及压降，同时用智能型五孔球探针测试仪测定了不同排气结构的旋风管内流场分布，结合性能实验与流场测量的结果，研究了排气芯管内径及其结构型式对分离性能的影响，为旋风管结构优化和开发及其分离机理的研究提供了一定的实验基础。

A fiber plastic tube with infiltration resistance membrane is dipped with composite resin to form a composite flexible tube, than the tube is turned inside out by hydraulic pressure and, as a lining, adhibited on inner wall of an old pipeline.

该技术采用有防渗透薄膜的纤维塑料软管，并经复合树脂充分浸渍形成纤维塑料复合软管，再通过水压将软管翻转并内衬在需修复的旧管道内壁，固化后形成一条坚固光滑的纤维塑料复合新管。

They weren't aggressive, but I yelled and threw a rock in their direction to get them off the trail and away from me, just in case.

他们没有侵略性，但我大喊，并在他们的方向扔石头让他们过的线索，远离我，以防万一。

In slot 2 in your bag put wrapping paper, quantity does not matter in this case.

在你的书包里槽2把包装纸、数量无关紧要。