查询词典 ink ball

Plastic material used in the production business card printing and membership card making business already has several decades of history, as the UV ink/gloss, plastic substrate for UV ink business card printing and membership card making to business card printing and membership card factory and ink manufacturers came up with the biggest problem is how to make a UV ink/varnish Remover adhension in the plastic substrate surface, that is, the demon.

塑料承印质料搁置在制卡和会员卡制作行业洋已有几十年汗青，随著uv油不朱/平油的风行，在塑料承印物上举行uv油不朱制卡和会员卡制作给制卡和会员卡制作厂和油不朱厂家提议了陈的课题，最不小题目是如何使uv油不朱/平油不结实不天黏附在塑料承印物暗不天，即附著性题目。

Printing of the material is usually PVC or PET, these materials can not absorb ink to dry, we are using UV Ink (UV Solid-ink) printing, UV Ink in 0.5 seconds by UV drying time, the printing speed up to 6,000 / hour or more.

印刷层的材料通常是PVC或PET，这些材料不能以吸收油墨来干燥，我们采用UV油墨印刷，UV油墨能在通过紫外光0.5秒的时间内干燥，所以印刷速度可达6000张/小时以上。

Water monlchamus more phenomenore: excessive moisture when suites, the ink will be lighter, often blind think ink small more inking, long self-repeating, innovativeink emulsive lost stability, resulting in a vicious cycle of ink imbalance, resulting in serious emulsive innovativeink, heap to get ink roller surface, so that the business card printing and membership card produced is not working properly.

火不小不朱多的本体阐不收：当版面火分过度时，不朱色会变浅，不常会盲目的觉得不求不朱度多，因而不停补充不朱度，不幼工夫的轮回往复，油不朱乳化获得了稳定性，变成火不朱不不不均的不良性轮回，导致油不朱惨重乳化，堆聚在不朱辊暗地，使制卡和会员卡制作无法变态举行。

Water monlchamus more phenomenore: excessive moisture when suites, the ink will be lighter, often blind think ink small more inking, long self-repeating, innovativeink emulsive lost stability, resulting in a vicious cycle of ink imbalance, resulting in serious emulsive innovativeink, heap to get ink roller surface, so that the business card printing and membership card produced is not working properly.

火不小不朱多的本体阐不收：当版面火不合功度时，不朱色会变浅，不常会盲目的觉得不求不朱度多，因而不停补充不朱度，不幼工夫的轮回往复，油不朱乳化获得了安定性，变成火不朱不不不均的不良性轮回，导致油不朱惨重乳化，堆聚在不朱辊暗地，使制卡和会员卡制息无法变态举行。

The process of ink wash: salsa in the rollers on petrol and water washing cars, scraping housed in the position of the ink wash Manger tightening adjusting screw, rubber knife radiofrequent 40 ° angle and offset printing machine that corresponds to the string of roller surface contact, oscillating roll vertical and horizontal movement, the system of old ink and petrol branded washing by rubber knife strickle to your ink tank.

洗不朱的历程：在不朱辊底下浇上汽油和洗车火，不兵刮不朱器不乱设在洗不朱的场所槽边，拧不紧调度螺丝，使橡皮刀呈40°角度与胶印机相差答的串不朱辊暗不天隔绝，串不朱辊纵向和横向活不静，不兵输不朱编制上的不新不朱和汽油绵绵不断不天堵住橡皮刀刮洗到收不朱槽边面。

We select the polyamide resins, the polyurethane resin mixed with isopropyl alcohol and ethyl acetate component solvent, form the plastic printing ink of non-benzene solvent, use the IGT printability meter, the transmission density meter, the magnetic force mixer and many kinds of measuring instrument, measure the sample printing ink printed on the commonly used package printing film. The performance, the printability and the color characteristic of non-benzene solvent ink for plastic film printing were researched with the development printing ink sample.

结合与之相适应的树脂、颜料和助剂，开发研制了以聚酰胺树脂、聚氨酯树脂与醇、酯混合溶剂形成油墨连结料的无苯型塑料凹印油墨，并结合塑料凹印工艺要求，采用IGT印刷适性仪、透射密度仪、磁力搅拌器等多种测试仪器，通过对各种包装常用承印材料及样品油墨的测试，探讨了研制油墨样品的性能、印刷适性和颜色特性。

The ink in ink, some of them are old new ink cartridges, as well as some of them are new ink surface or boundary

油不朱外的不朱皮，有的是不陈不朱盒拆陈不朱变成的，也有的是陈不朱暗地或外

Ball-point pen should be fluent in and out, the more ink, but the negative effect is the drop-ink and more ink down to fewer defects are not fluent.

圆珠笔应在进出流畅，更墨水，但负面影响是辍学墨水和油墨到更多的缺陷较少，不流利。

The effect of tribology factors on bearing vibration is studied experimentally. AR model and WPT are used to processing the normal arid abnormal signals. The results are as follows:1. The vibration of ball bearings is caused by the tribology action of contact pairs of ball and ring races and has the essential of tribo-dynamics. Any factors affecting the tribology characteristics of contact pairs will affect vibration and noise of bearings consequently.2. Vibration characteristics of bearing keep almostly unchanged with the increasing of axial load expecting the increasing of nature frequencies. When radial load increasing with axial load unchanged, nature frequencies keep unchanged but some new vibration peaks appears in the spectrum.3. Vibration amplitudes are damped and nature frequency are enhanced with sufficient lubrication. Vibration and noise of bearings increase obviously and roar can happen and the contact surfaces scratch slightly under insufficient and unclean lubrication state. Bearing will be disabled in a few minutes without any lubrication.4. Bearing vibration is unstable under low speed. With the speed increasing, the vibration become stable and natural frequencies increase slightly but the amplitudes increase apparently.5. Bearing vibration can be excited only by some harmonics ofwaviness without lubrication and by all harmonics with lubrication based on the theoretical analysis.6. The nature frequencies of ball bearings decrease with the increasing sizes. When international clearance increasing, nature frequencies decrease in radial and increase in axial and angular and the amplitudes increase in radial and decrease in axial and angular. When the number of balls increasing, nature frequencies increase and amplitudes decrease. When the pitch diameter increasing, axial nature frequency increase and others nearly keep no change. When outer race groove curvature radius increasing, nature frequencies increase in radial and decrease in axial and angular and amplitudes keep no change in radial and increase in axial and angular. When inner race groove curvature radius increasing, nature frequencies decrease and amplitudes increase.7. The distortion in amplitude and frequency components of bearing vibration signals picked up by the present probe measurement method is founded and right conclusions cannot be achieved by the signals. When accelerometer is rigidly screwed with steel stud onto a flat outer surface of a ball bearing, vibration signal can be got without distortion and the reliability of research on bearing vibration is assured.8. AR model is suitable for large samples of bearing vibration signals, square root of length of samples can be used as the upper limitation of order determination and the FPE order selection criterion is effective. Many advantages of AR spectrum are founded over the classical based on FFT.9. Time-Frequency analysis is necessary for abnormal noise of ball bearings. WPT overcomes the principle shortcomings of STFT and proved to be a best tool to process the abnormal signals.

理论分析和试验研究表明： 1球轴承振动是钢球—滚道接触副中的各种摩擦学作用引起的，具有摩擦动力学的本质，任何对接触副的摩擦学特性有影响的因素都将对球轴承的振动和噪声特性产生影响； 2中心轴向载荷作用下，载荷增大使球轴承的固有振动频率升高，载荷越大同样的载荷增幅引起的频率升幅减小，足够大的中心轴向载荷作用下载荷的变化对球轴承振动的频率特性不会产生明显的影响； 3轴向和径向联合载荷作用下，径向载荷不大时球轴承振动的固有频率基本不变，但是可能引起变刚度激励的非线性振动，出现新的频峰，过大的径向载荷将使部分钢球脱离接触，使球轴承的振动和噪声呈现不稳定状态； 4润滑对球轴承的振动和噪声特性有重要的影响，良好的润滑对振动有明显的抑制作用，润滑不充分时，振动和噪声的水平会有明显增高，一定条件下还会激发接触副中的谐振，发出啸声，造成接触表面的伤害，无润滑干接触时，短时的运转就会损伤接触副表面，使振动和噪声迅速增大，并随时可能引发严重的磨损和卡滞失效；接触副润滑良好时，油膜的"刚化效应"使球轴承振动的固有频率有所提高，润滑剂中含有弥散性污浊时，振动的幅度总体升高，但弥散性污浊不会改变球轴承振动的频率特性；浙江大学博士学位论文：球轴承振动的研究 5低速时，球轴承振动的基本特征呈现不稳定状态，随着转速的提高，球轴承振动的频率特性趋于稳定，固有频率频峰升高； 6理论分析表明，干接触时钢球和滚道表面波纹度的某些谐波分量能激励球轴承的振动，振动的幅值与谐波幅值成正比，实际球轴承中钢球的分布不可能完全均匀，波纹度的激励作用会随时发生；润滑接触的分析表明，波纹度的任意谐波分量均能激励球轴承的振动； 7球轴承的几何和结构参数分析表明，球轴承尺寸越大，径向、轴向和角振动的固有频率越低；钢球中心圆直径增大，球轴承的径向和轴向振动的固有频率基本不变，角振动的固有频率有所上升，振动的幅频特性基本不变；径向游隙加大使球轴承的径向振动固有频率降低，轴向和角振动的固有频率有所升高，径向振动幅频特性的幅值升高，而轴向和角向降低；钢球的数量增多使球轴承振动的固有频率上升，幅频特性的幅值下降，径向振动的幅值下降最为明显；外圈沟曲率半径系数增大使球轴承径向振动的固有频率升高，轴向和角振动的固有频率降低，径向幅频特性基本不变，轴向和角向幅频特性幅值升高；内圈沟曲率半径系数增大使径向、轴向和角振动固有频率均下降，振动幅频特性的幅值均有升高； 8试验对比表明，传感器采用探针式安装时，由于探针接触副接触特性的影响，钡(量得到的球轴承振动信号有失真，采用专门设计和制作的试验球轴承，以固定式安装加速度计，首次测量得到了球轴承振动的真实信号，通过对振动信号的分析，验证了球轴承振动的理论模型； 9)基于时间序列分析的AR模型适用于大样本球轴承振动信号的分析，以样本长度的均方根值作定阶上界，FPE做判阶准则，给出的AR谱光滑，频率分辨率高，是球轴承振动分析的简便而可靠的手段； 10以时频域分析的小波包变换分析球轴承异音信号能够比较好地定位和聚焦异音发生的时间，时间间隔，频率范围，同样是球轴承振动分析的可靠的手段，可用作球轴承故障诊断技术。

This research presented a new guide mechanism and belt driving theory of the abrasive band polishing for inner aperture, satisfied the driving requirement of abrasive belt leading smoothly into grinding area, realized the band grinding and band polishing of inner aperture, developed a abrasive band polishing headstock for of the ball track of ball bearing and roller bearing individually adopting a way of curvature concave oscillating and vibrating, researched the process regular and fundamental process method and parameter of abrasive band polishing of ball track. The results of experiments and tests showed that the surface roughness of ball track by abrasive band polishing can reach Ra0.02μm, and the original geometric cross section shape precision of ball track can be kept.

本项研究提出了砂带研抛内孔的新型导引机构和传带原理，满足了砂带平稳导入内孔磨削区的传动要求，实现了内孔的砂带磨削和研抛；研制了采用弧面摆动和振动方式分别用于球轴承滚道和滚柱轴承滚道研抛的砂带研抛头架；研究了轴承滚道砂带研抛的工艺规律和基本工艺方法、工艺参数；实验测试结果，轴承滚道砂带研抛的表面粗糙度达Ra0.02μm，研抛过程保持了滚道的原始几何截面形状精度。

I think people in this lifetime in a rebirth.

我觉得人在这一生里其实也在轮回。

He had to tie her hands together.

他不得不把她的双手绑在一起。