查询词典 increasing function

The effect of tribology factors on bearing vibration is studied experimentally. AR model and WPT are used to processing the normal arid abnormal signals. The results are as follows:1. The vibration of ball bearings is caused by the tribology action of contact pairs of ball and ring races and has the essential of tribo-dynamics. Any factors affecting the tribology characteristics of contact pairs will affect vibration and noise of bearings consequently.2. Vibration characteristics of bearing keep almostly unchanged with the increasing of axial load expecting the increasing of nature frequencies. When radial load increasing with axial load unchanged, nature frequencies keep unchanged but some new vibration peaks appears in the spectrum.3. Vibration amplitudes are damped and nature frequency are enhanced with sufficient lubrication. Vibration and noise of bearings increase obviously and roar can happen and the contact surfaces scratch slightly under insufficient and unclean lubrication state. Bearing will be disabled in a few minutes without any lubrication.4. Bearing vibration is unstable under low speed. With the speed increasing, the vibration become stable and natural frequencies increase slightly but the amplitudes increase apparently.5. Bearing vibration can be excited only by some harmonics ofwaviness without lubrication and by all harmonics with lubrication based on the theoretical analysis.6. The nature frequencies of ball bearings decrease with the increasing sizes. When international clearance increasing, nature frequencies decrease in radial and increase in axial and angular and the amplitudes increase in radial and decrease in axial and angular. When the number of balls increasing, nature frequencies increase and amplitudes decrease. When the pitch diameter increasing, axial nature frequency increase and others nearly keep no change. When outer race groove curvature radius increasing, nature frequencies increase in radial and decrease in axial and angular and amplitudes keep no change in radial and increase in axial and angular. When inner race groove curvature radius increasing, nature frequencies decrease and amplitudes increase.7. The distortion in amplitude and frequency components of bearing vibration signals picked up by the present probe measurement method is founded and right conclusions cannot be achieved by the signals. When accelerometer is rigidly screwed with steel stud onto a flat outer surface of a ball bearing, vibration signal can be got without distortion and the reliability of research on bearing vibration is assured.8. AR model is suitable for large samples of bearing vibration signals, square root of length of samples can be used as the upper limitation of order determination and the FPE order selection criterion is effective. Many advantages of AR spectrum are founded over the classical based on FFT.9. Time-Frequency analysis is necessary for abnormal noise of ball bearings. WPT overcomes the principle shortcomings of STFT and proved to be a best tool to process the abnormal signals.

理论分析和试验研究表明： 1球轴承振动是钢球—滚道接触副中的各种摩擦学作用引起的，具有摩擦动力学的本质，任何对接触副的摩擦学特性有影响的因素都将对球轴承的振动和噪声特性产生影响； 2中心轴向载荷作用下，载荷增大使球轴承的固有振动频率升高，载荷越大同样的载荷增幅引起的频率升幅减小，足够大的中心轴向载荷作用下载荷的变化对球轴承振动的频率特性不会产生明显的影响； 3轴向和径向联合载荷作用下，径向载荷不大时球轴承振动的固有频率基本不变，但是可能引起变刚度激励的非线性振动，出现新的频峰，过大的径向载荷将使部分钢球脱离接触，使球轴承的振动和噪声呈现不稳定状态； 4润滑对球轴承的振动和噪声特性有重要的影响，良好的润滑对振动有明显的抑制作用，润滑不充分时，振动和噪声的水平会有明显增高，一定条件下还会激发接触副中的谐振，发出啸声，造成接触表面的伤害，无润滑干接触时，短时的运转就会损伤接触副表面，使振动和噪声迅速增大，并随时可能引发严重的磨损和卡滞失效；接触副润滑良好时，油膜的"刚化效应"使球轴承振动的固有频率有所提高，润滑剂中含有弥散性污浊时，振动的幅度总体升高，但弥散性污浊不会改变球轴承振动的频率特性；浙江大学博士学位论文：球轴承振动的研究 5低速时，球轴承振动的基本特征呈现不稳定状态，随着转速的提高，球轴承振动的频率特性趋于稳定，固有频率频峰升高； 6理论分析表明，干接触时钢球和滚道表面波纹度的某些谐波分量能激励球轴承的振动，振动的幅值与谐波幅值成正比，实际球轴承中钢球的分布不可能完全均匀，波纹度的激励作用会随时发生；润滑接触的分析表明，波纹度的任意谐波分量均能激励球轴承的振动； 7球轴承的几何和结构参数分析表明，球轴承尺寸越大，径向、轴向和角振动的固有频率越低；钢球中心圆直径增大，球轴承的径向和轴向振动的固有频率基本不变，角振动的固有频率有所上升，振动的幅频特性基本不变；径向游隙加大使球轴承的径向振动固有频率降低，轴向和角振动的固有频率有所升高，径向振动幅频特性的幅值升高，而轴向和角向降低；钢球的数量增多使球轴承振动的固有频率上升，幅频特性的幅值下降，径向振动的幅值下降最为明显；外圈沟曲率半径系数增大使球轴承径向振动的固有频率升高，轴向和角振动的固有频率降低，径向幅频特性基本不变，轴向和角向幅频特性幅值升高；内圈沟曲率半径系数增大使径向、轴向和角振动固有频率均下降，振动幅频特性的幅值均有升高； 8试验对比表明，传感器采用探针式安装时，由于探针接触副接触特性的影响，钡(量得到的球轴承振动信号有失真，采用专门设计和制作的试验球轴承，以固定式安装加速度计，首次测量得到了球轴承振动的真实信号，通过对振动信号的分析，验证了球轴承振动的理论模型； 9)基于时间序列分析的AR模型适用于大样本球轴承振动信号的分析，以样本长度的均方根值作定阶上界，FPE做判阶准则，给出的AR谱光滑，频率分辨率高，是球轴承振动分析的简便而可靠的手段； 10以时频域分析的小波包变换分析球轴承异音信号能够比较好地定位和聚焦异音发生的时间，时间间隔，频率范围，同样是球轴承振动分析的可靠的手段，可用作球轴承故障诊断技术。

The results of cold-flow model test indicate:(1) the pressure drop rises with increasing air quantity and solids quantity respectively, however, much more air quantity and solids quantity minish in the same height position;(2) the pressure drop rises with increasing solids quantity;(3) the average granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity in the same level position;(4) the inhomogeneity of distribution granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity in the same level position.

结果表明：(1)在同一高度截面上，循环流化床反应器炉膛内压降随风量的增加而增加，但是风量过于增大反而使压降在同一截面上减小；(2)压降随初始物料量的增加而增加；(3)在同一水平截面上，颗粒浓度随风量的增大而逐渐减小，随物料量的增大而增大；(4)颗粒浓度分布的不均匀性随风量的增大逐渐减小，随物料量的增加不断增大。

Though comparing Canny operator and center B spline dyadic wavelet, the following conclusion is proven in this dissertation: a Center B spline function has tight support and Canny operator hasn't. b Center B spline function asymptotic convergence to Gaussian function and the derivative of Center B spline function asymptotic convergence to Canny operator. c The derivative of fourth order center spline B function is more suitable as a optimal edge detector than Canny operator. d Center B spline function can balance the smoothing and approximation of original data, and the fourth center B spline function is the only optimal solution of two order smoothing problem. e The error between the valve of time-frequency uncertainty of the fourth center B spline function and the lower bound of time-frequency uncertainty does not exceed 0.143% of the lower bound. f The derivative of center spline B function can construct a stability dyadic wavelet and can give a fast algorithm for multiscale edge detection, but Canny operator can do neither.

作者给出了Canny算子与中心B样条二进小波严格的比较证明，得出如下结论：a中心B样条函数具有紧支集，Canny算子不具有紧支集。b中心B样条函数的极限收敛于高斯函数，中心B样条函数的导数收敛于Canny算子。c四阶中心B样条函数的导数比Canny算子更接近最佳边缘检测滤波器。d中心B样条函数比高斯函数更能兼顾对原函数平滑和逼近的折中要求，并且四阶中心B样条函数是二阶逼近问题的唯一最优解。e四阶中心B样条函数的时频测不准关系值与时频测不准关系下界的逼近误差不超过0.143％。f中心B样条函数的导数可以构成稳定的二进小波，存在快速的多尺度算法；而Canny算子不构成稳定的二进小波，无法给出快速的多尺度算法。

The problem of multi-objective usually meet many conflict each other and can not use the objective of the same standard unit, then to employ membership function of fuzzy theory,at first each objective function to change fuzzy set and express with membership function, membership function include the maximum constraint, minimum constraint, the decrease function of monotonic property, to become optimal of the multi-objective function, but still to scanty of weighting value with regard to adjustment of objective function, thus this thesis proposes the method of combine orthogonal arrays and particle swarm optimization to solve the problem of multi-objective optimal power flow, each objective function separately add weighting value, to setting each weighting value of objective function in order to the result of anticipating.

多目标最佳化的问题通常会面临到许多互相冲突且不能用同ㄧ标准单位的目标，於是利用模糊理论中的归属函数，首先将各目标函数转换成模糊集合并以归属函数表示，归属函数包含了最大限制值、最小限制值、单调的递减函数所组成，将各目标函数利用归属函数表示，形成单一目标函数的最佳化，但是仍缺乏权重值对於目标函数的调整，於是本篇论文提出ㄧ种权重值设定与粒子群优演算法的方法去解决多目标最佳电力潮流的问题，将各目标函上分别加上权重值设定各目标函数的权重值，得到预期的效果。

Along with the time development, the computer technology more and more thorough various trades and occupations, have provided thorougher and a convenient service for the general users In order to realize raises department's working efficiency, uses the resources fully, reduces the nonessential manpower, physical resource and financial resource goals and so on disbursement, presented various information management system The paper will design university student's dormitory information management system's Web and realizes using the solution The university student's dormitory information management system is one safe and the highly effective proprietory system, designs specially for the information engineering institute This system has used many technologies, for instance JSP, JDBC, Web service and so on The proprietory system use's database is SQL the Server 2000 databases The university student's dormitory information management system's major function includes: May realize to the student's dormitory information inquiry function, including fast inquiry function and classified inquiry function; To the student's dormitory information's input function, the revision function, deletes the function and the statistical function Realizes the dormitory Control section through the system above function regarding the student's dormitory information current management, namely facilitates the dormitory administrative personnels to keep abreast of the student lodging situation and the billeting situation comprehensively promptly; Has provided some simple data inquiry for the user and outputs each kind of information and so on

随着时代的发展，计算机技术越来越深入各行各业，为广大的用户提供了更为周到和便捷的服务。为了实现提高部门的工作效率，充分利用资源，减少不必要的人力，物力和财力的支出等目的，出现了各种各样的信息管理系统。论文将设计一个高校学生公寓信息管理系统的Web应用解决方案并予以实现。高校学生公寓信息管理系统是一个安全和高效的专用系统，专为信息工程学院设计。这个系统使用了很多技术，比如JSP，JDBC ，Web服务等。专用系统使用的数据库是SQL Server 2000 数据库。高校学生公寓信息管理系统的主要功能包括：可以实现对学生公寓信息的查询功能，包括快速查询功能和分类查询功能；对学生公寓信息的录入功能，修改功能，删除功能和统计功能。通过系统上述功能实现公寓管理部门对于学生公寓信息的日常管理，即方便公寓管理人员及时全面地掌握学生住宿情况及公寓分配情况；为用户提供了一些简单的数据查询并输出各种信息等。

Properties of efficient portfolios and the efficient frontier to the model are systematically analyzed. Our main results concerning the properties are: every efficient portfolio can be solved by minimizing portfolio risk under a given level of portfolio return or by maximizing portfolio return under a given level of portfolio risk; on the efficient frontier, the risk is a convex and strictly increasing function of the return and the return is a concave and strictly increasing function of the risk; the utility function on the efficient frontier can be expressed as a quasi-concave function of the risk or the return if the investor's utility function is quasi-concave.

从理论上系统地对该模型下的有效投资组合和有效前沿的性质进行了分析，结果表明：每一个有效投资组合可通过在给定期望收益水平的条件下最小化投资组合风险来获得，或者在给定风险水平的条件下最大化期望投资组合收益来获得；在有效前沿上，风险是收益的严格单调递增凸函数，收益是风险的严格单调递增凹函数；当投资者的效用函数是拟凹函数时，则有效前沿上的效用可表达成风险或收益的拟凹函数。

In the case of granite, observation results indicate that the extending routes of active cracks are mainly intercrystalline, transcrystalline, inter-transcrystalline, and intracrystalline. When the strain rate is low, the long intercrystalline cracks are prevailing, and with increasing of the strain rate, the short transcrystalline and intracrystalline cracks gradually increase. The statistic results show that the active crack density increases with increasing of the strain rate, and the mean length of active cracks diminishes with increasing of the strain rate, that is, the induced damage in comminuted product increases with increasing of the strain rate. For the first time this dissertation integrates macroscopic results of comminution with active crack growth under impact loading. It elucidates why the dynamic comminution strength of mineral beds increases with increasing of the strain rate through the active crack extending, and analyzes the influence of structure and constitution of minerals on their damage under impact stress. It is authenticated that both the size distribution and the damage population of comminuted product can be characterized by the fractal.

为分析料层颗粒在冲击下的细观损伤效果，采用德国生产的ASM68K半自动图象分析仪对粉碎生成物中的损伤情形进行了观测，以花岗岩为例，观测结果表明花岗岩颗粒在冲击应力下的活化裂纹扩展路径主要表现为沿晶、穿晶、沿穿晶和晶内等形式，在低应变速率下，活化裂纹以沿晶裂纹较多，随着应变速率的提高，其它裂纹形式大量繁衍，统计结果表明活化裂纹密度随着应变速率的增大而增大，活化裂纹的平均长度随着应变速率的增大而减小，综合表现为颗粒的细观损伤程度随着应变速率的增大而增大；首次将应力作用下的活化裂纹演化特征与粉碎的宏观效果相联系，并就料层动态粉碎强度随应变速率增大而提高的现象从裂纹演化特征的角度进行了解释；分析了矿岩构造结构特性对损伤产生和分布的影响。

And also the device was simulating. The results of cold - flow model test indicate that pressure drop rises with increasing air quantity and solids quantity respectively, however, much more air quantity will make pressure drop minish in the same height position;The average concentration of granule minishes with increasing air quantity, and rises with increasing solids quantity in the same height position;The inhomogeneity of distribution of the average granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity.

冷态实验结果表明：流化床内同一高度截面与基准面之间的压差是随风量的增加而增加的，但是风量过于增大反而使同一高度截面与基准面之间的压差减小了，同时，压差是随初始物料量的增加而逐渐增加的；在同一高度截面上，颗粒平均浓度随风量的增大而逐渐减小的，随物料量的逐渐增大而增大的；颗粒浓度分布的不均匀性随风量的增大而逐渐减小，而随物料量的增加而不断增大的。

Single factor experiments were done with the factors including the width of protrusion and the trolley's velocity, which showed that the surface frictional coefficient decreases with the width of protrusion increasing, and doesn't change with the trolley's velocity changing, which was consistent with the results of the orthogonal experiment. A theoretical model of the horizontal projection of a corrugated bionic surface's contact area was built, which showed that the contact area's horizontal projection decreases with width and interval increasing respectively and that the ratio of the contact area's horizontal projection and the vertical load decreases with the vertical load increasing. It indicated that the surface frictional coefficient decreases with the above three factors increasing respectively. Finite element modeling and analysis of interactions of a plate and soils was done using ANSYS, which showed that the plate frictional coefficient is little relative to soil elastic modulus and decreases with vertical surface pressure and that trolley's pull and vertical displacement of bionic surface's control pilot keep constant almost during the plate being pulled. Finite element modeling and analysis of interactions of a corrugated bionic surface and soils was done using ANSYS, which showed that surface frictional coefficient is little relative to soil elastic modulus and decreases with bionic surface's structural parameters and vertical pressure increasing. However, the three factors all didn't affect the surface frictional coefficient remarkably on the condition of 90% dependability. For the first time, bionic surfaces were applied to screw piles, which formed bionic screw piles, and the contrast experiments showed the bionic screw pile had certain resistance-decreasing effects.

建立了波纹型仿生曲面与土壤的接触面积的水平投影的理论模型，表明接触面积的水平投影A随着波纹型仿生曲面突起宽度、两相邻突起间距的增大而减小，接触面积的水平投影与波纹型仿生曲面表面垂直载荷之比随着波纹型仿生曲面表面垂直载荷的增大而减小，进而得出仿生曲面摩擦系数随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小；利用ANSYS软件对平板与土壤的相互作用进行了有限元建模与分析，表明平板摩擦系数与土壤弹性模量关系不大，而随着表面垂直载荷的增大而减小；平板牵引过程中台车牵引力和仿生曲面控制节点垂直方向位移基本保持不变；利用ANSYS软件对波纹型仿生曲面与土壤的相互作用进行了有限元建模与分析，表明波纹型仿生曲面系数在一定范围内基本不受土壤弹性模量的影响，随着波纹型仿生曲面突起宽度、两相邻突起间距以及表面垂直载荷的增大而减小，但在可信度为90％的前提下，三个因素影响都不显著；首次将波纹型仿生曲面应用于与土壤作用方式以挤压为主的螺旋桩，形成仿生螺旋桩，并与普通螺旋桩进行了沉桩对比试验，表明波纹型仿生曲面应用于螺旋桩桩体表面具有明显的降阻作用。

The program is divided into five blocks: the main function, contracting keys function, numbers and decimal memory function, processing function, the value function, display function,rest function and positive and negative function.

将程序分为五个模块：主函数、判键函数、数字和小数点存储函数、运算处理函数、求值函数、显示函数、正负和清零处理函数。

Metrorrhagia is also gynaecological problems of common diseases.

崩漏是妇科常见病也是疑难症。

WordFTP gives you the convenience and timesaving you need.

wordftp让您的方便和省时您所需要的。