查询词典 high iron

However, due to its high-phosphorus iron ore oolitic hematite, phosphate ore has reached 0.3%-1.8%, much higher than the phosphorus content of iron ore industry must be 0.2 percent in the standard, coupled with transportation inconvenience that this has been sleeping underground mineral resources to be developed in the state.

但由于其铁矿为高磷鲕状赤铁矿，矿石的含磷达到了0.3％－1.8％，大大高于工业铁矿含磷量必须在0.2％的标准，加上交通运输不便，这一矿产资源一直沉睡地下而处于待开发状态。

Gate is glass reinforced plastic and cast-iron.Type PM flapper gate is made of cast-iron or steel for the accasions of little pressure loss and high impact force. Its outshape is classed to two types: rectangle and roundness, and would

PM 型拍门主要用于对管道压力损失要求不高，一般直接安装于水泵的出口端，耐冲击力较高的场合，制作材料可采用铸铁、玻璃钢或钢件，外形分为方形和圆形，稍加改造

In this paper, the preparations, analytical methods, physical characteristics of ferrates and the application of ferrates in the fields of synthesis of organic compounds, treatment of waste water and the usage as cathode material in alkaline batteries are summarized. The electrochemical preparation of sodium ferrate is described and the relationships between the main parameters in the process are deeply investigated. One method of in-situ electrosynthesizing potassium ferrate of high purity with both high efficiency and low energy consumption is invented. The cyclic voltammogram and feature characterization of iron anode in alkaline solutions is studied. One preparation method of ex-situ electrosynthesizing tripotassium sodium ferrate of high purity is created.

本文概述了高铁化合物的制备方法、分析方法、物理化学性质及其在氧化合成有机物、水处理和用作碱性电池正极材料等领域的应用；深入系统地研究了高铁酸钠的电化学制备及其影响参数之间的关系；研发了一种高效率低能耗直接电合成高纯度高铁酸钾的工艺方法；探讨了铁电极在浓的苛性碱溶液中的循环伏安特征及其极化特征；研发了一种电化学制备高铁酸三钾钠的工艺方法并用多种现代分析测试技术对K_3Na(FeO_4，)_2进行了表征。

"MAIRON-P" is high purity iron powder prepared by mechanical pulverization of electrolytic iron, As unannealed, it is rich in chemical reactivities, and also excellent in solubility.

&MAIRON-P&是用机械破碎电解铁得到的高纯铁粉，未经退火，富有化学活性，具有优异的可溶性。

You can use a seamed-in solid surface sink, a high-quality stainless steel, a cast iron undermount sink, or a cast iron basin sink.

您可以选用无缝人造石星盆，也可以选用不锈钢盆，还可以使用浇铸底盆或面盆。

It is shown from study results that the soluble iron has a strong controlling effect on the phytoplanktonic growth, and most of soluble iron is chelated with ligand such as siderophore with high affinity to Fe 3+.

研究表明，可溶性铁对浮游植物生长有很强的控制作用，大部分可溶性铁是同具有极强铁亲和力的配位体螯合在一起的，如铁载体。

This research is a new low cost method of producing abrasive grit. It is to put the iron ore concentrate, coal powder, hydrated limed and addition agent together to make coal mixed pellet in prior which is rapidly auto-reduced in high temperature and kept about 10min above 1350℃, and then furnace cooled. The 2CaO·SiO2 of slag phase change、volume increase and natural bloom in reduction process. Finally we obtain no-slag abrasive grit through screen separation , in which the iron yield can be above 90%,the sulfur content can be below 0.05% and carbon content is lower than 4.0%.

本研究是一种全新的低成本生产铁粒的方法，它是将铁精粉、煤粉、消石灰和添加剂预先制成球团，在高温下迅速加热还原，在1350℃以上保温10分钟后随炉冷却，渣相中2CaO·SiO2在冷却过程中发生相变，体积膨胀而自然粉化，通过筛分便可以得到不含炉渣的铁颗粒，铁的收得率在90%以上、S≤0.05%、C在4.0%左右。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

Special attention should be paid that the solder wires should directly contact the iron heads. Since the temperature of iron heads is very high, this will easily cause spatters, or may burn workers when the case is severe.

特别要注意的是不能将焊锡线直接接触烙铁头，因为烙铁头温度很高，这样操作很容易造成飞溅，严重时可能烫伤工人。

Reducing agent carbon reduces oxide of cobalt, nickel and iron,and sulfuring agent Fe_2S forms trickles of matte at high temperature, inthe process of assembling and settling of trickles of matte slag is washed,reduced metals of iron, cobalt and nickel and sulphide in slag are enrichedin the matte to form cobalt matte and be separated from slag due to theirintimity to the matte, washing of the matte and their settling.

在高温下，还原剂碳将钴、镍、铁氧化物还原成金属，同时硫化剂硫铁矿形成锍滴，在锍滴聚集沉降过程中对炉渣进行&洗涤&，由于金属及金属硫化矿的亲锍性，锍体的&洗涤&作用及金属及金属硫化矿的沉降作用使被还原的钴、镍、铁金属及转炉渣中的金属硫化矿富集到锍体中，与转炉渣分离，形成钴冰铜。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。