查询词典 heat stability

Heat stability, high oxidation resistance, and good initial adhesive force.

与 SBS 、 EVA 、 SBR 有良好的相熔性。

Ti-Si composite materials are mixed at atomic scale, and Ti-O-Si bond appears in all of the samples with different TiO2 content; the mixed oxides are mainly existed in the form of amorphous pattern, anatase appears when the TiO2 content is more than 80%, but compared with the intension of pure TiO2, it has not integrate structure. The acetic content has great influence in the specific area and crystal structure of the mixed oxides. 20TiSi has good heat stability, still possesses 11m2/g after calcined at 1100℃; calcinations on the large scale of temperature does not cause the break of Ti-O-Si bond, TiO2 is well dispersed in 20TiSi calcined at 1100℃, and it still existed in the form of amorphous.

结果表明：制得的Ti-Si复合氧化物具有很高的比表面积，在TiO_2含量为10％时达到681.5m~2／g，Ti原子进入Si-O四面体结构中，形成Si-O-Ti键，复合氧化物的稳定性好，当TiO_2含量低于60 wt％时，以无定型形式存在；当含量为80％时，出现锐钛矿型TiO_2，但与纯TiO_2相比晶型不完整：醋酸对Ti-Si复合氧化物的比表面积、晶型都有很大的影响；TiO_2含量为20％的20TiSi经1100℃高温焙烧后，仍有较高的比表面积(11m~2／g)，稳定性好，在较宽的温度范围内焙烧，没有引起Ti-O-Si键的断裂，分散度高，没有出现晶型TiO_2。

The results of DSC and TG studies showed that the blends maintained the heat stability as that of the matrix. The dispersion of the reinforcing phase in the matrix can be well maintain under the circle heating and cooling heat treatment, which is important for its applications.

DSC和TG的研究结果表明，所获得的共混体系基本上保持了基体本身的热稳定性，同时共混体系的热稳定性还受到嵌段共聚物含量的影响；在反复的升降温过程中，嵌段共聚物在基体中的分散状态得到很好的保持，表现出相当的相结构稳定性，这一性质对于材料在工业上的应用意义重大。

Hypereutectic Al-Si alloy with the quality of low density, good heat stability and high wear-resistance, is an ideal wear-resistant and heat-resistant material.

中文摘要过共晶铝硅合金具有低密度、良好的热稳定性和高耐磨性，是一种理想的耐磨耐热材料。

Content of indigenous lipase in milk is low, and it's heat stability is bad.

乳脂酶中，内源酶的含量低、耐热性差、对乳制品品质的影响较小。

A considerable attention has focused on hybrid organic–inorganic nanocomposites in recent years. Organic–inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance.

近年来有机和无机杂化材料受到了广泛的重视和研究，有机和无机杂化材料具有有机材料的质地轻、柔软和可加工性能好以及无机材料的高强、高热稳定性和化学稳定性等特点。

The conclusions were as follows: theνO-H andνC=O IR absorption maxima shifted towards higher wave numbers after imprinting 17β-estradiol on TFMAA-co-TRIM copolymer with the red shift of theνO-H groups being apparent after precipitation polymerization for 16h while that forνC=O groups being observed after polymerization for 24h. A strong interaction between TFMAA and 17β-estradiol was confirmed by the high selectivity for 17β-estradiol, as indicted by the values of the separation factor of isomers of 17β-estradiol/17α-estradiol (2.28) and the imprinted factor (3.01). Particle diameter of TFMAA-co-TRIM polymer was between 300 nm and 1.5μm, which suited well for solid phase sorbent throughout at low column pressure. The recognition of imprinting TFMAA-co-TRIM polymer for sterol molecules was driven by enthalpy eluted with acetronitile, and low temperature was in favor of the separation of sterol structure analogues on imprinting column. TFMAA-co-TRIM polymer possessed of determinate anti-heat stability, with melting point beginning at 255.84℃, Tp=257.40℃, control TFMAA-co-TRIM polymer and imprinting TFMAA-co-TRIM polymer were respectively decompounded at 267.79℃and 343.11℃, and solid micro-extraction noddle prepared by the special polymerization also showed definite recognition for 17β-estradiol by GC/MS detecting at 270℃. By selection of various washing and elution solvents, elution reagents of close polymerization system were of more advantage in template molecules retention and recognition on molecularly imprinted solid phase extraction column. At a certain extent, progesterone, 17α-estradiol, 17β-estradiol and 4-androstene-3, 17-dione could be intercepted on the MISPE column. Especially, MISPE had high selectivity for progesterone, and imprinting TFMAA-co-TRIM polymer could achieve adsorption balance within 50 min by absorption kinetics test for 17β-estradiol. However, MISPE column showed better selectivity and enrichment property for 17β-estradiol than C18 and CSPE columns according to the data from HPLC and GC/MS analyses. Recovery of 17β-estradiol on MISPE column was up to 85.5% while when prime extracting solution of milk powder was sampled, the recovery of CSPE and C18 columns were 43.7% and 30.7%, respectively.

通过研究阐明：紫外聚合产物TFMAA-co-TRIM中的νO-H振动吸收峰在聚合16h后红移，νC=O振动吸收峰在聚合24h后红移；TFMAA-co-TRIM对雌二醇异构体的印迹因子达到了3.01，α为2.28，优于其它功能单体参与得到的聚合物识别特性；TFMAA-co-TRIM聚合物粒径介于300 nm至1.5μm之间，作为色谱固定相具有良好的通量和低的柱压；在乙腈流动相中，TFMAA-co-TRIM分子印迹固定相的分离过程主要被焓驱动，低温有利于分子印迹固定相分离甾醇结构类似物；TFMAA-co-TRIM分子印迹聚合物在255.84℃时开始熔融，Tp=257.40℃，聚合物CP的降解温度在267.79℃，MIP降解温度在343.11℃，制备的固相微萃取头初步经GC/MS 270℃的耐热性测定；不同的洗提溶剂筛选证明了选择接近聚合溶剂的洗脱体系更有利于MISPE发挥识别效应；分子印迹固相萃取柱对孕酮、17α-雌二醇、17β-雌二醇和雄烯二酮都具有不同程度的保留特性，可作为此类化合物的吸附材料，特别对孕酮强保留的富集特性，可作为孕酮的选择性识别吸附剂，其分子印迹聚合物对17β-雌二醇的吸附动力学测定显示在50 min内基本达到吸附平衡，具有作为传感器核心敏感材料的潜力；对比萃取奶粉中17β-雌二醇性能，MISPE柱比非分子印迹固相萃取柱和C18柱具有更高的保留，回收率依次为85.5%，43.7%和30.7%。

The results showed the rare-earth stearate as having excellent heat stability and resistance to weather, improving PVC's mechanical properties and processing behavior in a certain extent.

结果表明，硬脂酸稀土具有优异的热稳定性和耐候性，对PVC的力学性能、加工性能都有不同程度的提高。

The heat-stability and antioxidative activity of sulfhydryl s in soy protein hydrolysates were studied.

研究了大豆蛋白水解产物中巯基的热稳定性及抗氧化作用。

PBE possesses a good ability of anti-hydrolysis, and its thermolysis temperature may reach 320℃, the heat stability of which is better than that of MBE.

PBE抗水解性能强，热分解温度可达320℃，稳定性相比单体MBE有所提高。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。