查询词典 heat sink

In the analysis, firstly, the flux boundary condition is used to simulate the frictional heat resource between wheel and rail. The non-steady heat transfer between the contacting surfaces of the wheel/rail, heat-convection and radiation between the wheel/rail and the ambient were all taken into consideration. Therefore, a heat coupling model of the wheel/rail in rolling/sliding is put forward to calculate the frictional temperature rise in the wheel and rail. Secondly, after the temperature distribution of wheel/rail, due to friction, is calculated, substitute the thermal load with equivalent fictitious body force and boundary distributed force loaded on the nodes of the corresponding elements. The wheel-load is applied to the center of the wheel.

首先，用热流边界条件模拟轮轨接触界面的摩擦热源，考虑轮轨间的非稳态热传导、轮轨自由表面与环境的热对流、热辐射的影响，建立轮轨滚动接触热耦合有限元计算模型，分析计算轮轨滚、滑工况下的摩擦温升；其次，以求得的轮轨温度场结果作为求解轮轨应力场的已知条件，轮载以集中力形式直接加载于轮心处，将摩擦温升引起的热载荷等效为假想体力和热边界面力，施加于相应的单元节点上，建立了轮轨热—机械载荷耦合作用的热弹性平面应力模型，分析热—机械载荷作用下的轮轨应力场。

The discrete heat and moisture transfer equation and control conditions are obtained with finite volume method. The temperature and moisture distribution and transient heat and moisture absorbing and desorbing of porous envelop are calculated with numerical method. The program for porous envelop heat and moisture transfer are developed by use of FORTRAN. The heat and moisture transfer model is verified using the examples given out in the reference [41] and testing data of funk hole located in A zone Chongqing university.

采用有限体积法对多孔材料热湿传递方程及控制条件进行离散，用数值方法求解多孔围护结构温湿度分布和壁面的瞬时热湿吸放量，采用FORTRAN语言编写了围护结构热湿传递计算程序，并用文献[41]给出的算例和重庆大学A区防空洞的测试数据对模型进行了验证。

A numerical study of the heat and mass transfer process of the solution absorption and the moving out of absorption heat through heat pipe in heat pipe-type falling film absorber are presented.

对第二类吸收热泵热管式降膜吸收器溶液降膜吸收传热传质并通过热管移出吸收热的过程进行了数值研究。

The absorber and evaporator are located at the heat demand side while the generator and condenser at the heat supply side, and the absorption heat in the absorber is supplied to heat consumers.

该系统利用吸收式热泵原理，以氨水为工作流体，发生器和冷凝器布置在热源端，而吸收器和蒸发器布置在热用户端，利用吸收器中溶液吸收蒸气所放出的吸收热来提供热能。

Qingdao°·French°·company to introduce a complete set of production technology and management experience, specializing in the kinds of non-standard heat pipe radiator (IGBT, GTO, diode, thyristor, optical devices, such as heating power devices used), water cooling plate, heat pipe heat exchanger (for closed, air / air), and the molten metal heat insulation direct immersion heater used for research and development and production.

青岛阿特姆全面引进法国阿特姆公司的全套生产技术和管理经验，专业从事各种非标热管散热器（IGBT、GTO、二极管、晶闸管、光学器件等发热功率器件用）、水冷却板、热管换热器（适用封闭箱体内，空气/空气）、以及熔融金属加热保温用直接浸入式加热器的研究和开发生产。

The oil-quenching tank uses the steel plate structure, has the square shape, the rectangle, the circular, in the fuel tank the installment has the electric heating tube, outside the trough the installment has the oil pump, the stainless steel disc heat interchanger, the automatic oil constant temperaturecontrols the warm cabinet, its principle of work: When the work piece enters fuel tank quenching to cause frequently the oil temperature elevates, the oil pump starts to work, sucks in the stainless steel disc heat interchanger fuel tank's in high temperature oil, this time cools the circulating waterto put through automatically, carries on the heat transfer through disc heat interchanger's multi-layer stainless steel plate trough, causes the quenching oil which the process cools to return to the oil-quenching tank again, so moves back and forth the circulation, achieves the fuel tank to decreasetemperature the goal.

淬火油槽采用钢板结构，有方形、长方形、圆形，油槽内安装有电加热管，槽外安装有抽油泵、不锈钢板式换热器，自动油恒温控温柜，其工作原理：当工件频繁进入油槽淬火引起油温升高时，油泵开始工作，将油槽内的高温油抽入不锈钢板式换热器，此时冷却循环水自动接通，通过板式换热器的多层不锈钢板槽进行换热，使经过冷却的淬火油再返回淬火油槽，如此往复循环，达到油槽降温目的。

The quenching oil trough uses the steel plate structure, has the square shape, the rectangle, the rotundity, the electric heating tube installed in the fuel trough , the oil pump and stainless steel disc heat interchanger installed outside of the trough, the automatic oil constant and controlling temperaturetank, its principle of work: When the work piece enters fuel trough quenching to cause frequently the oil temperature elevates, the oil pump starts to work, sucks in the stainless steel disc heat interchanger fuel tank's in high temperature oil, this time cools the circulating water to put through automatically,carries on the heat transfer through disc heat interchanger's multi-layer stainless steel plate trough, causes the quenching oil which the process cools to return to the oil-quenching tank again, so moves back and forth the circulation, achieves the fuel tank to decrease temperature the goal. When the

淬火油槽采用钢板结构，有方形、长方形、圆形，油槽内安装有电加热管，槽外安装有抽油泵、不锈钢板式换热器，自动油恒温控温柜，其工作原理：当工件频繁进入油槽淬火引起油温升高时，油泵开始工作，将油槽内的高温油抽入不锈钢板式换热器，此时冷却循环水自动接通，通过板式换热器的多层不锈钢板槽进行换热，使经过冷却的淬火油再返回淬火油槽，如此往复循环，达到油槽降温目的。

The oil-quenching tank uses the steel plate structure, has the square shape, the rectangle, the circular, in the fuel tank the installment has the electric heating tube, outside the trough the installment has the oil pump, the stainless steel disc heat interchanger, the automatic oil constant temperature controls the warm cabinet, its principle of work: When the work piece enters fuel tank quenching to cause frequently the oil temperature elevates, the oil pump starts to work, sucks in the stainless steel disc heat interchanger fuel tank's in high temperature oil, this time cools the circulating water to put through automatically, carries on the heat transfer through disc heat interchanger's multi-layer stainless steel plate trough, causes the quenching oil which the process cools to return to the oil-quenching tank again, so moves back and forth the circulation, achieves the fuel tank to decrease temperature the goal.

淬火油槽采用钢板结构，有方形、长方形、圆形，油槽内安装有电加热管，槽外安装有抽油泵、不锈钢板式换热器，自动油恒温控温柜，其工作原理：当工件频繁进入油槽淬火引起油温升高时，油泵开始工作，将油槽内的高温油抽入不锈钢板式换热器，此时冷却循环水自动接通，通过板式换热器的多层不锈钢板槽进行换热，使经过冷却的淬火油再返回淬火油槽，如此往复循环，达到油槽降温目的。

Our country firstly put forward such design principle of Qinghai-Tibet railway engineering as "lower temperature actively, reduce the heat into the subsoil, and assure the heat stability of frozen earth for the quality stability of construction", creatively adopt such corresponding measures of frozen earth construction problem as: for the poor frozen earth developing section, line should avoid as possible;for the geology of ice at high temperature and unstable frozen earth zone, the method of bridge instead of subgrade shall be adopted;in subgradeconstruction, such facilities as heat stick, rubble ventilation subgrade , rubble ventilation berm, ventilation pipe subgrade and laying heat preservation board etc shall be adopted to raise the stability of frozen earth subgrade;during the excavation of bridge, culvert , foundation pit and scouring prevention trough, creatively adopt single-tooth knapper and solve the problem of frozen earth excavation;during the construction of bridge and culvert, durable concrete and three-step maintenance method are adopted to assure the outside and inside beauty of structure.

我国在世界上首次提出"主动降温、减少传入地基土的热量、保证多年冻土的热稳定性，从而保证修筑在上面的工程质量的稳定性"的青藏铁路工程设计原则，创造性地采取了解决冻土施工难题的相应对策：对于不良冻土现象发育地段、线路尽量绕避；对于高温极不稳定冻土区的高含冰量地质，采取"以桥代路"的办法；在路基施工中采用了热棒、片石通风路基、片石通风护道、通风管路基、铺设保温板等多项设施，提高冻土路基的稳定性；在桥涵基坑、挡水埝基槽开挖中，创造性地应用了单齿破碎器，解决了冻土开挖难题；在桥涵工程施工中，采用了耐久性混凝土，采用了三步养生法，保证了结构物内实外美。

The effects of variable properties on flow and heat transfer were also studied. 1. SIMPLEC algorithm was used to simulate the laminar natural convection flow in horizontal concentric annuli with the assumption of constant properties. Numerical studies range are as follows: Ra〓 number 100～10〓, radius ratio 1. 2～10.Velocity and temperature distribution profile and the heat transfer result were derived. The comparison of heat transfer results under the boundary condition of constant heat flux and constant wall temperature was also made.

对水平同心套管内层流自然对流采用SIMPLEC算法进行了数值模拟，在〓，半径比1.2～10范围内使用定物性假设进行了计算，得到有关温度和速度的分布以及相应的换热结果，并比较了内壁面分别处于定热流和定壁温条件下换热结果的差异，根据换热计算的结果整理并拟合有关的换热关联式。

Some of them were ligated to the plasmid vector pCR 2.1 andsequenced,respectively.

将所获DNA片段克隆到pCR2.1载体进行测序，并与基因组数据库进行同源性比较。

Thinking since Google owns Blogger, I would be able to escalate this issue to the support team.

自谷歌的思考拥有Blogger的，我将能够缓解这一问题的支持团队。