查询词典 fixed assets

The ingredients defining the propellant are transformed adiabatically and irreversibly to reactions product constituents in the amounts fixed by equilibrium relations, chamber pressure, and mass balance at a reaction temperature fixed by the available energy of reaction.

成分确定推进剂转化adiabatically和不可逆转的反应，产品在功能组别的金额由平衡关系，商会的压力，和质量平衡，在反应温度固定由现有的能源反应。

QS3NB-500Single Pump Group makes use of structure of register,that is to say,diesed and the redveing speed system fixed on a base.The pump is alone fixed another base.The whole device realizes steel function reconneition by shell and dowel,which is vonvenient to take aport and transport.

QS3NB-500单机泵组采用了分体式挂装结构，即柴油机及减速系统安装在一个底座上，泵单独装在另一个底座上，整个装置通过炮弹销子实现钢性连接，便于拆装，运输方便，是油田钻井、修井和多井注水的首选产品。

The model of fixed unit price main contract in com- bination with fixed total price subcontract was adopted.

采用了固定单价主合同与固定总价分合同相结合的模式。

The harm that the author proved fixed price and enterprise with under cost the price sells a product, offer the economics reason of the service, gave out the content that regulation of emulative property price controls is not fixed what correct a manufacturer to apply market strength to undertake the price is caused plunder the gender fixes a price or cahoot however with control price is inefficient the policy proposal that this is full of real significance.

作者论证了固定价格的危害及企业以低于成本的的价格销售产品，提供服务的经济学理由，并给出了竞争性产业价格规制的内容不是固定和控制价格而是纠正厂商运用市场力量进行掠夺性定价或合谋定价引起的低效率这一富有现实意义的政策建议。

The paper deals with the experimental and theoretic study on the influence of the effect of maldistribution on adsorption process in an industrial scale fixed bed,the result shows that as the result of the effect of maldistribution the adsorption capacitate of the fixed bed is decreased.

以甲苯气体为例，研究低浓度有机污染物在活性炭固定床吸附器内受边流效应影响的吸附过程。

Methods From Sep 1999 to Jan 2004, 81 cases of clavicular fracture were treated with opened reduction and internal fixation, of which 36 were fixed with pin ,30 cases were fixed with plate, and 15 were treated with memory alloy embracing plate.

自1999年9月至2004年1月以切开复位内固定的方法治疗锁骨骨折81例，其中30例为钢板内固定，36例为钢针内固定，15例为形状记忆合金环抱式接骨板内固定，术后随诊分析。

As on the west the company of an operation of ancestral temple will do, also be a low ebb period, also be the business of a main stream that seeks oneself, it is under this kind of big environment, got a few limitation, these restrict the company besides us besides, it is in respect of national policy limitation, a few styles with original ancestral temple are mixed on the west fixed position, we do not make an arrangement, the fixed position 10 years ago, its forum character will do, now more if locating is this locality, the netizen is participated in, we center our circumjacent crowd and life incident expression comes out so one kind is formed, this is a very big change, coinstantaneous word, we are in 3 years when, ancestral temple undertakes a few commercialized exploration on the west, commercialized exploration, also be to appear on the market a few demand of the company, if such seeing, to the development of ancestral temple had a negative development on the west.

作为西祠的一个运营的公司来做的，也是一个低潮期，也是寻找自己的一个主流的业务，在这种大的环境之下，受到了一些限制，这些限制除了我们的公司之外，在国家政策限制方面之内，西祠原有的一些风格和定位，我们不做一个安排，十年前的定位，它的论坛性质来做的，现在更加定位的是本地的话，网友参与，我们把自己周边的人群和生活事件集中表现出来这么一种形成，这是很大的一个变化，同时的话，我们在03年的时候，西祠进行一些商业化的探索，商业化的探索，也是上市公司的一些需求，这样的看的话，给西祠的发展起到了一个负面的发展。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

The precision lapping technology to machine the copper substrate using semi-fixed abrasive plate was studied. The surface roughness and material removal rate as the evaluation of indicators, the influences of the different lapping parameters on the surface roughness and material removal rate were discussed and analyzed. Experimental results indicated that the copper substrate could be efficiently machined by semi-fixed abrasive plate of 800(superscript #) SiC abrasive, and the initial roughness Ra of a machined surface could be improved from 0.553μm to 0.28μm in 10min, produced an ideal rarely scratch surface. Then processed copper polished by diamonded grinding paste, it could be satisfied for the Ni-Pd-P alloy thin film growth.

主要研究半固着磨具精密研磨非晶态Ni-Pd-P合金薄膜铜片衬底，以铜片衬底的表面粗糙度和材料去除率为评价指标，探讨了研磨过程中不同的工艺参数对铜片表面粗糙度和材料去除率的影响结果表明：用800 SiC半固着磨具对铜片衬底进行研磨加工，10min后铜片表面粗糙度Ra可由0553μm减小到0.28μm，同时表面无深划痕：加工后的铜片再经金刚石研磨膏抛光可快速获得满足Ni-Pd-P合金薄膜生长用的铜片衬底表面。

You can snipe the second and third union leaders from this position.

您可以鹬第二和第三工会领袖从这一立场出发。

Aiming at the currently shortage of XML streams quality detecting, this paper proposes a new forecasting method of XML streams quality by least squares support vector machines, which is used the method of XML keys' vector matrix as windows, and vector product wavelet transform to multilevel decompose and refactor the XML streams series, that can fulfill real-time checking demand of XML quality, and ensure constraint, consist- ency and integrality. For even more adapting net load, it proposes a control strategy by weight and adaptive adjustment to ensure XML streams quality.

针对当前XML数据流质量检测存在的不足，提出构建XML键的矢量矩阵作为窗口，利用矢量积小波变换多级分解与重构XML数据流，再结合最小二乘支持向量机对XML数据流质量进行预测的一种方法，满足XML数据流质量重构时实时检测的要求，保证XML数据的约束性、一致性与完整性；为了更好的适应网络负载，采取加权与自适应窗口调整等调度策略充分保证XML数据流的质量检测。