查询词典 finite element method

In chapter 2,all kinds of numerical methods of computational fracturemechanics are summarized,the development histories and present situation ofboundary collocation method,boundary integral method,finite difference method,boundary element method and finite element method are expounded,and theapplication of finite element method in fracture mechanics are emphaticallydiscussed.

第二章 总结了计算断裂力学中各种数值方法，论述了边界配位法、边界积分法、有限差分法、边界元法及有限元法的发展历史和现状，并着重讨论了有限元法在断裂力学中的应用。

The coordinate transformation and numerical integration was executed on the discretized tetrahedral elements based on which the 3-D MT vector-finite element method was implemented. A whole computation framework for 3-D vector-finite element method with unstructured mesh was given. Based on this some typical models were tested which has demonstrated that our algorithm could distinctively avoid problems caused by the fake solution and both the accuracy and efficiency were enhanced which made our algorithm has a bright future for further application.3. According to theory of Sobolev vector space and the discretization of Helmholtz space, the error estimate which was suitable for 3-D MT vector-finite element modeling was deduced by which the procedure of adaptive technique was guaranteed.4. Based on the fully unstructured tetrahedralization and optical strategy, the 3-D magnetotelluric h-adaptive vector-finite element method was presented through combining the error estimate. With this work, the accuracy and creditableness for 3-D MT complicatedly modeling was guaranteed.5. The 3-D magnetotelluric h-adaptive vector-finite element algorithm with unstructured mesh was implemented.

针对非结构化的四面体单元，采用坐标变换和数值积分方法，实现了MT三维矢量有限单元分析，建立起基于非结构化网格的三维MT矢量有限元计算流程，并对典型模型和国际标准电磁模型进行了数值模拟，结果对比和分析表明，基于非结构化网格的三维MT矢量有限元不仅消除了节点型有限元的伪解，而且具有很高的计算精度和速度，有广阔的应用前景。3、根据Sobolev函数的向量空间和Hemlholtz空间的分解，推导出基于残差的三维大地电磁矢量有限元后验误差估计公式，为三维大地电磁自适应矢量有限元数值模拟的实现奠定了基础。4、在完全非结构化四面体单元剖分及优化基础上，结合三维大地电磁矢量有限元后验误差估计公式，提出了基于非结构化网格的三维大地电磁h-型自适应矢量有限元计算策略，保证了对复杂大地电磁模型数值计算的精度和可靠性。5、实现了基于非结构化网格的三维大地电磁h-型自适应矢量有限元计算流程，对典型模型和国际标准电磁模型进行了数值模拟。

The Finite Element Method is used to implement the numerical simulation on the model, and the rule of temperature distribution and the relations between screw deformation and temperature are obtained.

应用有限元法(Finite Element Method， FEM)对该模型进行数值模拟，得到滚珠丝杠传动过程中的温度场的分布规律以及温度对丝杠变形的影响关系。

In this paper, a code TFEM-2D (Triangular Partition, Finite Element Method Two-dimensional Problem) for the few-group, two-dimensional, geometrical neutron ...

本文在FELIX C－512计算机上用FORTRAN Ⅳ语言编制了在、几何下的二维少群中子扩散程序TFEM－2D（Trianglular Partition； Finite Element Method Two－dimensional Problem）。

With an example, the paper uses finite element program ANSYS to establish three calculating model of the steel-concrete composite open-web floor: the combination finite element method of spatial beam elements and shell elements, the finite element method of shell elements and the combination finite element method of shell elements and entity element.

结合一算例，利用ANSYS有限元软件，建立了组合空腹楼盖的三种计算模型：空间梁单元与壳单元的混合元模型、空间壳单元模型、壳单元和块体单元模型三种理论计算方法，对这三种计算模型作分析对比，得到了静荷载作用下该类结构的内力分布规律及其他一些有价值的结论。

Supposed stochastic variations are perturbed in a small range, we can get a nonlinear equation of these stochastic variations by using a Taylor series or a Neumann series expansion of the system matrix. The application of perturbation techniques translates this nonlinear equation into a pair of constant linear recursive equations. Then we have written a paper "Stochastic Finite Element Method for Interconnect Including Variational Analysis" which has been contributed to 11th Asia and South Pacific Design Automation Conference.

本文所取得的主要成果就是提出了一种新的算法，即用随机有限元来分析变化的互连线，将方程按随机变量泰勒展开或者纽曼展开，从而化无限维为有限维；应用matlab进行了算法仿真，并将结果与传统Monte-Carlo与GETA进行了比较；最后写了一篇文章《Stochastic Finite Element Method for Interconnect Including Variational Analysis》，已投第11届亚洲和南太平洋设计自动化会议。

In this paper, the space-time finite element theory and its application technologies are studied and discussed. Furthermore the space-time finite element method is used to analyze the transient characteristics of electromagnetism equipments. The work is important to develop the numerical method for the transient electromagnetic field. The detailed work is as follow.In the basis theory of finite element method used in the transient engineering problem, the functional theory and the finite element theory are applied to studied the existence condition of a generalized variation principle, which is the basis of the space-time finite element method.

本文在完善时空有限元法的基础理论和应用技术并将该方法应用于解决电磁装置的瞬态过程分析等相关方面进行了深入的研究与探讨，该工作对于发展瞬变电磁场问题的数值计算方法具有重要的意义，为此进行了如下几方面的工作：在工程瞬变问题的有限元方法的基础理论方面，本文应用泛函理论和有限元理论，系统讨论了一般工程瞬变问题的变分定理的存在条件及对应的变分定理。

After take analyzed deeply for the opened magnet circuit with FEMM (Finite Element Method Magnetics) we find out the field distributing that is separated into three sections . One is the main area what we called as positive field section. Beside the main field there are tow areas that are called the inverted field sections. Loudspeaker arise a very serious distortion when the voice coil moving into inverted field areas. The direction of induced current in the coil part of entered inverted field area is same with the current driving into loudspeaker so that total currents increas largely and heat increase rapidly. With more coils moving into inverted area the voice coil will take on negative inductance properties. It is the main reason that voice coil is burned by heating with increasing current due to arise negative inductance. So opened magnetic circuit is not suitable for the woofers in which the voice coil have wider displacement range. When using this kind magnetic circuit design, the voice coil moving range should be less than the range of positive field to avoid loudspeaker arise serious distortion and heating. Even though voice coil moving range is in the positive area, loudspeaker will still arise more distortion because the field distribution is very cliffy at tow sides of the positive area and full range of magnetic field distribution is not parallel that will arise distortion. Base on above reasons, opened magnetic circuit is not an ideal magnetic circuit for low-frequency loudspeakers. But it can be used in mid-range or high-frequency productions.

开式磁路是由2片钕铁硼磁铁和主导磁板和导磁垫片组成，我们在实践过程中发现这种磁路结构不适合于低频扬声器的使用，我们通过使用FEMM（Finite Element Method Magnetics）软件包对该磁路进行了分析，该磁路的磁场范围被分成3个区域，其中在主导磁板附近形成一个正向磁场，在正向磁场的两边存在反向的磁场，音圈在工作时有很大一部分进入了反向磁场中，在反向磁场内线圈的感应电流方向与驱动电流方向相同，使得音圈呈现出负感抗特性，由于音圈的负感抗特性引起电流的增加导致音圈发热甚至烧毁，因此在扬声器中使用开式磁路时，音圈的运动范围应控制在正向磁场范围之内，否则音圈运动到反向磁场区域时将会产生很大的失真和发热，即使在设计时已经将音圈的运动范围控制在正向磁场范围之内，由于正向磁场的2个边缘磁场强度衰减太快，同时开式磁路中磁场的分布不是平行的，而是自由发散的分布，这样肯定会导致扬声器的非线性失真，因此我们得到的结论是：开式磁路并不是一个理想的磁路，它不适合于低频扬声器的使用，但它还可以应用于中高频扬声器。

The opened magnetic circuit is composed as tow NdFeB permanent magnets and a top plate without U-yoke. After take analyzed deeply for the opened magnet circuit with FEMM (Finite Element Method Magnetics) we find out the field distributing that is separated into three sections . One is the main area what we called as positive field section. Beside the main field there are tow areas that are called the inverted field sections. Loudspeaker arise a very serious distortion when the voice coil moving into inverted field areas. The direction of induced current in the coil part of entered inverted field area is same with the current driving into loudspeaker so that total currents increas largely and heat increase rapidly. With more coils moving into inverted area the voice coil will take on negative inductance properties. It is the main reason that voice coil is burned by heating with increasing current due to arise negative inductance. So opened magnetic circuit is not suitable for the woofers in which the voice coil have wider displacement range. When using this kind magnetic circuit design, the voice coil moving range should be less than the range of positive field to avoid loudspeaker arise serious distortion and heating. Even though voice coil moving range is in the positive area, loudspeaker will still arise more distortion because the field distribution is very cliffy at tow sides of the positive area and full range of magnetic field distribution is not parallel that will arise distortion. Base on above reasons, opened magnetic circuit is not an ideal magnetic circuit for low-frequency loudspeakers. But it can be used in mid-range or high-frequency productions.

开式磁路是由2片钕铁硼磁铁和主导磁板和导磁垫片组成，我们在实践过程中发现这种磁路结构不适合于低频扬声器的使用，我们通过使用FEMM（Finite Element Method Magnetics）软件包对该磁路进行了分析，该磁路的磁场范围被分成3个区域，其中在主导磁板附近形成一个正向磁场，在正向磁场的两边存在反向的磁场，音圈在工作时有很大一部分进入了反向磁场中，在反向磁场内线圈的感应电流方向与驱动电流方向相同，使得音圈呈现出负感抗特性，由于音圈的负感抗特性引起电流的增加导致音圈发热甚至烧毁，因此在扬声器中使用开式磁路时，音圈的运动范围应控制在正向磁场范围之内，否则音圈运动到反向磁场区域时将会产生很大的失真和发热，即使在设计时已经将音圈的运动范围控制在正向磁场范围之内，由于正向磁场的2个边缘磁场强度衰减太快，同时开式磁路中磁场的分布不是平行的，而是自由发散的分布，这样肯定会导致扬声器的非线性失真，因此我们得到的结论是：开式磁路并不是一个理想的磁路，它不适合于低频扬声器的使用，但它还可以应用于中高频扬声器。

For some rock slopes, which have not distinct failure surface, but have complicated structure or load on the top and so on, a stability analysis of this type slopes by finite element method is presented, the failure surface is defined by certain rule or strain zone from the computed model, and then the safety factor of the rock slope is abtained by finite element method and limit equilibrium methodAt last, using ANSYS , a famous commercial finite element analysis software, a example of high-steep slope which is bearing the load of the LongGe Mansion is presented, the stability of this slope is studied, as a paradign the the stability evalution of complicated high-steep slope under the action of load of building , the chapter gives some meritable reference in stability assessment of rock slopes using numerical simulation by three-dimension elastic-plastic finite element.

并用有限单元法建立边坡的具体模型，应用折减边坡岩体参数、逐级施加荷载等与边坡工作环境相似的方法进行模拟计算，根据计算结果，采用一定的判别准则或图形可视化方法，确定出边坡的滑裂面，再采用刚体极限平衡法或有限单元法计算其安全系数；最后，通过某一工程实例，用大型有限元程序对边坡在建筑物荷载作用下的稳定性进行分析研究，并以此作为计算分析复杂高边坡在高层建筑物作用下的稳定性评价的一个范例，在采用有限元弹塑性数值模拟岩质边坡稳定性方面提供一些有价值的参考。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。