查询词典 film-fan

M^(-2). The polarization curves show that the corrosion current density of sol sealed film is about 2 orders of magnitude lower than that of the film sealed by sodium bichromate, the reason is that sol particles can not only seal pores of anodized film, but also form sot-gel coating on anodized film.

m^(-2)。极化曲线显示溶胶封闭膜的腐蚀电流密度比重铬酸盐封闭膜的降低2个数量级，其原因是溶胶不仅封闭了氧化膜的孔隙，而且在氧化膜的表面形成溶胶凝胶涂层。

The polarization curves show that the corrosion current density of sol sealed film is about 2 orders of magnitude lower than that of the film sealed by sodium bichromate, the reason is that sol particles can not only seal pores of anodized film, but also form sol-gel coating on anodized film.

极化曲线显示溶胶封闭膜的腐蚀电流密度比重铬酸盐封闭膜的降低2个数量级，其原因是溶胶不仅封闭了氧化膜的孔隙，而且在氧化膜的表面形成溶胶凝胶涂层。

At constant viscosity, by increasing the liquid flow rate, the liquid film's velocity is increased; at the same experiment condition, the frequency of the liquid film is same at the same radial direction; the air current has minimum effect on liquid film bottom flow velocity, while it has an obvious effect on liquid film surface flow velocity. The longer the distance between liquid film and the inlet, the lower the pulsatory frequency and longer the wavelength.

在粘度基本不变的情况下，随着液体质量流率的增加，液膜流动速度随之增加；在同一个实验条件下，沿圆管径向各质点的频率基本保持不变；气流场速度对液膜底层流动速度影响很小，对于液膜表面流动速度有着较大的影响；沿液膜流动方向，液膜的脉动速度逐渐增加，脉动频率降低，脉动波长变长，与报道的通过快速摄像得到的液膜发展趋势一致，证实用PDA研究液膜流动是可行的。

For thin polycrystalline films, especially those with columnar structure, once the diameter of grains on the film surface is larger than the film thickness, the total area of above and under basal planes (film-substrate interface) will be larger than that of side plane. And if the film precipitates on the substrate with thermal expansion coefficient different from that of the film, great thermal stress will be introduced during annealing.

对于薄膜特别是柱状晶薄膜，当晶粒在膜平面内的尺寸大于膜厚时，柱状晶粒的上底面和下底面的面积将大于侧面的面积，如果薄膜还附着在与其热胀系数不同的基体上并在不同于沉积温度的条件下退火时，膜中将存在较大的热应力。

Sensing ability of PSS/PANI self-assembled film with different doping/dedoping structure to DMMP and CEES was investigated. Results demonstrate that the gas sensitivity of PSS/PANI self-assembled film is affected by the size of dopant counterions. Gas sensitivity of self-assembled film increases with increasing size of dopant counterions. It is found that sensing ability of PSS/PANI self-assembled film to DMMP increases significantly by redoping/dedoping EB-PSS/PANI film with sarin acid that has similar structure with DMMP.

首次考察了不同掺杂/脱掺杂结构的PSS/PANI自组装膜对化学战剂模拟剂DMMP和CEES的敏感性能，研究表明，掺杂酸对离子的尺寸大小对PSS/PANI自组装膜的气敏性有很大影响，较大的对离子尺寸有利于提高自组装膜的气敏性；并且发现采用与DMMP结构类似的沙林酸对EB-PSS/PANI自组装膜进行再掺杂-脱掺杂，能显著提高PSS/PANI自组装膜对DMMP的敏感性能。

Fuzhou-Czech Plastic Machinery Co., Ltd. is the domestic production of plastic machinery manufacturers one of the professional, the company has a group of the original plastic machinery plant in Fujian Province rich practical experience in the production of skilled workers and advanced technology and equipment; main production of plastic extrusion machines, plastic injection molding Machines, plastic heat shrinkable film machines, plastic pipe extruder, plastic sealing machine, plastic profile extruder, plastic blown film machines, plastic cushions film extruders, plastic wire drawing machine, plastic granulator, plastic recycling granulation Machines, beverages suction machine, plastic film-torn and broken plastic machine, mixer, cable wire extrusion unit, packaged with units, and other auxiliary and supporting various extrusion dies (Blown Film nose, drawing the nose, pipe Die expansion, the porous Die, Die Profile, etc.).

福州通捷塑料机械有限公司是国内生产塑料机械的专业厂家之一，公司拥有一批原福建省塑料机械厂丰富实践经验的生产技术人员及先进的技术装备；主要生产塑料挤出机、塑料注塑机、塑料热收缩膜机、塑料管材挤出机、塑料封口机、塑料异型材挤出机、塑料吹膜机、塑料气垫膜挤出机、塑料拉丝机、塑料造粒机、塑料回收造粒机、饮料吸管机、塑料撕裂膜机以及塑料破碎机、混合机、电缆电线挤出机组、打包带机组、等配套辅机和各种挤出模具（吹膜机头、拉丝机头、管材扩口模、多孔管模具、异型材模具等）。

Usually he is satisfied with films, but today, after yet another contest at the Petrozavodsk Training Camp, he has watched a film narrating the hard lot of narfs, scrunts, and tartutics. Denis didn't like the film at all. Now he wants to lower the rating of this film at the Web site, so that other film fans won't go to a cinema to watch such a dreadful film.

通常，他会对这些电影很满意但是今天，在 Petrozavodsk的另一场比赛后他看了一场电影描述narfs， scrunts， and tartutics Denis根本不喜欢这部电影，现在他想让这个电影在他网站上的评价变低，这样就不会有其他的影迷来看这部无聊的电影了。

The main products are: HDPE blown film machines, color of the composite blown film machine, and preservation of paper blown film, PP blown film machine, cutting machine closures, machine-closure, points off machines, package vest-pocket, eagerly vest Bag machines, folding machines film and correct for machines.

主要产品有：HDPE吹膜机、彩条复合吹膜机、保鲜纸吹膜机、PP吹膜机、封切机、边封机、点断机、卷装背心袋机、热切背心袋机、折膜机、纠编机等。

Initially, assuming that the contact between cam and tappet is"dry contart", a dynamics model of Hertzin contact stiffness and impact damping is established. Next, with dynamic load on cam—tappet pair from the model, an analysis is made both to unsteady EHD oil film in cam—tappet pair under condition of full and partial lubrtication and to wear characteristics of cam profile. then, according to the fact that the lubrication in cam—tappet contact surface is EHD lubrication, taking the interaction between stiffness and damping of unsteady EHD oil film and rigidity of solid object contact into account, a dynamics equation of valve train relating to the dynamic effect of EHD oil film is built up and solved. Consequently, a further study is made on the dynamic characteristics of valve train under interaction of EHD oil film dynamic behavior and the problem of EHD lubrication in cam—tappet pair. Finally, the dynamic effect of full and partial EHD oil film is studied accordingly.

首先，通过对凸轮—挺杆接触为&干接触&的假设，建立了考虑赫兹&接触刚度&和冲击&阻尼&的配气机构动力学模型，用由此求得的凸轮—挺杆表面动载荷对凸轮—挺杆进行了全膜状态和部分膜状态非稳态弹流润滑分析，并研究了凸轮轮廓的磨损规律；然后，是在凸轮挺杆表面存在弹流动压油膜这一事实的基础上，相当于在动力学方程中考虑非稳态弹流油膜的&刚度&、&阻尼&和固体接触&刚度&的耦合作用，建立并求解了考虑弹流润滑行为动力学效应的配气机构的动力学方程，从而深入地研究了弹流润滑行为与动力学行为耦合作用下的配气机构动力学特征以及凸轮挺杆弹流润滑问题；作为前面工作的对应部分，考虑弹流油膜动力学效应的研究工作也同样分为全膜状态和部分膜状态进行。

The structure of the thin film capacitor 1 of this invention is: form sequentially at least the bottom electrode layer 102, the high dielectrics constant oxide film 103 and the upper electrode layer 105 on the semiconductor substrate 101; said upper electrode layer 105 which is a film layer 104 formed by the electrical conductive material which is processable by reactive ion etching, or a multilayered film composed of two kinds of film layers 107 and 108, which are each formed of a conductive material which is processable by at least two kinds of reactive ion etching.

要约 薄膜电容器1是至少在半导体基片101上按顺序形成下部电极层102、高介电常数氧化物膜层103、上部电极层105而构成的薄膜电容器，该上部电极层105由一种仅由可用反应性离子刻蚀加工的导电性材料形成的膜层104，或至少两种由可用反应性离子刻蚀加工的导电性材料分别形成层状的多层膜层107和108构成；经历350℃的热试验之后，对该薄膜电容器1施加OV到2V的驱动电压的薄膜电容器漏电电流密度为1×10 －8 A/cm 2 以下。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。