查询词典 experimentally

The science of crystal structures and the methods by which they are determined experimentally makes up the subject of "crystallography".

科学的晶体结构和方法进行了实验确定了主题为"重"。

Taking the alkylation of benzene with propylene to form cumene as model reaction, the effect of extrusion condition on zeolite's global performances, such as activity, cumene selectivity, strength and lifetime etc were experimentally investigated.

本文以苯和丙烯烷基化合成异丙苯为模型反应，系统考察了成型条件对β分子筛催化剂宏观性能的影响(包括活性、选择性、强度、寿命和孔结构等)。

A new method was proposed by imposing a rotating electromagnetic field during horizontal continuous casting of thin-walled cupronickel tube billets. The effects of electromagnetic field on the surface quality, solidification structure and mechanical properties were investigated experimentally by use of BFe10-1-1 alloy.

摘 要：为获得高质量的薄壁白铜管坯，提出了在水平连铸过程中施加旋转电磁场的管坯连铸新方法，并采用BFe10-1-1合金进行实验，考察了电磁场对白铜管坯表面质量、凝固组织和力学性能的影响。

The small signal current sensitivity of twisted fibers is analyzed and calculated theoretically, and a new and more convenient method to measure the Verdet constant is proposed and verified experimentally.

从理论上分析、计算了扭转光纤对小信号电流灵敏度的影响，提出了一种新的更为简便的方法测量费尔德常数，并用实验验证。

The main contents are listed as follows: 1. Nine square concrete-filled thin-walled steel tubular columns with stiffeners (six specimens with longitudinal stiffeners in two directions and three specimens with longitudinal stiffeners in one direction) have been experimentally investigated under combined constant axial load and lateral cyclic load in order to get their hysteretic behavior.

具体进行了以下几方面工作：(1)共进行了9根设肋方形薄壁钢管混凝土柱(6根双向设纵向加劲肋、3根单向设纵向加劲肋)在恒定轴力和往复荷载作用下的滞回性能试验研究。

The effect of liquid hydrocarbon (cyclopentane and methylcyclohexane) on methane hydrate formation conditions is studied experimentally.

实验研究了液态烃对甲烷水合物形成条件的影响，测试结果表明液态烃降低了甲烷水合物的形成压力，并改变了形成水合物的结构。

The effect of tribology factors on bearing vibration is studied experimentally. AR model and WPT are used to processing the normal arid abnormal signals. The results are as follows:1. The vibration of ball bearings is caused by the tribology action of contact pairs of ball and ring races and has the essential of tribo-dynamics. Any factors affecting the tribology characteristics of contact pairs will affect vibration and noise of bearings consequently.2. Vibration characteristics of bearing keep almostly unchanged with the increasing of axial load expecting the increasing of nature frequencies. When radial load increasing with axial load unchanged, nature frequencies keep unchanged but some new vibration peaks appears in the spectrum.3. Vibration amplitudes are damped and nature frequency are enhanced with sufficient lubrication. Vibration and noise of bearings increase obviously and roar can happen and the contact surfaces scratch slightly under insufficient and unclean lubrication state. Bearing will be disabled in a few minutes without any lubrication.4. Bearing vibration is unstable under low speed. With the speed increasing, the vibration become stable and natural frequencies increase slightly but the amplitudes increase apparently.5. Bearing vibration can be excited only by some harmonics ofwaviness without lubrication and by all harmonics with lubrication based on the theoretical analysis.6. The nature frequencies of ball bearings decrease with the increasing sizes. When international clearance increasing, nature frequencies decrease in radial and increase in axial and angular and the amplitudes increase in radial and decrease in axial and angular. When the number of balls increasing, nature frequencies increase and amplitudes decrease. When the pitch diameter increasing, axial nature frequency increase and others nearly keep no change. When outer race groove curvature radius increasing, nature frequencies increase in radial and decrease in axial and angular and amplitudes keep no change in radial and increase in axial and angular. When inner race groove curvature radius increasing, nature frequencies decrease and amplitudes increase.7. The distortion in amplitude and frequency components of bearing vibration signals picked up by the present probe measurement method is founded and right conclusions cannot be achieved by the signals. When accelerometer is rigidly screwed with steel stud onto a flat outer surface of a ball bearing, vibration signal can be got without distortion and the reliability of research on bearing vibration is assured.8. AR model is suitable for large samples of bearing vibration signals, square root of length of samples can be used as the upper limitation of order determination and the FPE order selection criterion is effective. Many advantages of AR spectrum are founded over the classical based on FFT.9. Time-Frequency analysis is necessary for abnormal noise of ball bearings. WPT overcomes the principle shortcomings of STFT and proved to be a best tool to process the abnormal signals.

理论分析和试验研究表明： 1球轴承振动是钢球—滚道接触副中的各种摩擦学作用引起的，具有摩擦动力学的本质，任何对接触副的摩擦学特性有影响的因素都将对球轴承的振动和噪声特性产生影响； 2中心轴向载荷作用下，载荷增大使球轴承的固有振动频率升高，载荷越大同样的载荷增幅引起的频率升幅减小，足够大的中心轴向载荷作用下载荷的变化对球轴承振动的频率特性不会产生明显的影响； 3轴向和径向联合载荷作用下，径向载荷不大时球轴承振动的固有频率基本不变，但是可能引起变刚度激励的非线性振动，出现新的频峰，过大的径向载荷将使部分钢球脱离接触，使球轴承的振动和噪声呈现不稳定状态； 4润滑对球轴承的振动和噪声特性有重要的影响，良好的润滑对振动有明显的抑制作用，润滑不充分时，振动和噪声的水平会有明显增高，一定条件下还会激发接触副中的谐振，发出啸声，造成接触表面的伤害，无润滑干接触时，短时的运转就会损伤接触副表面，使振动和噪声迅速增大，并随时可能引发严重的磨损和卡滞失效；接触副润滑良好时，油膜的"刚化效应"使球轴承振动的固有频率有所提高，润滑剂中含有弥散性污浊时，振动的幅度总体升高，但弥散性污浊不会改变球轴承振动的频率特性；浙江大学博士学位论文：球轴承振动的研究 5低速时，球轴承振动的基本特征呈现不稳定状态，随着转速的提高，球轴承振动的频率特性趋于稳定，固有频率频峰升高； 6理论分析表明，干接触时钢球和滚道表面波纹度的某些谐波分量能激励球轴承的振动，振动的幅值与谐波幅值成正比，实际球轴承中钢球的分布不可能完全均匀，波纹度的激励作用会随时发生；润滑接触的分析表明，波纹度的任意谐波分量均能激励球轴承的振动； 7球轴承的几何和结构参数分析表明，球轴承尺寸越大，径向、轴向和角振动的固有频率越低；钢球中心圆直径增大，球轴承的径向和轴向振动的固有频率基本不变，角振动的固有频率有所上升，振动的幅频特性基本不变；径向游隙加大使球轴承的径向振动固有频率降低，轴向和角振动的固有频率有所升高，径向振动幅频特性的幅值升高，而轴向和角向降低；钢球的数量增多使球轴承振动的固有频率上升，幅频特性的幅值下降，径向振动的幅值下降最为明显；外圈沟曲率半径系数增大使球轴承径向振动的固有频率升高，轴向和角振动的固有频率降低，径向幅频特性基本不变，轴向和角向幅频特性幅值升高；内圈沟曲率半径系数增大使径向、轴向和角振动固有频率均下降，振动幅频特性的幅值均有升高； 8试验对比表明，传感器采用探针式安装时，由于探针接触副接触特性的影响，钡(量得到的球轴承振动信号有失真，采用专门设计和制作的试验球轴承，以固定式安装加速度计，首次测量得到了球轴承振动的真实信号，通过对振动信号的分析，验证了球轴承振动的理论模型； 9)基于时间序列分析的AR模型适用于大样本球轴承振动信号的分析，以样本长度的均方根值作定阶上界，FPE做判阶准则，给出的AR谱光滑，频率分辨率高，是球轴承振动分析的简便而可靠的手段； 10以时频域分析的小波包变换分析球轴承异音信号能够比较好地定位和聚焦异音发生的时间，时间间隔，频率范围，同样是球轴承振动分析的可靠的手段，可用作球轴承故障诊断技术。

The mechanisms are chosen based on the experimentally observed dynamic characteristics of the kind dashpot behavior and analyzing the experimental data for the kind dashpot.

用所建模型重构恢复力――位移迟滞环，结果表明，该模型能很好描述这类非线性振动系统的特性，模型中各参数的重要性得到展示，提出的建模方法实用且有效。

An algorithm of Dead Reckoning/Baro-altimeter integrated navigation is presented, and proved experimentally.

给出了一种实用航位推算／高程计组合导航的算法，并进行了实际跑车验证。

The decay of ~(99m)Tc source was used to verify experimentally that in the measurement of the number of atoms of a radioactive isotope in a sample at time t_0, the error introduced through the inaccuracy of its decay constant can be reduced to a much smaller value by the careful selection of the time of measurement or measurements of its radioactivity at around one life time (1/λ) after t_0 and doing the calculation.

本文用~(99m)Tc源的衰变实验证明了：在测量一个样品中在t_0时的一种放射性同位素的原子数时只需精心选择一次或多次测量其放射性的时刻在t_0后约该同位素的一个寿期(1/λ)，并进行计算，则由它的衰变常数或其半衰期(T1/2)的不准确性而引进的误差可以被降低到较小值。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。