查询词典 error analysis

The measurement system error model analysis is introduced into power system real time network state analysis as an important part for the first time, which can improve on the state estimation quality and provide the capability to monitor the operation of the measurement system; 2. The theory and algorithm of the on-line estimation and update of measurement noise variance based on the relation between the residual variance and noise variance. The statistic properties of the sample variance are discussed and the relation between the estimation precision and sample size under given confidence level is derived; 3. The theory and algorithm of detection and identification of measurement bias are presented, which is based on the relation between residual mean and noise mean. The statistic properties of sample mean are discussed and the relation between estimation precision and sample size is derived; 4. The Givens orthogonal transformation algorithm is selected to be the essential algorithm of state estimation, the fast orthogonal transformation algorithm with damp factor and the algorithm which can handle the zero injection measurements efficiently are presented; 5. The quantity analysis theory of bad data detectivity and identifibility are presented, which describes the relation between the elements in matrix W〓 and bad data amplitude and can provide the theory base for measurement system design and valuation.

一、首次将量测系统误差模型分析做为一个环节引入电力系统实时网络状态分析中，为EMS系统增加了实时监视系统运行、修正量测系统误差模型的新功能，进一步发挥了实时网络状态分析应用软件的潜力；二、首次提出了应用样本方差在线估计与修正量测系统误差方差的基本理论，讨论了样本方差的统计性质和概率分布，推导出了样本容量、估计精度和置信度之间的关系，给出了在线估计与修正量测系统误差方差的算法；三、首次提出了应用样本均值在线检测与辨识量测偏差的基本理论，讨论了样本均值的统计性质，推导了样本容量、估计精度和置信度之间的基本关系，给出了在线检测与辨识量测偏差的算法；四、在状态估计算法设计中，以Givens变换算法做为基本算法，提出了快速正交变换阻尼因子法和可以有效地处理零注入量测的混合法，并对实时应用中的一些问题进行了讨论；五、提出了不良数据可检测性与可辨识性的定量分析理论，揭示了描述量测系统配置、网络结构与参数的残差灵敏度矩阵中的元素与不良数据的幅值在可检测、可辨识能力上的定量关系，为量测系统配置设计与评价提供了理论基础；六、综合国内外最新研究成果，采用自适应自回归预测技术和稀疏矢量技术，构造了较完善的不良数据检测与辨识算法。

The undercutting analysis probe the position of undercutting line and the spherical angle of spherical gears. Teeth contact analysis probe the kinematic error and the position of contact point of spherical gears with misalignment and ideal case. Another contact pattern analysis probe the positions and size of contact pattern ofspherical gears.

齿面过切分析主要探讨球形齿轮之齿面过切位置及过切发生的球形角，接触分析则讨论球形齿轮分别在具有装配误差及理想状况时之运动误差及接触点位置，另外，齿印分析探讨球形齿轮在受力变形后其接触椭圆之位置及大小。

Then a mixed-programmed method based on MATLAB and VB was introduced to simulate the shafting error model, and the error model was proved by comparing the simulating and calculating result with the spherical trigonometry method, which provides reference for precision analysis and error correction.

采用MATLAB与VB混合编程的方法对该误差模型进行了仿真分析，通过比较仿真结果与单项误差法计算的结果，验证了该轴系误差模型的正确性，为光电经纬仪的精度分析和误差修正提供了参考。

As the existence of qualitative calculation error and statistical error, we have to use the qualitative analysis to examine the scientific nature and effectiveness of the work, making sure to reduce the error of qualitative calculation.

由于在定量计算中系统误差和统计误差的存在，为此在定量分析之后，都有相关定性分析加以分析和解验，以求研究工作的科学性和有效性。

Aiming at researching on the theory of the shaft-kind parts form error evaluation and its application, on the basis of the analysis for the geometric model of the roundness error and cylindricity error, the linear programming models of the enclosure evaluation were proposed. According to the features of the proposed models, the solution of the optimization algorithms of linear planning was discussed to obtain accurate evaluation results.

为了对轴类零件形状误差评定理论及应用进行研究，在分析轴类零件的圆度、圆柱度误差评定几何模型的基础上，建立了包容拟合评定的规划数学模型，并针对模型的特点，探讨了使用线形规划的单纯形优化算法进行规划模型的求解，从而获得精确的形状误差评定结果。

As the result of theoretical analysis and practical test, the systematic error corrections of the second-order level measurement must include collimation error correction, refraction error correction and orthometric correction (altitude over more than 50 m in the examining area).

经理论分析与实际测试后发现二等水准测量须做视准轴误差、折射误差与正高改正（测区标高超过50公尺以上），而二等水准测量，则须加人视准轴误差，测区标高超过100公尺以上，亦需加人正高改正。

The meshing of FG drives with misalignment, which includes shaft angle error, shaft crossing error and axial shift error, is analyzed by using the continuous tangency of pinion and FG to obtain the equations of tooth contact analysis, and visualizing contact path, and studying the effect of errors on the shift of it. A computational procedure of tooth contact is developed in this paper.

在具有安装误差的面齿轮传动的啮合分析中，建立了在有轴交角误差、轴交错误差和轴向偏移误差情况下的齿面接触轨迹所满足的方程，提出了一种求解接触点参数的策略；对齿面接触轨迹进行了可视化；分析了各类误差对齿在接触轨迹的影响。

Moreover, the accuracy analysis for different measurements and parameters(such as time measure error, azimuth measure error, buoys error, baseline length and sound velocity fluctuation) are given respectively. To make the best use of the observation datas, the weighted least square localization algorithm is used to improve the accuracy in bistatic sonar. The simulation results show that the positioning accuracy of this algorithm is higher than the other four algorithms, with which the positioning accuracy in stations areas and side areas can be improved effectively.

同时，通过对系统各个因素，如系统的各观测量的测量误差、站址误差、基线长度、声速波动等参数对算法性能的影响，得出了各方法定位误差的分布规律；为了充分利用双基地声纳系统的观测数据，提高系统的定位精度，采用加权最小二乘方法对系统的数据进行优化处理，仿真结果表明该方法定位精度明显高于基本方法的定位精度，能有效的改善发射站和接受站侧边区的定位精度，且定位性能受站址测量误差的影响较小。

From the experiment and analysis, it can be seen that friction limits realization of high accuracy electro-hydraulic position servo system, movement of any gimbal brings disturbance moment to servo system of other gimbals and the disturbance moment causes error, and, resolution ratio error and setting error of feedback measurement element are directly added to servo system output.

通过实验和仿真可以看出，摩擦阻碍了转台电液位置伺服系统商精度控制的实现，任何一个框架的运动都会对其余框架的伺服驱动系统产生干扰力矩并引起伺服系统误差，反馈测量元件的分辨率误差和安装误差直接反映在伺服系统输出上，对伺服系统的精度有直接影响。

Then the error sources of the reaction type and electron type electric energy mete were analyzed and the theory analysis result through the concrete test have been proved. At last, the main conclusion has been drawn. When the induction type electric energy meter measures harmonics energy, the negative error characteristic appears. The higher the frequency of harmonics is, the greater the error is. The electron type electric energy meter can measure harmonics energy accurately in general cases. Except thermo-electrical conversion type electron type power meter, reaction type and electron type electric energy meter can measure direct current power.

本论文通过分析感应式和电子式电能表的工作原理推导出了电能表计量电能的数学模型；分析了感应式和电子式电能表的误差来源以及谐波对计量的影响，并通过具体的试验对理论分析结果进行了验证；得出了如下谐波对电能表计量影响的主要结论：感应式电能表计量谐波电能时，呈现负的误差特性，谐波频率越高，误差越大；电子式电能表在其频响范围内可以准确计量谐波电能。

Plunder melds and run with this jewel!

掠夺melds和运行与此宝石！

My dream is to be a crazy growing tree and extend at the edge between the city and the forest.

此刻，也许正是在通往天国的路上，我体验着这白色的晕旋。