查询词典 equivalent unit

At present, although finite element methods is a kind of effective measures in analyzing metal plastically forming problems with friction, dynamic friction in the process of metal forming is substituted with static friction and constant frictional force as one of independent constraint conditions is transposed to equivalent node-load or FEM unit is divided into contact unit and inner unit in numerous studys and applications, so that it result in relative bad accuracy and awkward operation. These defects mostly attribute to the fact that FEM bases on the variational equality principles, however frictional constraint will actually result in variational inequality energy functional.

目前，应用于分析金属塑性成形的有限元法是一种有效的处理摩擦效应的定量计算方法，但是许多应用和研究是用常摩擦来代替金属塑性成形过程中的动态摩擦；把常摩擦力作为单独的约束条件移置到等效结点载荷上或把有限元单元划分成接触单元和内单元，这些将导致解的精度相对不高及实际操作不方便等一系列问题，产生这些不足的重要原因之一在于它的理论基础是变分等式原理。

Twenty-foot equivalent unit, TEUforty-foot equivalent unit, FEU

一般集装箱都是以TEU为基本单位，也就是20'GP的箱

Container Yard C/收货人 Consignee C/O 产地证 Certificate of Origin CAF 货币汇率附加费 Currency Adjustment Factor CFS 散货仓库 Container Freight Station CFS/CFS 散装交货 CHB 报关行 Customs House Broker CIF 成本,保险加海运费 COST,INSURANCE,FRIGHT CIP 运费、保险费付至目的地 Carriage and Insurance Paid To COMM 商品 Commodity CPT 运费付至目的地 Carriage Paid To CTNR 柜子 Container CY/CY 整柜交货 D/A 承兑交单 Document Against Acceptance D/O 到港通知 Delivery Order D/P 付款交单 Document Against Payment DAF 边境交货 Delivered At Frontier DDC 目的港码头费 Destination Delivery Charge DDP 完税后交货 Delivered Duty Paid DDU 未完税交货 Delivered Duty Unpaid DEQ 目的港码头交货 Delivered Ex Quay DES 目的港船上交货 Delivered Ex Ship Doc#文件号码 Document Number EPS 设备位置附加费 Equipment Position Surcharges Ex 工厂交货 Work/ExFactory F/F 货运代理 Freight Forwarder FAF 燃料附加费 Fuel AdjustmentFactor FAK 各种货品 Freight All Kind FAS 装运港船边交货 Free Alongside Ship FCA 货交承运人 Free Carrier FCL 整柜 Full Container Load Feeder Vessel/Lighter 驳船航次 FEU 40'柜型 Forty-Foot Equivalent Unit 40' FMC 联邦海事委员会 Federal Maritime Commission FOB 船上交货 Free On Board GRI 全面涨价 General RateIncrease H/C 代理费 Handling Charge HBL 子提单 House B/L I/S 内销售 Inside Sales IA 各别调价 Independent Action L/C 信用证 Letter of Credit Land Bridge 陆桥 LCL 拼柜 Less Than Container Load M/T 尺码吨 Measurement Ton MB/L 主提单 Master Bill Of Loading MLB 小陆桥,自一港到另一港口 Minni Land Bridge Mother Vessel 主线船 MTD 多式联运单据 Multimodal Transport Document N/F 通知人 Notify NVOCC 无船承运人 Non Vessel OperatingCommon Carrier O/F 海运费 Ocean Freight OBL 海运提单 OceanB/L OCP 货主自行安排运到内陆点 Overland Continental Point OP 操作 Operation ORC 本地收货费用 Origen Recevie Charges P.

一般都规定租船人负担，即船方不负担装卸，理舱和平舱费条件（FREE IN AND OUT，STOWED，TRIMMED--F.I.O.S.T。）。

This is the so-called Duerlite algorithms: from the bottom row of the matrix A do elementary transformation, the diagonal elements into the bottom left of zero, and then show the effect of these lines is equivalent to transform the left by a unit lower triangular matrix, this series of unit lower triangular matrix inverse is the product of L matrices, it is also a unit lower triangular matrix.

这正是所谓的杜尔里特算法：从下至上地对矩阵A做初等行变换，将对角线左下方的元素变成零，然后再证明这些行变换的效果等同于左乘一系列单位下三角矩阵，这一系列单位下三角矩阵的乘积的逆就是L矩阵，它也是一个单位下三角矩阵。

C 码头收柜费 Terminal Receiving Charge T/S 转船,转运 Trans-Ship T/T 航程 Transit Time TEU 20'柜型 Twenty-Foot Equivalent Unit 20' THC 码头操作费（香港收取 Terminal Handling Charges TTL 总共 Total TVC/ TVR 定期定量合同 Time Volume Contract/ Rate VOCC 船公司 Vessel Operating Common Carrier W/M 即以重量吨或者尺码吨中从高收费 Weight or Measurement ton W/T 重量吨 Weight Ton YAS 码头附加费 Yard Surcharges **L/C SIMPLE** Issue of a Documentary Credit BKCHCNBJA08E SESSION: 000 ISN: 000000 BANK OF CHINA LIAONING NO.

条件。 3。集装箱海运运费目前，集装箱货物海上运价体系较内陆运价成熟。

4 A direct plug-in unit having a mounting tab for semipermanent mounting shall be marked - on the unit , a marking tag , or an instruction sheet packed with the unit - with the word \"CAUTION \" and the following mounting instructions or the equivalent :"

"49.2.4 带有半永久安装使用的安装片的直插式电源单元，在标签或说明书上标上单词"CAUTION"和下列安装说明或与其类似的说明："

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的&瓶子模型&，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了&缝洞单元&的概念，并制定了&缝洞单元&纵横向划分的基本原则和依据及划分方法，并对&缝洞单元&进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

But for Nansha to accommodate large vessels such as the Cosco Guangzhou, which can carry more than 10,000 twenty-foot equivalent unit containers, the river must be continuously dredged.

但南沙港若想供像&中远广州&轮这样的大型船舶停靠，就必须不断疏浚河道。

When calculating the circulating quantity of container, we often take the 20-foot container as a measuring unit,i.e,TEU (Twenty-foot Equivalent Unit) to indicate it, it means "being equal to a 20-foot unit"

集装箱的一种最常用的规格，一般计算集装箱流通量时，都以这种规格为一个标准单位，称为&TEU&，意为：&20英尺相当单位&。

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸，那乌黑、忧郁的眼睛，她便会相信，他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失