查询词典 emission control

On the basis of stability analysis, the author takes the K27+825 slope from the type of slope which has lest stability as an example. According to its basic feature, the design ueses the choosed best reinforce and control scheme: lattice beam, anchor wire, grouting and abstraction of water. In the course of design, the author takes into account not only reasonable optimize of whole control plan but also local measure such as whether the unstable block will shear from vnlnerable sections when control plan is laid out concretely, in order to reach the goal of reasonable design and effective control.

在稳定性分析的基础上，以边坡稳定性最差的一类中的K27+825边坡为例，结合其自身的特点，用优选出的加固防治方案：框架梁+锚索斗灌浆+排水进行设计，设计中既考虑总体防治方案的合理优化，又充分考虑了加固工程的具体布置时是否存在不稳定体从锚索或框架梁的薄弱部位剪出的可能性等一些细部措施，以达到合理设计，有效及经济治理的目的。

Considering the vehicular SG cruise integrating model under braking condition influenced by some factors of nonlinearity, time-delay and the disturbance, a new nonlinear SMITH predictor is designed to compensate the time delays of control variable in advance. Furthermore, with the resort of pure delay operator, extension of the Lie derivative and the Lie bracket, some issues of SISO nonlinear system with time delays in state variable are resolved, which cover the input-output linearization, invertability of coordinate transformation and the disturbance decoupling problem.the staged transformation and design technique, the vehicle deceleration tracking control and the SG cruise disturbance decoupling control under braking condition are carried out effectively using proposed control method.

在建立制动工况下车辆走-停巡航系统集成模型基础上，针对其非线性、时滞特性以及目标车减速度干扰的影响，提出一种改进的非线性SMITH预估补偿方法，以消除控制变量时滞，并结合时滞算子、扩展李导数和扩展李括号方法，研究并解决了SISO状态变量时滞非线性系统的输入输出线性化、坐标变换的可逆性以及输出干扰解耦问题，实现了SISO时滞非线性系统的综合控制。

An impulsive control scheme of the Lur'e system and several theorems on stability of impulsive control systems was presented, these theorems were then used to find the conditions under which the Lur'e system can be stabilized by using impulsive control with varying impulsive intervals. The parameters of Lur'e system and impulsive control law are given, a theory of impulsive synchronization of two Lur'e system is also presented.

提出了Lur'e系统的脉冲控制系统，利用关于脉冲系统稳定的几个定理，得到了具变化的脉冲区间的Lur'e系统镇定的充分条件；并且给出了Lur'e系统的适当参数与脉冲控制律，使得两个Lur'e系统脉冲同步。

The paper used the boiler control system of a big enterprise that had 10 steam boilers and several control stations. It designed an integration control system which is composed of locale control part, man-machine conversation part and communication manage part.

本文针对某大型企业水暖分厂由10台蒸汽锅炉，多个控制站组成的锅炉群供热系统，设计了一套包括现场控制层、显示操作层和信息管理层的集成自动化控制系统。

In this paper, the basic principles of vector control, coordinate transformation, the mathematical model induction motor control and fuzzy theory, for vector control characteristics, the design of a rate based on fuzzy logic controller to form a new vector control system, using MATLAB / SIMULINK Software simulation analysis.

本文阐述了矢量控制的基本原理、坐标变换、异步电机的数学模型以及模糊控制理论，针对矢量控制特点，设计一个基于模糊逻辑的速度控制器来组成新的矢量控制系统，利用MATLAB/SIMULINK软件进行仿真分析。

But the development of modern control theory and technology of computer and meterage change the people s long notion of passive control and vibration reducing on rotating machanism. That is using modern control theory to active control the rotor bearing system. And then to change the design technique radically as to abstain the vibration accident.

现代控制理论和计算机技术与测量技术的发展，改变了人们长期对旋转机械被动隔振和减振的观念，即用现代控制论的思想，对转子-支承系统的振动主动的进行控制，从而在根本上改变设计方法，有效地避免振动事故。

The result of this thesis can provide the actual method to control the reactive flywheel better for the high accuracy satellite attitude control system. The key technique of the reactive flywheel applied in the high accuracy satellite attitude control system is mastered."Zero momentum control" at three mutually perpendicular axes of satellite is realized on the real meaning.

本文的研究成果为反作用飞轮的精确控制提供了实际的途径，掌握了反作用飞轮应用于高精度卫星姿态控制的关键技术，实现了真正意义上的卫星三轴"零动量控制"。

For optimizing the control system of the steel-wire napper, an embedded control system was developed, which use ARM platform implanted with the μC/OS-Ⅱ real time multitask kernel as the control centre and realize the control of the 6 separate motions of the napper through the RS-485 bus. Meanwhile, it is capable of making rapid response to the user's request and various malfunction signals.

为优化钢丝起毛机控制系统，以移植有μC/OS-Ⅱ实时多任务内核的ARM平台为控制核心，通过RS-485总线实现对钢丝起毛机6个独立运动的控制，并能对用户的要求及各种故障信息做出迅速响应。

According to the real time control experiment of the"3-2-1"type 6DOF platform, it proves that the real time motion control based on virtual simulation is a feasible control method. The designer himself needn't do the modeling and solving of the kinematic positive/negative calculation of the complex space structure and it deeply reduces the needs of the control hardware.

通过所进行的"3-2-1"型六自由度平台实时运动控制实验可以证明，所提出的基于虚拟仿真的实时运动控制是一种可行的控制方法，它不仅不需要设计者自己直接进行复杂空间机构的运动学正、反解的建模与求解，而且极大地降低了对系统控制硬件的要求。

Around the topic, the weak points of the traditional platform is analyzed first, such as complex arithmetic, long calculating time, high needs of hardware and so on. A real time control method based on virtual simulation is suggested to separate the complex positive/negative calculation of space kinematic and real time motion control. And a"3-2-1"type 6DOF platform is designed with the reference of the MAST (Multi-Axis Shaking Table) of MTS. The kinematic and dynamic calculation of the platform is finished. According to the calculating result, the control system of the"3-2-1"type 6DOF platform including 6 linear servo electric cylinders is designed and constructed. And the professional software Pro/E is used to do the 3D model and 6DOF motion simulation of the platform. The motion curves of the pistons of the 6 cylinders are exported with the simulation. At last the control software is programmed with Microsoft Visual Basic 6.0 and realizes the functions with the commands of GE series motion controllers. When loading the motion curves exported with the simulation, every cylinder can follow the curve very well and the platform realizes the hoped 6DOF motion.

围绕选题，本论文首先分析了传统的运动平台控制方法所存在的算法复杂、解算耗时长、硬件需求高的缺点，提出了一种基于虚拟仿真的实时控制方法，该方法将复杂的空间运动学正、反解与实时运动控制相分离；之后，参考MTS公司的MAST多轴振动平台，设计了新型的"3-2-1"型六自由度平台，并进行了运动学及动力学计算，根据相关计算结果，设计与搭建了包括驱动6个直线伺服电动缸在内的"3-2-1"型六自由度平台控制系统；接着，使用Pro/E对"3-2-1"型六自由度平台进行了三维建模和六自由度运动学仿真，并由仿真直接获得了6个直线伺服电动缸的活塞杆的相应运动曲线；最后使用Microsoft Visual Basic 6.0编写了控制软件界面，通过调用GE系列运动控制卡的各种命令函数实现了控制系统的相关功能，而当加载仿真得到的各缸运动曲线后，每缸均能很好地跟踪输入曲线，使平台实现了期望的多自由度运动。

Vishnu entered a dark fourth dimensional dream that did not support his field or continued life.

毗瑟挐进入了一个第四密度的黑暗梦想，那里并不支持他的能量场或继续生命。

Leaders and decision-making persons use it to collect the data, including the information of unit work, handing in fee, oweing fee, prepaying fee,changing and afterpaying and account transfering of joining-insurance employee, and account paying of all kinds of insurances from hospitalization insurance institutions.The collected data is picked up, organized, switched and showed to user.

该子系统主要面向各级领导、决策分析人员；从各个医疗保险经办机构和定点医疗机构采集数据，包括在各个医疗保险经办机构处理的单位办公信息，单位缴费、欠费、预缴费信息，参保职工变更信息，参保职工增减变动信息，参保职工补缴信息，参保职工帐户划拨信息：包括各定点医疗机构处理的各险种帐户支出信息，各险种的统筹金支付信息等；将采集的数据提取，组织和转换，然后展示给用户。