查询词典 electromagnetic contact

Based on the electromagnetic theory, analyze the character of electromagnetic force using two linear electromagnetic stirrers which were designed by our department. Investigate the rule of electromagnetic force and how the different parameter of casting and stirring influnce the solidification structure.

本文采用理论分析与实验研究相结合的方法，在实验室条件下，采用本系最新自行研制的行波磁场搅拌器对在行波磁场电磁搅拌作用下钢液内的电磁力特性、各种不同浇铸工艺参数以及搅拌参数对铸坯凝固组织的作用规律，进行了深入的研究。

They include all kinds of super mini sealed DC electromagnetic relay, sealed electromagnetic relay, sensitive electromagnetic relay, mini sealed electromagnetic relay, super mini high-power relay, super mini sealed hold relay, coaxial relay, super mini sealed relay, mini sealed temperature relay, high temperature relay, heat protector, priming system safety protector, separation control overload switch, wind speed relay, time relay, sealed switch, program controller and protector for over loading, etc., which are used widely in aviation, aerospace, electronic communication, home appliance, etc.

各类超小型密封直流电磁继电器，密封电磁继电器，灵敏电磁继电器，微型密封电磁继电器，超小型大功率继电器，超小密封保持继电器，同轴继电器，超小型密封继电器，微型密封温度继电器，高温温度继电器，热保护器，火工品安全保护器，分离控制过载开关，风速继电器，时间继电器，风器，密封断路器，程序控制器，过载保护器等广泛用于航空，航天，电子通讯，家用电器等领域，其产品远销欧洲。

On the basis of different frequences, three electromagnetic wave logging methods widely used are Electromagnetic Propagated Resistivity Logging with several mega-hertz operation frequency, Ultrahigh-frequency Electromagnetic Wave Logging with above 200 mega-hertz operation frequency and High-frequency Electromagnetic Wave Logging with some dozens of megaherz operation frequency.

根据所选频率的不同，电磁波测井有三类：几兆赫兹电磁波传播电阻率测井、200 MHz以上的超高频电磁波传播测井、源频率为几十兆赫的高频电磁波测井。

MSP430F169 microcontroller was the core components of control and measurement function of an electromagnetic relay characteristic parameter tester. The tester also included DC power module, power amplifier module, constant current source module, keys, and digital tube display module. The tester could test the data of 943-1C-12DS electromagnetic relays including the minimum pull-in voltage, maximum release voltage, relay coil voltage rating when the pull-contact time, release time as well as the contact value of the contact resistance. The system could complete automatic measurement parameters to achieve all the basic requirements of design. And all of the test data was displayed through the 74HC573 digital tube.

摘 要：以MSP430F169单片机作为控制和测量的核心部件，辅以直流稳压电源模块、功率放大电路模块、恒流源模块、按键和数码管显示模块等组成一个电磁式继电器特性参数测试仪，完成对943-1C-12DS电磁式继电器最小吸合电压、最大释放电压、继电器线圈电压为额定值时的触点吸合时间、释放时间以及触点接触电阻值的测试，该系统能够实现成套参数自动测量，所有测试数据通过74HC573数码管进行显示。

First, this article introduced 2 grade of rotary kiln principle of work and the equipment, to rolled the circle mechanics behavior to carry on the analysis, proposed - rolled the circle - under roller's rotary kiln overall modelling based on the tube body - kiln liner - big tooth ring, to rolled the circle - under roller's contact stress to carry on the finite element analysis the method, and obtained rolled the circle contact stress the size and the distribution rule, finally indicated that rolled the circle contact stress mainly to have two main peak values and the sudden change in one week, appeared is rolling the circle and the under roller contact area; Then, rolls the circle the stress to regard as is the principal stress unknown plane stress test, the use quite mature modern test technology, proposed rolls the circle stress test the principle and the plan, and to rolled the circle the stress to carry on the scene test, the stress which the scene test analysis result and the finite element analysis calculated has compared, had proven the whole method modelling's finite element analysis method's rationality and rolled the circle - under roller contact stress the result accuracy; Finally, uses ANSYS APDL the re-development technology, in view of 2 grades of rotary kilns, rolled the circle - under roller contact stress the overall finite element analytic method to carry on the re-development.

首先，本文介绍了2档回转窑工作原理和装置，对滚圈的力学行为进行了分析，提出了基于筒体-窑衬-大齿圈-滚圈-托轮的回转窑整体建模，对滚圈-托轮的接触应力进行有限元分析的方法，并得到了滚圈接触应力的大小和分布规律，结果表明滚圈接触应力在一周内主要存在两个主要的峰值和突变，都出现在滚圈与托轮接触区域；然后，把滚圈的受力看成是主应力未知的平面应力的测试，利用比较成熟的现代测试技术，提出了滚圈应力测试的原理和方案，并对滚圈的应力进行了现场测试，现场测试分析结果与有限元分析计算出的应力相比较，证明了整体法建模的有限元分析方法的合理性和滚圈-托轮接触应力的结果的正确性；最后，利用ANSYS的APDL的二次开发技术，针对2档回转窑，就滚圈-托轮接触应力的整体有限元分析法进行了二次开发。

Wenzhou Juxing Silver Contact Co, Ltd is a domestic expert electrical contact material company which integrates production, research and sales ***** is located at Wenzhou, a place full of natures treasures and never change our route-exploit and ***** are six categories and thousand of products, such as rivet contact, rocker contact, composite belt, powder metallurgy contact, profiled composite contact, silver alloy wire etc.which cover low voltage electrical appliances, electronics, communication, consumer electrical products, military, and so on.

温州市巨星银联系有限公司是国内专家电触头材料的公司，集生产，研究和销售*****位于温州，一个充分的性质县宝藏和永远都不会改变我们的路线，利用和*****六类和1000的产品，如铆钉接触，摇臂联系，复合带，粉末冶金联系，异型复合接点，银合金丝etc.which包括低压电器，电子，通讯，消费电子产品，军事，等等。

In order to master the technical characteristic of soft contact EMCC, and to certain the optimum electromagnetic processing parameters of soft contact EMCC, the combination of theoretical study and experimental study of 100mm×100mm billet casting processing by imposing 20kHz high frequency electromagnetic field were investigated.

为了掌握软接触电磁连铸的技术特征，确定方坯软接触电磁连铸所需最佳电磁工艺参数，本文采用理论和实验研究相结合的方法，对高频磁场（20kHz）方坯（100mm×100mm）软接触电磁工艺进行研究。

Firstly, the paper introduced the working principle and device of the two-pass grate-rotary kiln and had an analysis method of mechanics of the tyre. We have put forward the finite element analysis of the contact stress of the tyre-roller based on the whole construction mode of shell-kiln liner-large gear-tyre-roller of the rotary kiln and obtained the strength and distributing rule of the tyre's contact stress. The research shows that within one week the contact stress mainly lies in two leading peak value and catastrophe which appear at the contact zone of the tyre and supporting roller. Then we regarded the tyre's stress as the test of unknown plane stress of principal stress. Utilizing mature and modern testing technology, we raised the testing principle and scheme of tyre stress and then had a on-the-spot test of the stress. Comparing the analysis result of the test with the one calculated from the finite element analysis, it proofed the rationality of finite element analysis method of integral modeling and the correctness of the contact stress result of the tyre and roller. Finally, for two-pass of similar rotary kilns, using the ANSYS APDL re-development technology, carried on the re-development about the overall finite element analytic method of thecontact stress of tyre-roller.

首先，本文介绍了2档回转窑的工作原理和装置，对滚圈的力学行为进行了分析，提出了基于筒体-滚圈-托轮的回转窑整体建模的有限元分析法，来对滚圈-托轮的接触应力进行有限元分析与计算，得到了滚圈接触应力的大小和分布规律，并求得滚圈外中内圈节点的主应力；其次，把滚圈的受力看成是主应力未知的平面应力的测试，利用现代测试技术，提出了滚圈主应力测试的原理和方案，并对滚圈的主应力进行了现场测试，现场测试分析结果与有限元分析计算出的主应力相比较，证明了整体法建模的有限元分析方法的合理性和滚圈-托轮接触应力结果的正确性；最后，利用ANSYS的APDL的二次开发技术，针对2档同类回转窑，就滚圈-托轮接触应力的整体有限元分析法进行了二次开发。

The difference of mean intraocular pressure among readings obtained with the lens in place, after lens removal and lens reinsertion were not statistically significant in bandage contact lens group and in low myopic contact lens group. But the high myopic contact lens group showed statistically significant difference of mean intraocular pressure obtained with the lens in place, after lens removal and lens reinsertion. In addition, the intraocular pressure readings measured immediately after myopic contact lens reinsertion revealed poor reliability.关键词 Tono-Pen , Soft contact lenses

我们把受测者分为三组：低度近视组，高度近视组和配戴治疗性隐形眼镜组，每组分别以受测者未戴隐形眼镜时的眼压做基准，而以其他三种情形的眼压分别与之比较，结果发现以Tono-Pen测量低度近视组和配戴治疗性隐形眼镜组的眼压值可信度较高，但是戴上隐形眼镜之后马上测量的眼压值较不准确，而高度近视组的测量值则出现变异的现象，可信度较低。

The formulation for the contact force between two spheres and the stress and displacement which is caused because of the contact force is also derived. The calculation method of the contact of sphere and plane, sphere and tee is given .At the same time, the formulation for the force distribution of the contact surface is established on the discussion of two arbitary elastomer's contact.

第二章以《弹性力学》理论为基础，详细地介绍了接触单元理论，导出了两个球体之间的接触压力及由此引起的应力和变形，给出了球体与平面相接触、球体与球座相接触的计算方法，同时，对于两任意弹性体接触的讨论，得到了接触面上压力分布的公式。

A carrier gas such as nitrogen is directed through line 20 and valve 22 to connect with line 26 and mix with the gas sample.

如氮气之类的载体通过管线20和阀22引入，与管线26相通，与气体样品混合。

But for the most part, knaves and parasites had the command of his fortune

然而支配他的家产的大多是恶棍和寄生虫。