查询词典 discussed

Based on a thorough analysis of the character and mechanism of city-retaining-wall structures, the design theories, construction technology, new wall types and development tendency are deeply discussed. Besides, the characteristics of various types of city retaining wall are discussed, and the usual methods for earth pressure calculation are summarized. For the anchored bar retaining wall, the anti-pulling bearing mechanism of anchored bar is first probed into, from which anti-pullforce computation method are obtained. Combined with quite a few engineering examples and spot tests, the advised design and calculation methods of anchored bar are verified. From the abundant spot measured date, an adjusted hyperbolic model is put forward to determine the anti-pullforce bearing capacity. Furthermore, a new type of H-like block retaining structure is advised with its working mechanism deeply discussed as well.

本文在综合分析目前常用城市挡土结构的特点及其受力特性等基础上，针对一般挡土墙设计理论、施工技术、新型结构以及未来的发展趋势进行了深入探讨，论述了城市挡土结构的特点，并对常用土压力理论进行了综述，介绍了城市挡土墙常见的类型，并介绍了常规的设计理论和方法；通过分析比较，优选出锚杆挡土结构和砌块式挡土结构，并从锚杆锚固原理出发，结合工程实践和大量现场试验、对锚杆的抗拔承载力进行了深入研究，提出了用调整双曲线模型法计算锚杆抗拔承载力的方法，对土压力计算方法进行了探讨，对其设计计算方法进行了研究。

In the thesis, research on network vulnerability analysis and IP traceback is discussed.Under the background of "IP network topology and analysis of performance based on network detection" supported by NSFC, Distributed Network Measurement and Analysis Infrastructure, the cooperant result of our workgroup, is discussed, and also the significance of network vulnerability analysis and IP traceback research in DNMAI; Several existing advanced vulnerability analysis methods and models are compared and summarized. Advantages and disadvantages of each technique are discussed in detail.

论文以国家自然科学基金重点项目(基于网络探测的IP网络拓扑发现和性能分析)工作组提出的分布式网络测量和分析基础架构为背景，在网络脆弱性分析和反向追踪方面做了一些研究工作：说明了脆弱性分析和反向追踪研究在DNMAI架构中的意义和作用；对现有网络脆弱性分析领域的几种先进模型和技术进行分析、比较和综述，详细讨论了各种技术的优缺点。

Main points of the thesis are as follows:(1) The main function models and information relations between these models in the CAPP system in the integrated CAD/CAM project are explained, a new process plan design method is mentioned based on analyses of process plan design. This method is based on the process plan prototype, and develops the prototype little by little until the perfect process plan is completed, the prospect of this method is discussed;(2) The feature abstracting rules and methods are studied, a feature coding system is developed based on GT, all the defined feature models are described by the mathematical methods;(3) The integrated method of CAD/CAPP based on features is mentioned, this method defines a feature exchanging model, and develops an interface software to exchange design data into technology data base, this technology data base includes the design and technology information of the parts;(4) The process plan reasoning method based on features is created, this method uses Mycin algorithm to solve the reasoning of the feature process plan. A process plan making system is developed. In this system part process plan is made by the semi-intelligent method, this method uses the feature reasoning, feature process chain searching and man-computer talking together;(5) The main structure of the HOPE system is introduced, a shaft drawing and its process plan made by this system are shown, the data process problem in process drawing making is also discussed;(6) A new method of describing process rule is introduced, this method uses IfThen rules and neural nets weight values together to describe process rules, the BP algorithm is adopted in this method;(7) The optimal machining sequence problem of the process steps on the same fixturing is discussed, optimal algorithms SA is applied to solve this problem, the result shows that this method is more efficient than the traditional method;(8) All jobs in the thesis are summarized. In order to carry out the research in the future, some rational proposals are given.

全文论述的内容主要有下列几个方面：(1)较为系统地阐述了CAD／CAM一体化工程项目中CAPP系统的主要功能模块及其信息流程，在分析工艺设计过程的基础上，提出了基于特征原型的渐进式工艺设计方法，并探讨了该方法的应用前景；(2)研究了零件特征提取的原则和方法，在成组技术的基础上，开发了一套基于特征的分类编码系统，并在提取零件特征的基础上，定义了零件特征的数据模型，开发了基于轴类零件特征的参数化设计系统；(3)研究了基于特征的CAD／CAPP集成的方法，通过定义零件特征数据模型的存储结构，开发了将设计数据转换到工艺数据库中的接口程序，为后续的CAPP系统提供必要的零件形状和工艺信息；(4)研究了基于特征的工艺推理方法，将Mycin算法应用到工艺决策中，开发了基于特征的工艺推理及工艺方案生成系统，在系统中综合运用特征推理、特征加工工艺链查询及人机对话相结合的半智能化方法确定零件加工工艺；(5)介绍了整个HOPE系统的总体结构，通过运行HOPE系统绘出了一轴类零件的零件图，并生成了该零件的加工工艺方案，初步探讨了基于特征的工序图生成技术中数据处理问题；(6)研究了工艺设计过程中知识如何有效表示的问题，提出了将显式的IF-THEN规则表示与隐式神经网络权值表示相结合的工艺知识表示方法，并利用BP算法进行了工艺知识表示的初步研究；(7)研究了工艺设计过程中同一安装下工步优化排序问题，利用神经网络中基于模拟退火的理论来解决该工步优化排序问题，实践证明该方法较传统的算法具有更高的效率；(8)总结了本文所进行的研究工作，为今后进一步开展工作提出了较为合理的建议。

There are three parts in the main body of the thesis: first the author discussed the origin of charitable spirit, the change in the spirit and acts of modern charities and its new features; meanwhile, the author also gave an introduction of the purpose and scope of charities; second, the author made a further discussion on basic causes of the development of almshouses and charitable associations in Chongqing during that period, their organizational system; and then discussed the breeding fields with modern features and some characters of clan, and some problems and disputes happened among them, and then discussed the relationship among government, civilian, and gentry. Finally, the author gave a summary of the difference and indifference of the charities in Chongqing and Shanghai by comparing of them.

正文首先，论述了中国慈善思想的源流，近代慈善事业在思想与办善举措上的转变状况，以及慈善事业出现的新特征，同时，介绍了慈善事业的落脚点与范围；其次，论述了清末民初重庆综合善堂、善会发展的根本原因，以及善堂、善会的基本建制：接着论述了重庆具有近代特色与宗族特点的教养工场，以及民间善堂、善会中出现的问题与纠纷，并由此分析了官一民一绅在慈善事业中的关系；最后，通过对重庆与上海两地慈善事业的比较，总结了慈善事业在两地的异同。

The method of obtaining time delay parameters with the reverse access channel is discussed. The modified algorithms of classic correlation methods of TOA estimation are proposed. Noncoherently combining algorithm and group coherent combining algorithm are given. They decrease the computational complexity and are more suitable for implementations in practical systems. The leading edge detection algorithm is proposed to mitigate the effect of multipath in TOA estimation. Then the secondary search method is proposed, it can solve the matching issue of PN code in CDMA systems. The location algorithms based on LS are discussed; include circular trilateration with LS, hyperbolic trilateration with reference differencing, hyperbolic trilateration with sequential differencing and circular trilateration with TOA differences. The design and implementation of wireless location system based on TOA/TDOA in CDMA2000 systems are given. The location process is discussed, and the hardware and software implementation of TOA estimation are given. Finally, the wireless location system which uses TOA estimation and LS location algorithms above is tested in the real environment.

文中讨论了采用CDMA2000反向链路中的接入信道来获取时延的方法和过程；对TOA估计的传统的相关法进行了改进，提出了非相干合并相关法和分组合并相关法，减少了基于相关的时延估计算法的运算量，提高了算法的实用性，对算法进行了仿真和性能分析；采用边缘检测技术有效减少了TOA参数估计中的多径干扰，提高了时延参数估计的准确度；提出了一种TOA估计的二次搜索法，解决了多个定位测量单元同时进行TOA估计的PN码匹配问题，进一步了提高TOA估计的精度；在采用时延值的定位算法中引入了基于LS的圆周法、基于参考差的双曲线法、基于相邻差的双曲线法和基于TDOA的圆周法，讨论了各算法的应用条件，进行了算法性能的仿真分析；给出了CDMA2000系统中的TOA/TDOA的无线定位的系统方案和实现流程，并对TOA值估计算法进行了软硬件实现，还对采用TOA估计算法、LS定位算法和定位系统设计方案实现的定位系统的进行了现场定位性能测试。

We discussed the total design of WEDM CNC programming system based on the Object Oriented Programming idea, studied the fitting method of a plane curve, used an efficient and stable curve approximating method; studied the planar translations of graphs and arc copulations between curves; discussed the interface technology to popular CAD software; discussed letters and images automatic programming system, and brought out a simple and convenient

该软件以PC为开发平台，以Windows为操作系统，采用了图形交互的编程方式，界面友好，操作方便。

The definition of the absolute value for a fuzzy number is obtained.Furthermore,a lot ofproblems,such as absolute integrability,bounded variation and absolute continuity,arepresented and discussed.The representation theorem of the absolute values of fuzzy num-bers is established.It plays an important role in discussing the problems conceming theabsolute value.The relation between the absolute integrability and integrabili-ty is discussed,and the following result is obtained:aintegrable fuzzy-number-valued function is absolutely integrable iff it is integrable.The relation between theabsolute integrability and the absolute continuity of the primitive for fuzzy-number-valuedfunctions is dealt with.It is also pointed out that a fuzzy number valued function is ab-solutelyintegrable if and only if its integral primitive is fuzzy absolutely continuous.

提出了模糊数绝对值的概念并讨论了与绝对值相关的一系列问题，如绝对可积性、有界变差性、绝对连续性等，给出了模糊数绝对值的定义以及表示定理，该表示定理在涉及绝对值问题的讨论中起非常重要的作用；讨论了绝对可积与可积之间的关系，得到了结论：可积的模糊数值函数绝对可积的充要条件是该模糊数值函数可积；给出了模糊数值函数绝对可积与其积分原函数绝对连续性之间的关系，指出模糊数值函数绝对可积的充要条件是其原函数模糊绝对连续。

Secondly, the web-based remote monitoring and diagnosis system is studied, and then the architecture of remote monitoring and diagnosis system is established in integrated environment of Infranet / Intranet / Internet and the integration methods of information in these environment is discussed, at the same time, the model architecture and key techniques of remote collaborative diagnosis are studied/Then a kind of remote monitoring and diagnosis system model based on mobile agent is established, and the system realization methods are discussed on IBM Aglet platform.

本文首先阐述了国内外远程监测诊断系统的研究现状和发展趋势；其次，在分析了目前制造装备远程监测诊断模式存在不足的基础上，并在Infranet／Intranet／Internet集成环境下，提出了基于Web的制造装备远程监测诊断系统的体系结构，探讨了系统的信息集成方式；然后对远程协同诊断技术以及如何将移动Agent用于制造装备远程监测诊断系统进行了研究，并以IBM的Aglet平台为例论述了系统的实现方法。

In this paper, the bump patterns for flip-chip packages are discussed first, then an experiment is setup to study the dispensing phenomena for different bump patterns, and the CAE software is used to analyze and identify with experiment mutually. From these thorough comparisons and analytical analysis, the existence of channel could slow down the flow, the high density of bump could speed up the flow, and it could avoid the air trap by modified the bump and channel's arrangement on flip-chip package. Then flows in rectangular microchannels driven by capillary force and gravity are discussed; furthermore, the theoretical model of flow in microchannel driven by capillary force and gravity is formulated from the Navier-Stokes equations.

本文首先针对覆晶底部充填进行相关理论推导、实验与模拟，探讨不同凸块配置模型所造成的波前不平滑现象对底部充填流动的影响；即依据相关参数建立模型进行底部充填实验，同时以CAE(Computer-Aided Engineering)模流分析软体进行模拟，在完成理论探讨、实验与模拟分析之后，交叉比较理论、实验与模拟分析结果，归纳出影响底胶充填流动之因素，由结果显示在凸块密集度较高的区域，凸块可以帮助流动，但是在凸块区后方的沟槽区域则因为凸块区所提供之流量不足，所以会造成波前落后的现象，另外藉由修改凸块与沟槽配置的关系，可以有效的控制波前形状的变化情形，避免产生包风现象。

Based on mechanism and vehicle theories theoretical analysis is pursued and normal driving conditions are put forward. The relations are analyzed between load distribution and power consumption. Mechanical formula is proposed. Furthermore in this paper the theoretical model of the total power consumption is established, and the relations of the total minimized power consumption with the air-cushion pressure and the fan revolution are discussed. The optimum operation point is put forward. The dynamic digital simulation studies are carried out on the operating procedure of the half-track air-cushion vehicle on soft terrain. Mechanical parameters and soil mechanics characteristics affecting vehicle power consumption and riding performance are analyzed. At the same time according to the model formula, the automation control problem is discussed. It is a theoretical instruction for further automation control.

本文还从力学和车辆原理的角度进行了理论分析，推导了半履带式气垫车的需求功率及正常行驶条件，研究了气垫压力和功率消耗之间的关系，提出了力学模型公式；建立了半履带式气垫车总功率消耗的理论模型，研究了最小功率消耗时功率与垫压及表征气垫车行驶状态的各参数的关系，分析了相应的影响因素，并提出了最佳工作状态的定义；同时进行了半履带式气垫车在软地面的行驶过程的动态数字仿真试验研究工作，对影响车辆功率消耗和行驶平顺性的各力学参数和土壤参数进行了分析，得到了各运行状态参数的变化规律，验证了最佳工作状态和最佳垫压的理论，根据力学模型公式对进一步的自动控制问题进行了探讨，为系统的控制提供了理论指导。

Liapunov—Schmidt method is one of the most important method in the bifurcation theory.

Liapunov—Schmidt方法是分叉理论的最重要方法之一。

Be courteous -- even when people are most discourteous to you .

要有礼貌──即使当別人对你最不礼貌的时候。