查询词典 cooling curve

The purpose of this study is the exploitation of new dedicated outdoor air conditioning system, and use the PLC to control the refrigerant loop to make the same machine to achieve three models: cooling、heating and dehumidify with cooling model.

本研究开发新型独立式外气空调系统，并将程式撰写於可程式控制器来控制冷媒回路使同一台机组下达到三种模式包括︰冷气模式、暖气模式与低温低湿模式。

Comparing with conventional air handling process, the liquid desiccant air-conditioning system can dehumidify air without cooling down to its dew point. Meanwhile, counteraction cooling and heating can be avoided, which usually happened in conventional air handling process and led to huge energy waste. In addition, during the air handling process no condensation water separates out of the air in the liquid desiccant air-conditioning system, thus, avoid fungi thrives in moist environment of traditional air handling process. Not only being applied in dehumidification process in summer, the system can also realize humidification process in winter conditions efficiently.

与传统的空气处理方式相比，采用溶液式空气处理方式，具有如下优越性：取消了冷凝水表面，消除了霉菌等生长所需的潮湿环境；既可以对空气除湿处理，又能实现冬季对于空气的加湿处理过程；可方便调节处理后的相对湿度，不再是常规冷凝除湿方式中接近100%相对湿度的出口空气参数；避免了常规空调系统冷凝除湿后温度过低还需再热带来的冷热抵消问题；可以充分利用低品位能源如太阳能和废热实现溶液再生，节省系统电耗。

The furnace body is made ф2200×1500 the outer covering main body by the 12mm steel plate, lower part the furnace body 45° the installment has the sensor, the sensor orientation silicon steel plate is made the weight 2 ton induction iron cores by Wuhan Steel Corporation Silicon steel plate Factory production top gear's W-151 the cold rolling 0.35m/m, primary is made the water cooling coil by 10×10×2 the copper pipe, and installs the stainless steel water cooling restricting, the power frequency has the core smelting furnace's metal melt fluid namely for the sensor sencondary coil, the entire electric stove is a transformer actually, the necessary 6 grades from the pair regulating transformer, shift gears by the electricity cabinet control, the voltage may from low to high, divide 6 promotions to arrive at 380V, each grade of voltages are different, the output is also different, the furnace temperature along with the files position is also different, but the height is different, adapts smelts colored or the black and so on melting point different metals, and may make the new furnace lining to smelt diamantine drying furnace fireproof.

炉体由12mm钢板制成Ф2200×1500外壳主体，炉体下部45°安装有感应器，感应器由武钢硅钢片厂生产的最高档的W-151冷轧0.35m/m取向硅钢片制成重2吨感应铁心，初级由10×10×2铜管制成水冷线圈，并安装不锈钢水冷保护套，工频有芯熔炼炉的金属熔液即为感应器的次级线圈，整个电炉实际就是一个变压器，配套一台6档的自耦调压变压器，由电柜控制换档，电压可由低到高，分6级升到380V，每档电压不同，输出功率也不同，炉温也随档位不同而高低不同，以适应熔炼有色或黑色等熔点不同的金属，并可作新炉衬耐火冶金砂烘炉之用。

The furnace body is made ф2200×1500 theouter covering main body by the 12mm steel plate, lower part the furnace body 45° the installment has the sensor, the sensor orientation silicon steel plate is made the weight 2 ton induction iron cores by Wuhan Steel Corporation Silicon steel plate Factory production top gear's W-151 the cold rolling0.35m/m, primary is made the water cooling coil by 10×10×2 the copper pipe, and installs the stainless steel water cooling restricting, the power frequency has the core smelting furnace's metal melt fluid namely for the sensor sencondary coil, the entire electric stove is a transformer actually, thenecessary 6 grades from the pair regulating transformer, shift gears by the electricity cabinet control, the voltage may from low to high, divide 6 promotions to arrive at 380V, each grade of voltages are different, the output is also different, the furnace temperature along with the files position isalso different, but the height is different, adapts smelts colored or the black and so on melting point different metals, and may make the new furnace lining to smelt diamantine drying furnace fireproof.

炉体由12mm钢板制成Ф2200×1500外壳主体，炉体下部45°安装有感应器，感应器由武钢硅钢片厂生产的最高档的W-151冷轧0.35m/m取向硅钢片制成重2吨感应铁心，初级由10×10×2铜管制成水冷线圈，并安装不锈钢水冷保护套，工频有芯熔炼炉的金属熔液即为感应器的次级线圈，整个电炉实际就是一个变压器，配套一台6档的自耦调压变压器，由电柜控制换档，电压可由低到高，分6级升到380V，每档电压不同，输出功率也不同，炉温也随档位不同而高低不同，以适应熔炼有色或黑色等熔点不同的金属，并可作新炉衬耐火冶金砂烘炉之用。

Utilizing this simulated program, it analyzes that R11 and cooling water affect to the diathermanous performance of condenser, discusses the condenser structure depending on the working-fluid, cooling water, temperature, velocity of flow.

探讨了冷凝器结构尺寸随着工质和冷却水压力、温度、流速之间的变化关系。

Based on analyzing the dilatometric curves, metallographic structures of test samples of these simulation procedures, four factors which have influences on the tendency of the appearance of the cold cracks in HAZ have been studied, these factors are preheating, slow cooling, expanding the cooling time (t8/5 and t8/3), and heat preservation.

通过对这些模拟过程的热膨胀曲线、试样金相组织等的分析，研究了焊前预热、焊后缓冷、延长冷却时间t8/5与t8/3、焊后保温这四种因素对焊接热影响区冷裂纹产生倾向的影响。

By the method of dilatometric change,combining with microscopic test and hardness measurement,different expanding curves of continuous cooling transformation were measured at different cooling rate,and CCT diagram was obtained by using DIL805A thermal expansion fast phase transition instrument.

利用膨胀法，结合金相法和硬度法，在DIL805A热膨胀快速相变仪上测定了该钢在不同冷速下连续冷却时的热膨胀曲线，获得了该钢的连续冷却转变曲线；研究了该钢连续冷却过程中奥氏体转变过程与组织变化。

The transformation of C-Si-Mn TRIP steel during continuous cooling in two static conditions was studied by dilatometry. The effects of cooling rate and austenitizing process on the microstructure were analyzed.

利用热膨胀法研究了C-Si-Mn系TRIP钢在两种静态条件下连续冷却转变时的相变规律，分析了冷却速度、奥氏体化工艺对组织的影响。

The paper analyses the cooling process of symmetrical and dissymmetrical section profile with FEM software ANSYS, then adopt the data to guide the design of moulds cooling system.

使用有限元分析软件ANSYS分析了对称截面和不对称截面两种型材在定型模内冷却的过程，并采用分析得出的数据指导定型模冷却系统的设计。

ABSTRACT Vacuum cooling is a rapid evaporative cooling technique, which is widely used in food industry.

真空冷却是一种快速蒸发冷却技术，近年来广泛应用于食品工业。

You can snipe the second and third union leaders from this position.

您可以鹬第二和第三工会领袖从这一立场出发。

Aiming at the currently shortage of XML streams quality detecting, this paper proposes a new forecasting method of XML streams quality by least squares support vector machines, which is used the method of XML keys' vector matrix as windows, and vector product wavelet transform to multilevel decompose and refactor the XML streams series, that can fulfill real-time checking demand of XML quality, and ensure constraint, consist- ency and integrality. For even more adapting net load, it proposes a control strategy by weight and adaptive adjustment to ensure XML streams quality.

针对当前XML数据流质量检测存在的不足，提出构建XML键的矢量矩阵作为窗口，利用矢量积小波变换多级分解与重构XML数据流，再结合最小二乘支持向量机对XML数据流质量进行预测的一种方法，满足XML数据流质量重构时实时检测的要求，保证XML数据的约束性、一致性与完整性；为了更好的适应网络负载，采取加权与自适应窗口调整等调度策略充分保证XML数据流的质量检测。