查询词典 conversion speed

To change the representation of data from one form to another without changing the information they convey, e.g., radix conversion;code conversion; conversion from punched cards to magnetic tape; analog to digital conversion.

把数据从一种表示形式转换为另一种表示形式而不改变它所表达的信息。例如，基数转换、代码转换、穿孔卡片到磁带的转换、模-数转换。同transform。

This paper discuss the key techniques used in Stroke to Raster Scan Conversion: The fundamentals of video scan conversion. A practical scan conversion system based on CPLD is proposed, in which CPLD is used to control SRC system flexibly and it realizes stroke to taster scan display system conversion.

本论文分析了随机扫描到光栅扫描转换的关键技术，即视频扫描转换的基本原理，并给出了一种实际实现方案，构建了以CPLD为控制核心的扫描转换硬件系统。

The area is small to the highest ( conversion efficiency 13 - 15%, some have achieved more than 20%) of monocrystalline silicon solar energy cell conversion efficiency, and output power is big, and stability is good, grows ( generally can reach more than 20 years ) service life, but the raw and processed material cost height, the weak light specific property is wronger, and production technology is complicated, hence the selling price is also higher; The polycrystalline silicon solar energy cell is basic identical with the function characteristic of monocrystalline silicon solar energy cell; The conversion efficiency of non- brilliant silicon solar cell than hangs down ( simples about 6 - 8%), the area is than greatly, but because of his raw and processed material cost than hanging down, can be easy to big area industrialize production, what will have hope to be used the generally big area to generate electricity from now on most will be this kind of application that battery is along with manufacture technique and new material, in a single day the practical package photoelectricity conversion efficiency of its big area achieves more than the 10-15%, and the price of every tile electric power-generating equipment is fallen 1 - 2 U.S.dollar of time, and just is enough to that the solar energy cell efficiency that big area the getting extensive use will constantly replace in now convention certainly special use and the laboratory of sources of energy s will high get many.

单晶硅太阳能电池转换效率最高（转换效率13～15%，有的已达到20%以上），面积小，输出功率大，稳定性好，使用寿命长(一般可达20年以上)，但原材料成本较高，弱光特性较差，生产工艺复杂，故售价也较高；多晶硅太阳能电池与单晶硅太阳能电池的性能特点基本相同；非晶硅太阳能电池的转换效率较低（约6～8%左右），面积较大，但因其原材料成本较低，可便于大面积工业化生产，今后最有希望用于一般大面积发电的将是这种电池。随着制造技术和新材料的应用，一旦它的大面积实用组件光电转换效率达到10-15%以上，每瓦发电设备的价格降到1～2美元时，便足以大面积得到广泛应用并将不断取代现在常规能源。当然特殊用途和实验室中的太阳能电池效率要高得多。

The present dissertation deals with:(1) Exploring the feasibility of the CO〓 methanation and the conversion CH〓/H〓 into C〓 hydrocarbons under plasma with catalyst at ambient temperature and atmosphere.(2) Designing a reactor and preparing some catalysts suited for the conversion of carbon dioxide via the cooperation effect of plasma and catalysts.(3) Optimizing reaction conditions of conversion carbon dioxide to C〓 hydrocarbons in the proposed process.(4) Studying the reaction mechanism of conversion carbon dioxide to C〓 hydrocarbons under plasma by using in situ OES technology.(5) By the results of characterizing coked catalysts, exploring the reasons that result in the coking of catalyst and the paths for decreasing the deposit in the catalyst under plasma.(6) Analyzing the energy efficiency of the plasma catalysis and exploring the paths for improving the energy efficiency.

论文的主要研究工作包括：（1）探索脉冲电晕等离子体与催化剂共同作用CO〓／H〓甲烷化和由CH〓/H〓合成C〓烃反应的可行性；（2）研制等离子体催化CO〓转化的反应器和适配的催化剂；（3）优化等离子体催化CO〓转化制C〓烃反应的工艺条件和电参数；（4）利用原子发射光谱原位技术对等离子体反应的诊断结果，对等离子体催化CO〓转化制C〓烃反应的机理进行推断；（5）通过对积碳催化剂的表征结果，分析积碳的类型及其成因，并探讨减少积碳的途径；（6）通过对等离子体催化CO〓转化制C〓烃反应能量效率的分析，探讨提高等离子体催化反应能量效率的途径。

A design and implementation method of the high speed modulation system, which adopted the new techniques of the FPGA and DAC based communication system,is presented in this paper. The effect of the key techniques of this system, such as the high speed digital signal processing for modulation, high speed based-band signal conversion, wide-band modulation, carrier suppression, high frequency and high precision system clock generation, is analyzed, and the solutions and performance analysis is also given. Finally, a high speed modulation system for space applications is implemented, can be used for high speed data transmission with QPSK, 8PSK, QAM or other kinds of digital modulation.

本论文依据正交调制原理，采用基于FPGA和DAC的设计技术，提出了一种高速、灵活的调制系统的设计方法，重点分析了系统组成的调制编码映射、基带脉冲信号转换、信号滤波、调制、系统时钟产生等关键技术环节的影响，解决了高速调制信号处理、高速数据转换、宽带调制、载波抑制、高频率高精度系统时钟的产生等关键技术问题，完成了一种适用于空间应用的高传输速率、多进制数字调制方式和调制体制灵活的数据传输调制系统的设计与实现，可在硬件设计不变的情况下，实现QPSK、8PSK和16QAM等多种调制方式的高速数据传输，QPSK调制速率达到500Mbps。

Meanwhile, it was difficulty to apply angle conversion system to practical goniometry curcuit. The fast following-up conversion was improved and a high-precision dynamic goniometer system and a nonlinear high-speed following-up conversion mode based on inductosyn were proposed, which were applied to the serve system of some weapon. The results of the dynamic and static tracking indicated that the servo system with fewer errors could satisfy the requirements of the accuracy.

对快速跟踪型轴角转换方法进行了改进，提出了一种基于感应同步器的高精度动态测角系统及非线性快速跟踪型转换方式，并在某武器伺服系统中进行了应用，动静态跟踪结果表明该伺服系统的误差较小，满足精度的要求。

Meanwhile, it makes it difficult to apply angle conversion system to practical goniometry curcuit. The paper makes improvement on the fast following-up conversion and proposes a high-precision dynamic goniometer system and a nonlinear high-speed following-up conversion mode based on inductosyn. It analyses the causes contributing to the error and deduces the expression bf the basic goniometry errors caused by output signal inaccuracy, and also puts forward the bounds on error of axis-to-angle converting.

对快速跟踪型轴角转换方法进行了改进，提出了一种基于感应同步器的高精度动态侧角系统及非线性快速跟踪型转换方式，分析了产生轴角转换误差的主要原因，推导出由输出信号误差引起的基本测角误差表达式，并提出了轴角转换的误差界。

Researches show that the drive force characteristics of the electric tractor drive system based on series DC motor is close the ideal characteristics, the curves are concave, low speed with constant power, and high speed with constant torque; the electric tractor has large working speed under different shifts, but the extensive coincidence speed shows that the variable ratio of the gear is unreasonable; the maximum climbable gradient of this electric tractor is more than 30%, and does not need frequent shift when working for its extensive climbable gradient; there are many influence factors of continuous working time, which the more obvious factors are working speed and working load, the working time increases with the increase of the working speed and working load.2. Simulation researches on the drive characteristic of the electric tractor.

研究结果表明：基于串励直流电动机(来源：ABC21论文网www.abclunwen.com)的电动拖拉机电驱动系统的驱动力特性场接近理想驱动力特性场，其各挡下的驱动力特性是一组下凹的曲线，低速恒转矩，高速恒功率；同一行驶速度下所对应高挡驱动力大于低挡驱动力，这是由电机的调速特性决定的；电动拖拉机各个挡位下具有较广的稳定作业速度范围，但是各个挡位之间速度重合的范围较多，说明所用变速箱变速比与电动机匹配不合理；电动拖拉机最大爬坡度达到30%以上，并且各挡爬坡度变化范围较广，作业过程中不需要频繁换挡；影响电动拖拉机连续作业时间的因素较多，其中作业行驶速度和作业负荷影响最为明显，作业负荷越大，连续作业时间就越短，作业速度越快，连续作业时间就越短。2、电动拖拉机驱动特性仿真研究。

Regarding the speed along with the displacement even change's uniform non-uniform linear motion, its acceleration should define like this: At the unit displacement the speed change (the physics significance is: The speed along with the displacement change "the speed"), like this has:, the acceleration unit should be , Expression speed change which causes in proportion to as a result ,of the speed action of force.if the final velocity is 0, acts according to , namely .

对于速度随位移均匀变化的匀变速直-运动，它的加速度应该这样定义：在-位位移上速度的变化（物理意义是：-速度随位移变化的"快慢"），这样-有：，加速度的单位应该是，表示由于正比于速度的力作用而引起-速度的变化，其中。如果末速度为0，则根据，即。

The main research content is: Using the experimental of cutting force and roughness of high speed face milling cutter and high speed end milling cutter mill aluminium alloy and cast iron, analyze the rules of the high speed milling velocity, feed rate per tooth, milling depth and milling width to high speed processing. Use multiple linear regression method, set up surface roughness and the cutting force fluctuation models. Certify the regression model notability, and provide a reliable guarantee for the accuracy of function optimization. Based on the targets of productivity, manufacturing cost, surface roughness, cutting force fluctuation optimization model, according to research of the high speed milling parameters selecting restrict of work piece, machine, tool and safety, set up high speed milling parameters multi-object optimization system.

本文以已有的高速铣削机理及高速刀具技术研究成果为基础，结合高速铣削试验，进行了基于遗传算法的高速铣削参数优化研究与系统开发，主要的研究内容为：通过高速面铣刀和高速立铣刀加工铝合金和铸铁等材料的切削力和表面粗糙度试验，进行了铣削速度、每齿进给量、铣削深度和铣削宽度对高速铣削加工过程影响的研究；采用多元线形回归的方法，建立了切削力及其振幅和表面粗糙度模型，并对模型的显著性进行验证，为高速铣削参数优化模型的建立奠定了基础。

A carrier gas such as nitrogen is directed through line 20 and valve 22 to connect with line 26 and mix with the gas sample.

如氮气之类的载体通过管线20和阀22引入，与管线26相通，与气体样品混合。

But for the most part, knaves and parasites had the command of his fortune

然而支配他的家产的大多是恶棍和寄生虫。