查询词典 continuous current

The socket structure is provided with a zero phase trigger control unit, through the photoelectric sensing element of the unit, optical coupling can be performed to generate zero phase trigger, and the opening or the closing of a two-way thyratron in the zero phase can be accurately controlled, therefore, an electric device inserted on an output socket can be started or stopped from the zero phase, in order to reduce the electromagnetic interference and prolong the service life of the electric device, the use efficiency of the electric device can be enhanced, the power supply thereof can be saved, filtering and rectifying can be performed through a current switching unit when the alternating current power supply passes through a filtering and rectifying circuit, the noise caused by external interference and affect can be filtered, and the power supply can be respectively transmitted to a current detecting socket and the input end of the current switching unit to be detected through a temperature sensor arranged on the current switching unit.

本实用新型为有关一种插座结构，尤指为设有零相位触发控制单元，可通过其光电感测元件来进行光耦合而产生零相位的触发，且可准确控制双向闸流阀在零相位的开启或者关闭，进而达到插置于输出插座上的电器装置从零相位开始启动或者关闭，以降低电磁干扰而延长电器装置使用寿命，且可提升电器装置的使用效率及节省电源，并通过电流转换单元于交流电源通过滤波整流电路进行滤波整流，可滤除外部所干扰影响的杂讯，并分别传送至电流侦测插座及电流转换单元的输入端，而可通过电流转换单元所设置的温度感应器来进行侦测，于电路温度升高时，温度感应器可进行切断双向闸流阀的电源输出而达到保护输出插座上所插设的电器设备。

Based on symmetrical analysis theory, the stator current of motor is decompounded into positive-sequence current, negative sequence current and zero-sequence current to distinguish the running state and fault type of the motor according to their magnitude of current. The technology of INTEL80C196KB MCU is applied to design and fulfill a new kind of micro-processor protective device for asynchronous motor.

根据对称分量分析原理，将电动机定子电流分解成正序、负序和零序分量，依据各种序量的大小，判别电动机运行状态和各种故障类型；采用INTEL80C196KB单片机技术，实现了一种新型的异步电动机综合保护装置。

Utilizing the sample data within 5ms after fault initiation and extending the date windows from 5ms to 10ms, the approximate current formula can be extracted from fault current or inrush current using least square fitting method. According to the curvature and convex-concave characteristic of the fitting curve, inrush current and fault current of power transformers can be distinguished.

该方法利用初始5ms内差电流的数据（5ms数据窗），将其拓展为长10ms的数据窗，然后通过最小二乘算法拟合差电流波形得到其近似表达式，再根据拟合曲线在各点处的曲率和凸凹特性来区分变压器励磁涌流和内部故障。

Circular electric current is a classical physical model. The researches on the magnetic field distribution characteristics of the circular current are helpful for the further study on magnetic characteristics of magnetic dielectric. The ellipse electric current is a typical physical model of ring-like electric current. The researches on the magnetic field distribution of it make us obtain more understandings of magnetic problem of ring-like electric current.

圆电流是一个经典的物理模型，对圆电流磁场分布特性的研究有助于进一步研究磁介质的磁性特征；而椭圆形电流又是环形电流中一个典型的物理模型，对椭圆形电流磁场分布情况的研究，将让我们进一步认识环形电流的磁场问题。

Since Al〓Ga〓In〓P possesses larger valence band difference to GaAs and wider energy gap, minor carrier reverse injection from base and space charge region recombination in the emitter are effectively suppressed in Al〓Ga〓 In〓P/GaAs HBT. Under most circumstances, quasi-neutral base recombination current dominates the base current, and its ratio to collector current varies little with collector current and temperature, thus greatly stabilizes the current gain.

Al〓Ga〓〓In〓P/GaAs HBT由于异质结的△Ev较大，发射区禁带较宽，有力地抑制了基区少子反向注入流和发射区空间电荷区复合电流；在大多数情况下，基极电流以准中性基区复合电流为主，其与集电极电流的比值随集电极电流和温度的变化极小，稳定了电流增益。

The relationships between welding pool width, wire extension and welding parameters including welding current duty ratio, base current, peak current, welding speed and wire-feeding speed were studied. Through large numbers of welding experiments, aluminum alloy pulsed MIG welding dynamic process were identified by the curve fitting method, and the mathematical models between welding current duty ratio, base current, welding speed, wire-feeding speed and wire extension were obtained, succeeding the model between the above parameters and weld pool width.

介绍了铝合金MIG焊焊接电流占空比、基值电流、峰值电流、焊接速度、送丝速度对熔宽的影响规律，并在其基础上，通过平板堆焊试验研究了这些参数对焊接干伸长的影响规律；在铝合金机器人脉冲MIG焊平板堆焊过程各焊接参数与正面熔宽之间的传递函数的基础上，采用铝合金平板堆焊阶跃试验，利用曲线拟合法辨识了铝合金机器人脉冲MIG焊动态过程传递函数，建立了焊接电流占空比、基值电流、焊接速度、送丝速度与焊接干伸长之间的对象数学模型。

When the system starts, the speed outer ring saturats non-functional, the current inner ring plays a major role to regulate the starting current to maintain the maximum so that the speed linear change, to reach a given value; when it operates steadily, the speed negative feedback from the outer ring plays a major role ,to let the speed changes with the given speed voltage , at the same time the current inner ring regulates the armature current of motor adjustment to balance the load current.

该系统起动时，转速外环饱和不起作用，电流内环起主要作用，调节起动电流保持最大值，使转速线性变化，迅速达到给定值；稳态运行时，转速负反馈外环起主要作用，使转速随转速给定电压的变化而变化，电流内环跟随转速外环调节电机的电枢电流以平衡负载电流。

The main research work of this dissertation is as follows: Based on the chemical reaction engineering theory and the nitrobenzene electroreduction mechanism, the plate and frame electrolyzer was designed and applied to the process of electroreduction nitrobenzene to p-aminophenol. This dissertation measured the residence time distribution data of the electrolyzer by means of the pulse response method and studied the rule of flow pattern along with the current capacity change. Under different conditions ,this dissertation studied the cyclic voltammetry properties of nitrobenzene on different electrodes by means of the dynamic cyclic voltammetry method and the electrode materials applied to the NB electroreduction have been selected primarily.Baseed on the results of cyclic voltammetry tests, this dissertation used p-electrode systems to measure the steady-state- polarization curves of nitrobenzene on different electrodes in H-type diaphragm cell, and obtained each primary factor s influence rule and the exchange current density value of each electrode.And then on the basis of the conclusions of fundamental researchs upword, the effects of influence factors on the the yield of p-aminophenol and the current efficiency,such as electrode material, current density, quantity of electricity circulated, nitrobenzene concentration . sulpuric acid concentration and so on, have been studied in detail in the systems of hign temperature , strong acidity and oxygen-poorthrough a series of electrolysis experiments in this paper.After all using Pb as anode Monel metal as cathode Dupont Nafion 417 cation-exchange membrane as membrane, this dissertation obtained the optimum technological condition: reaction temperature about 85C, current density 500A m-2, sulphuric acid concentration 20%wt.

论文的主要研究工作为：运用化学反应工程理论，结合硝基苯的电还原机理，设计出用于硝基苯直接电还原合成对氨基苯酚实验的板框式电解槽，并利用脉冲响应法测定了该板框式电解槽的停留时间分布数据，研究了流型随流量变化的规律；通过动态循环伏安法研究了硝基苯在不同电极上、不同条件下的循环伏安特性，初步评选出了用于硝基苯电还原的电极材料；结合循环伏安的测定结果，在H型隔膜电解槽中采用三电极体系测定了硝基苯在不同电极上、不同条件下的稳态极化曲线，得到了各主要因素的影响规律及硝基苯在各个电极上电还原的交换电流密度数值；在基础研究结论指导下，采用板框式电解槽，在高温、强酸、贫氧系统中，进行了一系列的电解实验，分别考察了电极材料、电流密度、通电量、硝基苯浓度、硫酸浓度等因素对收率及电流效率的影响，最终选择以蒙乃尔合金电极作为阴极、铅合金为阳极、Dupont Nofion 417阳离子交换膜为隔膜，得到由硝基苯直接电还原制对氨基苯酚的最佳电解工艺条件：反应温度85℃，电流密度500A·m~(-2)，硫酸浓度20％wt。

Another work of this paper is to study the continuous design of Test Automation. Common aspects of continuous design include the performance and maintainability of test automation system itself, the independence of test execution, and the analyzability of test result. This paper gives the concrete resolution of above four aspects, and also proposes other aspects need to be considered in continuous design, such as extendibility in future and capability to multi-product and multi-edition.

论文的另外一个工作是对自动化测试系统的可延续性设计进行了研究，从常见的自动化测试体系本身的性能、可维护性，测试执行的独立性以及测试结果的可分析性四个方面对可延续性设计提出了具体的实施方案，另外还提出了自动化测试在未来的可扩充性、对多产品多版本的适应性等可延续性设计需要考虑的问题。

The basic idea is to set a continuous solution of the region with a finite number of discrete points instead of a grid consisting of, these discrete points called grid nodes the solution of a continuous area on a given function of continuous variables used in the definition of discrete grid variable function approximation the original equation and boundary conditions in the micro-business operators to approximate differential, integral with the points and to approximate, so the original differential equations and boundary conditions are replaced by algebraic equations near Side, that is, finite difference equations , solve this equation group can get the original problem in discrete points on the approximate solution.

基本思想是把连续的定解区域用有限个离散点构成的网格来代替，这些离散点称作网格的节点；把连续定解区域上的连续变量的函数用在网格上定义的离散变量函数来近似；把原方程和定解条件中的微商用差商来近似，积分用积分和来近似，于是原微分方程和定解条件就近似地代之以代数方程组，即有限差分方程组，解此方程组就可以得到原问题在离散点上的近似解。

"Please accept this talisman as a token of our thanks."

请收下这个护身符以表达我们的感谢。

If I have that magic, I will be more acceptable in the society.

如果我拥有那种魔法，我将更加被这个社会所容纳。