查询词典 coating

Commonly used coating has guniting brushlelss coating, Business card printing and membership card making coating and glazing coater coating.

常用涂布方式有喷刷涂布、制卡和会员卡制作涂布和上光涂布机涂布三种。

The results show that the brush-plating coating is even and compact from section plane with good toughness and adhesion. The microhardness of the coating is 230.6HV0.5 which is 3 times of cast aluminium substrate. The wear resistance of the coating is 3 times of cast aluminium substrate. But the friction coefficient of the coating is 0.70 which is more high than that of the substrate, which is favorable for the fixed conjugate between the axis sheath and the axis seat of the gear-box.

结果表明，镀层厚度分布均匀、致密，镀层与基体界面清晰，未出现氧化物夹层，镀层的韧性和结合强度均较好；测得碱性铜及铸铝基体的显微硬度分别为230.6、74.2HV0.5；碱性铜的镀制使基体表面显微硬度及耐磨性均提高了2倍多，磨损状况明显改善。

A Si-HA coating was prepared on titanium by a biomimetic method. The surface of the Si-HA coating was porous, and there was coralloid gibbosity on the surface. Si concentration was descent in Si-HA coating from outside to inside. When the Si content increased, the coating became denser and thinner.

钛表面仿生制备的Si-HA涂层表面多孔，有珊瑚状凸起，涂层中的硅由内向外呈梯度分布；随着涂层平均含硅量增加，表面逐渐致密，涂层厚度减小。

When the surface of the coating is not gluey, you can smear new coating . To sprinkle the rough sand on the coating surface before the coating becomes sold, so that you can get a protection layer.

如需做保护层，可在涂料未固化前，在其表面上粗沙，可使保护层和防水层之间粘结牢固。

The effect of nano-diamond powder on the forming speed, microhardness and wear-resistance of compound brush plating Ni-P coating, the wear-resistance of brush plating Ni-P coating, Ni-P nano-diamond composite coating and Ni-P micro-diamond composite coating was tested. The mechanism of improving wear-resistance by of composite coating was analyzed.

中文摘要：研究了纳米金刚石粉对复合电刷镀镀层形成速率、显微硬度和耐磨性的影响；测试了在不同的热处理温度、载荷及金刚石粉含量下复合刷镀层的耐磨性能；分析了复合镀层的磨损机理。

They are are widely used in metal anticorrosive and defending coating, steel structure coating, rolling material coating, steel cylinder coating, printing coating, sealant, wood paint, ink, gloss oil and glass paint, etc.

产品广泛应用在金属防腐防护涂料、钢结构涂料、卷材卷钢涂料、钢桶涂料、织物印花涂料、封闭剂、木器漆、油墨、上光油、玻璃漆等领域。

The method for making the solar endothermic coating by using the nickel or nickel alloy hollow sphere as the absorbent adopts simple equipment and simple and feasible process; the prepared solar endothermic coating is a metal-resin type composite coating; the absorbent is nickel or nickel alloy powder with a hollow structure; a filling agent is made of macromolecule resin; the thickness of the coating is controlled between 10 and 100 mu m; the color of the coating is gray-black or black.

本发明采用的设备简单，工艺简单易行，所制备的太阳能吸热涂层为金属-树脂型复合涂层，吸收剂为具有空心结构的镍或镍合金粉末，填充剂为高分子树脂，涂层厚度控制在10～100μm，涂层颜色呈灰黑色或黑色。

Through above numerical analysis of the TiN coating/substrate system, some typical rules about the fatigue failure are found:(1) the fatigue damage of a coating/substrate system appears first on the interface, then expands along the interface and to the substrate, and finally causes the coatings broken and spalled;(2) under the cyclic loadings of tangential sliding and radial extrusion, the equivalent plastic damage on the interface is mainly generated by the shear stress and the accumulated plastic contributed by the increments of shear stress. Thus the change of the shear stress is the main factor for the contact fatigue damages of coating/substrate system;(3) the frictional coefficient, external loading and coating thickness have some influence on the carrying capacity and contact fatigue life for a coating/substrate system.

通过对TiN涂层／基体系统的数值模拟分析，得到了涂层／基体系统疲劳失效的一些典型规律：(1)、涂层基体的初始损伤首先出现在交界面处，然后沿界面并向基体中扩展，最后导致涂层断裂而发生剥落失效；(2)、在切向滑动和径向挤压循环载荷作用下，交界面处的塑性损伤主要是由剪应力τ产生，塑性累积也是由于△τ的变化引起，说明循环过程中剪应力变化是影响涂层接触疲劳破坏的主要因素；(3)、材料摩擦系数、外界载荷大小以及涂层厚度都对涂层／基体系统的承载能力以及疲劳寿命都有一定影响。

Our products include pet cages in wire series with powder coating, chrome coating, zinc coating, and other plastic coating, pet cages with powder coating, pet cages in metal pipe series and other relevant products such as dog cages, bird cages, cat cages, rabbit cages and hamster cages.

产品有：铁线类的电镀、喷塑的宠物笼；铁管类的喷塑宠物笼、塑料类宠物笼及其相关产品，包括狗笼、鸟笼、猫笼、兔笼等系列品种。本公司坚持&信誉至上，质量第一，双赢合作&为宗旨，欢迎国内外厂家、商家、来料或来样加工、生产，务求共同发展。

In this thesis, the research about surface modification of titanium alloy was carried on starting with improving stability of calcium phosphate biomedical coating by force of chemical treatment, Physical Vapor Deposition of titanium metal at high temperature and Electrophoresis Codeposition and sintering technology of the coating. By way of the studying of graded design of microstructure and composition of coating and EPCD and sintering technology, a systemic technology by which a calcium phosphate graded ceramic coating was prepared and sintered rapidly on the surface of a complex shaped product was obtainedand a high function titanium alloy/bioglass/hydroxyapatitegraded coating wasdeveloped.

本文从改善钛合金表面钙磷生物涂层的稳定性入手，采用化学处理、高温真空镀钛和电泳共沉积--烧结等技术对钛合金的表面进行了改性的研究，通过对涂层的结构和组成的梯度设计和EPCD--烧结技术的研究，获得了较系统的能在复杂形状的制品表面涂覆钙磷梯度涂层及其低温快速烧结技术，并研制出了高性能的钛合金／生物玻璃／羟基磷灰石梯度涂层。

Finally, according to market conditions and market products this article paper analyzes the trends in the development of camera technology, and designs a color night vision camera.

最后根据市场情况和市面上产品的情况分析了摄像机技术的发展趋势，并设计了一款彩色夜视摄像机。

Only person height weeds and the fierce looks stone idles were there.

只有半人深的荒草和龇牙咧嘴的神像。