查询词典 coating material

The protection coating, which has be used on graphite anode of calcium molten salt electrolysis, is developed. The fitting coating materials are SiO2, B2O3 and soluble glass.

借助扫描电镜、X-射线衍射等分析技术，通过实验研究出了合适的涂层材料，即SiO_2、B_2O_3，加入水玻璃做为粘结剂。

The results show that underlayer glaze is composed of glass phase, FAP and sphene crystals, and porous bioactive glass_ceramic coating is composed of glass phase, FAP and β-CaSiO3 crystals, a bone boning is gained between the composite coating and natural bone.

结果表明：底釉由玻璃相、FAP和榍石晶相组成﹔多孔生物玻璃陶瓷涂层由玻璃相、FAP和β-CaSiO3晶相组成﹔复合涂层能与骨组织产生骨性结合。

The results show that the electrodeposited calcium phosphate coating was converted to pure needle-like hydroxyapatite crystals in alkaline solution, the size of crystals become stout with the increase of current density and concentration of salts, the crystals structural was changed to squama structural with elevating the temperature of electrolyte, the volume of coating increase with the increase of quantity of electric charge.

结果表明：电沉积磷酸钙盐涂层经低温碱液处理后得到纯的羟基磷灰石涂层，羟基磷灰石晶体呈针状结构；随电流密度、主盐浓度的增加，晶粒变粗，随电解液温度的升高，晶体发生变化，出现鳞片状结构；涂层质量随沉积电量的增加而增大。

PU powder coating is a new kind of advanced powder coating.In this paper the manufacturing factors of squeezer are investigated by orthogonal experiment method.

粉末涂料及其涂装技术是十多年来在我国迅速发展起来的一项新品种、新工艺、新技术，具有许多溶剂型涂料无法比拟的优点。

The main reason for protect invalidation of coating is the disfigurements existing in the surface and interior of coating, which can be decreased by improvement of electroless nickel plating solution and strict control over technological parameters.

导致Ni-P层防护失效的主要原因来自于试样表面及镀层内部的缺陷，通过改进化学镀镍工艺配方和严格控制工艺参数能减少镀层缺陷的产生。

Although talc has been widely used in coating formulations in Europe, its application for coating purposes in Asia still awaits development.

虽然滑石粉应用在涂布配方，在欧洲已非常普遍，但是在亚洲地区的使用仍待开发。

The properties of TCC with ATS were as good as the TCC with HTS, better that the requirement of standard GB8744-88 for semi-graphitic carbon block. As good as TCC with HTS in industrial cells, the TCC with ATS also reduces the sodium penetration to cathodic lining, no tear-off of the coating was found after starting up of the cells. As compared with reference cells, the operation of coating cells with ATS was also improved to keep good shape of cell chamber, reduce the formation of sludge on the cell bottom, and gain more uniform current distribution. The ohmic drop of TCC cell bottom was lessened by 11. 5mV. The current efficiency was increased by about 1. 48% in average. It was estimated that the TCC life could be 44 months. Obviously, the TCC with ATS could also improve the performance of industrial cells, save energy, and increase the cell life.

对常温固化涂层槽的考核表明，与高温固化涂层槽一样，阴极内衬对钠的吸收减少，钠渗透速度减缓，从而减小钠膨胀危害，减少了铝电解槽早期破损的几率；启动后，常温固化涂层不脱落，同样具有良好的粘接性能；与对比槽相比较，常温固化涂层槽正常生产后，阴极表面干净、光洁，无沉淀或结壳，炉膛规整，阴极、阳极电流分布均匀，炉底压降降低（平均降低11.5mV），电流效率提高（平均提高1.48％）；涂层在电解槽内存在的时间可达到44个月以上；常温固化涂层同样可以起到改善电解槽工作状态、节能降耗、延长槽寿命的作用。

The properties of TCC with ATS were as good as the TCC with HTS, better that the requirement of standard GB8744-88 for semi-graphitic carbon block.AbstractAs good as TCC with HTS in industrial cells, the TCC with ATS also reduces the sodium penetration to cathodic lining, no tear-off of the coating was found after starting up of the cells.As compared with reference cells, the operation of coating cells with ATS was also improved to keep good shape of cell chamber, reduce the formation of sludge on the cell bottom, and gain more uniform current distribution. The ohmic drop of TCC cell bottom was lessened by ll.SmV. The current efficiency was increased by about 1 .48% in average. It was estimated that the TCC life could be 44 months.Obvi

对常温固化涂层槽的考核表明，与高温固化涂层槽一样，阴极内衬对钠的吸收减少，钠渗透速度减缓，从而减小钠膨胀危害，减少了博士学位论文摘要铝电解槽早期破损的几率；启动后，常温固化涂层不脱落，同样具有良好的粘接性能；与对比槽相比较，常温固化涂层槽正常生产后，阴极表面干净、光洁，无沉淀或结壳，炉膛规整，阴极、阳极电流分布均匀，炉底压降降低(平均降低11.smv)，电流效率提高(平均提高1.48%)；涂层在电解槽内存在的时间可达到44个月以上；常温固化涂层同样可以起到改善电解槽工作状态、节能降耗、延长槽寿命的作用。

A container (1) containing a coating composition the container comprising a container body (21) and a lid (7), the lid comprising a collar (11) and a disc (12), the container body having an opening provided with a screw-thread (5) cooperable with a screw-thread (6) on the collar and closeable by said lid characterised in that the disc is formed of polyethylene terephthalate which is sufficiently transparent to allow the coating composition to be visible therethrough.

一种容纳涂敷组合物的容器(1)，该容器包括容器主体(21)和盖子(7)，该盖子包括套环(11)和盘(12)，该容器主体具有一设置有螺纹(5)的开口(2)，该螺纹可与该套环上的螺纹(6)配合使用，并且该容器主体可由该盖子封闭，其特征在于，该盘由聚对苯二甲酸乙二醇酯形成，其足够透明以便使得透过该盖子可看到该涂敷组合物。

The coating on the metal is about is divided into 2 type: thermoplastic coatings and thermosetting resin coating.

金属上的涂层大约分为2种：热塑性涂层和热固性树脂涂层。

Liapunov—Schmidt method is one of the most important method in the bifurcation theory.

Liapunov—Schmidt方法是分叉理论的最重要方法之一。

Be courteous -- even when people are most discourteous to you .

要有礼貌──即使当別人对你最不礼貌的时候。