查询词典 coating machine

The phase structure of the ceramic-coating includes γ-Al2O3, AlPO4 and CoO. The forming process of the ceramic-coating includes iron movement, melting of surface layer, movement of electrolyte towards the melting-zone and the final nucleus-forming and sintering. The ceramic coating looks like islands and islets. The ceramic coating and the matrix are integrated metallurgically.

结果表明：该陶瓷膜层由γ-Al2O3， AlPO4和CoO等组成；通过对陶瓷膜层的表面形貌和显微结构观察及分析，发现陶瓷膜层形成过程是一个离子运动，表面层不断被击穿形成熔融区，处理体系中的电解质不断向熔融区运动、成核并迅速烧结的过程；陶瓷膜层呈现岛屿状；陶瓷膜层与基体之间为冶金结合。

The results show that antioxidation property of the modified phosphatic coating after oxidized for 30h at 700℃ is superior, weight loss percent of coating sample is only 1.76％. After thermal shock, i.e. for 3 min at 900℃ for 2 min at room temperature circulating about 30 times, for 3 min at 1100℃ for 2 min at room temperature circulating about 10 times, weight loss percent of coating sample is up to 1.97％, and coating don't slough off.

结果表明：在700 ℃氧化30 h后，改性磷酸盐涂料的防氧化性能优异，涂层试样的氧化失重率仅为1.76％，经过900 ℃、3 min 室温、2 min循环30次和1100 ℃、3 min 室温、2 min 循环10次连续热震后，涂层试样的失重率为1.97%。

To 700?. There are several advantages of this new system, including good crimp property, wide coating amplitude, fast coating speed, small straight deviation, firm and even coating. Thus, a newly reelable vacuum aluminium coating system was developed for the deep processing of agricultural and food products.

并具有卷取性能好、镀膜幅度宽、镀膜速度快、跑偏量小、镀膜层牢固、均匀等特点，为食品和农产品深加工提供了一种新型的卷绕蒸发式高真空镀膜机。

Secondly, by studying on the effect of metalized diamond on improving the composites bending strength, whose diamonds were coated by magnetron sputter Ti, Mo and TiN, electroless polyalloy Ni-Cr-P and Ni-W-P, molten salt coating Ti-Co-Cu, Cr-Ni-Cu and W-Cu-Co etc., some basic characteristics of ideal metalizing coating were presented. An original molten salt coating technology was also developed, and the coating equipment required is only a muffle oven and an alumina capsule, which is very suitable for tool factories in China.

其次，通过对磁控溅射镀Ti、Mo、TiN，化学镀Ni-Cr-P、Ni-W-P及熔盐沉积Ti-Co-Cu、Cr-Ni-Cu、W-Cu-Co等镀层对提高复合材料抗弯强度等方面的较系统的研究，提出了理想镀层应具备的几个基本特征；并针对我国金刚石工具厂家多、规模小的特点，创造性地开发出了一种不需要真空设备和保护气氛，只需要马弗炉和坩锅就可以进行镀膜的熔盐金属化技术。

It illuminated that the TiN coating enhanced the load bearing capacity, and enlarged the using range of substrate material. MoS2 coating and TiN+ MoS2 composite coating both possessed the good capability for palliating radial fretting damage. The microslip increased in radial fretting when the solid lubrication coating was used on the contact interfaces. More system energy can be absorbed in this process in favor of reducing vibration.

TiN 涂层明显提高了基体材料的承载能力，扩大了其应用范围； MoS2涂层和 TiN+ MoS2复合涂层具有较好的抗径向微动损伤能力；固体润滑涂层增加了径向微动界面的微滑，并可吸收更多的系统能量，有利于系统的减振。

The weight percentage for the components of the hyaline coating is as follows: SiO2 45 to 54 percent, B2O3 15 to 20 percent, one or more of Na2O, K2O and Li2O, 10 to 24 percent, one or more of TiO2, ZrO2 and ZnO, 6 to 18 percent , and the rest is one or more of CaO, MgO and CeO2. Firstly, the glass powder is mixed with the mill additions to be pulped and then plated on the surface of titanium or the titanium alloy. After being dried, the surface of titanium or the titanium alloy is directly used for a thermal hydrogen treatment or smelted at a temperature of 900 to 1, 000 DEG C for 15 to 30 minutes and then a hyaline coating with a thickness of 20 to 70 micrometers is formed on the surface of titanium or the titanium alloy; secondly, titanium or the titanium alloy plated with the coating is conducted a thermal hydrogen treatment. After the treatment technique is finished, the coating flakes off automatically in the process of cooling; and finally, a surface treatment is supplemented to meet the requirement of the workpiece surface.

该玻璃质涂层成分按重量百分比：45-54SiO2，15-20B2O3，10-24Na2O、K2O、Li2O中的一种或多种，6-18TiO2、ZrO2、ZnO中的一种或多种，余量CaO、MgO、CeO2一种或多种，将玻璃粉与磨加物混合制浆并涂覆在钛或钛合金表面，干燥后直接用于热氢处理，或在900-1000℃下熔烧15-30min，在钛或钛合金表面制得20-70微米玻璃质涂层，随后将制有该涂层的钛或钛合金置于氢气气氛下进行热氢处理，处理工艺结束后，涂层在冷却过程中自剥落，最后辅以表面处理即可满足工件表面要求。

In the coating, the nodular defect was observed to worsen severely the properties. For testing under oxidation condition, the nodular defect results in the internal oxidation of Al. No single Al oxide scale may be formed at 1100℃ owing to consumption of Al. Under hot corrosion, it becomes as short-path for diffusion of S through the coating, thus sulphuring the coating together with the substrate. During thermal shock testing, it may act as the source of cracking, and moreover, if cyclic stress applied, the cracks propagate toward the substrate, the thermal fatigue properties of coating will be worsened.

结果表明：在氧化条件下，缺陷导致Al的内氧化，在1100℃时，由于Al的大量内消耗，涂层表面已不能形成单一的氧化铝膜，使氧化性能下降；在热腐蚀条件下，缺陷成为硫向涂层中扩散的通道，导致涂层及基体的硫化；在冷热疲劳条件下，缺陷成为裂纹源，在交变应力作用下，裂纹向基体中扩展，降低了涂层的热疲劳性能。

B〓C coating possessed 4% of porosity, 12. 8Gpa of bonding strength, 28Gpa of microhardness, and its modulus is up to 230Gpa. It would provide a kind of coating material with excellent properties for many industrial fields.(2) The phase composition of B〓C coating was studied by XPS, XRD and EDS. It was found that: the oxidation activity energy of B〓C powder and coating is different, which is due to the difference of phase composition between them.

用XPS、XRD和EDX研究了碳化硼涂层的相组成，发现碳化硼粉末在涂层形成过程中不可避免的存在分解；比较了碳化硼涂层和粉末在高温下的氧化行为，发现涂层的氧化活化能比粉末要低，这是由于涂层和粉末相组成不同所造成的。

The effect of domestic GCC and clay on pre-coating coverage of the coated kraft liner board was studied. In order to optimize the second pre-coating, the effect of using TiO2 and using calcined clay to replace part of the TiO2 as the pigment on the coating coverage in the second pre-coating was also investigated.

研究了国产GCC、高岭土两种颜料及其不同组合对涂布牛皮卡纸预涂覆盖性的影响，并在此基础上，对二次预涂进行优化，研究了二次预涂中添加进口钛白粉及用国产煅烧高岭土部分代替进口钛白粉和高岭土对涂层覆盖性的影响。

Nanometer diamond composite coating drawing die, is a kind of completely new product which is deposited a composite coating of traditional diamond coating and nanometer diamond coating by CVD method on the surface of die hole (especially reduction angle and bearing ) of Tungsten Carbide drawing die and then be polished by mechanical means and plasma means.

纳米金刚石复合涂层拉拔模具，是以硬质合金为衬底，采用化学气相法在模具的内孔表面涂覆常规金刚石和纳米金刚石复合涂层，并对涂层进行研磨抛光后得到的一种全新产品。

Liapunov—Schmidt method is one of the most important method in the bifurcation theory.

Liapunov—Schmidt方法是分叉理论的最重要方法之一。

Be courteous -- even when people are most discourteous to you .

要有礼貌──即使当別人对你最不礼貌的时候。