查询词典 cladding

Results have theoretical significance to the design and optimization of cladding parts and to more applications of the cermet cladding material.

文中的研究结果对金属陶瓷硬质覆层零件的设计、优化以及金属陶瓷硬质覆层材料的进一步推广应用具有重要的理论指导意义。

The effect of cladding material, When detected object has cladding material, take note of the changing of detection distance.

则不能检测。。镀层的影响检测物体具有镀层时，请注意其检测中离就变了。

There is bunchiness Eutectic under the cladding layer, there is lots of black block and columniation crystal structure, in the middle part of the cladding layer.

熔覆层底部近结合区呈束团状的共晶组织，熔覆层中部区域有大量的黑灰色的块状和柱状晶组织，整个熔覆区还存在着大量灰白色的条块状组织。

Cladding field has been constructed by using the accurate functional form with two approximate parameters:the transverse decay constant in the cladding and the field value at core-cladding interface,which are already known.

包层场用修正贝塞尔函数以及已经求得的两个参量：包层径向衰减常量和场在纤芯-包层界面上的值重新构建。

In order to reach the purpose of using pre-laser cladding method preparation of Ni-based amorphous alloy coatings on 45 steel substrate surface by the method was carried out. The principles of the three clusters and the amorphous line of the law of composition rules were used. The Ni59.35Nb34.45Sn6.2 alloying powder which has a great glass-forming ability in conventional preparation methods of amorphous alloys was chosen. In the protection of atmosphere, the amorphous surface coating was prepared. The microstructure, micro-hardness and performance of the different output power of the laser cladding were analyzed.

中文摘要：为了达到研究预置激光熔覆可以在45钢上制备Ni基非晶合金涂层的目的，采用非晶形成能力三判据原则及非晶成分团簇线定律法则，选择了采用常规非晶合金制备方法中具有极大玻璃形成能力的Ni59.35Nb34.45Sn6.2合金粉末，在保护气氛下，制备非晶涂层，并对不同输出功率下得到的涂层进行微观组织和结构表征及性能测试。

The results prove that using the laser power P=1.7Kw, scanning velocity V=4mm/s, spot diameter D=3mm, cladding thickness T=0.6mm, 50%: 50% Ni60:Ni-Cr-Cr_3C_2 as laser cladding process can obtain the laser coating with lubricous tight surface, tiny dilution rate ,fining microstructure and higher micro hardness and fine metallurgical-bonding Interface.

试验结果最终证明，激光熔覆工艺参数对熔覆层的宏观形貌、微观组织及涂层性能有极大的影响，在激光熔覆工艺参数为功率P=7Kw，速度Vs=5mm/S光斑直径D=3mm，厚度T=0.6mm，50%；50%的Ni60；Ni-Cr-Cr_3C_2的条件下，所得到熔覆层表面光滑致密、组织细小均匀、稀释率小、硬度高且与基体实现了良好的冶金结合，证明这种方法是一种在提高热锻模寿命方面有前途的方法。

Optical film cladding The improvement upon the mirror surficial qualities after film cladding was discussed.

加工实例最后，简要介绍了有效口径为480×280mm的船形碳化硅质平面反射镜的数控光学加工和检测。

We got the simple and high accurate eigenvalue equations and cutoff frequency formulae of all propagation modes. Second, to the optical fiber with homogeneous cladding, we defined the "permittivity ratio", and we got the simple and high accurate connection of cutoff frequency to the ratio. Third, to the fiber with inhomogeneous cladding, we analyzed the dispersive and power-frequency characteristics.

第二，对于具有各向同性包层的弱渐变光纤，引入了介电比，找到了精度高且形式简洁的截止频率对折射率参数的依赖关系；第三，对于具有各向异性包层的弱渐变光纤，首次通过包层的轴向与横向的介电常数比分析了该类光纤的色散和功率特性。

The invention also relates to a device comprising at least one one-way detection unit constituted by a pressure sensor disposed outside the cladding and connected to the inside the cladding via a horn-shaped duct which slopes relative to the axis of the cladding, which has its mouth opening out in the cladding, and which has its tip connected to the pressure sensor.

还公开了一种装置，包括由压力传感器（14，15）构成的单向探测单元，压力传感器设在包层（11）的外面，并通过牛角形的导管（12，13）与包层（11）内部连接，导管相对于包层（11）的轴线倾斜，并有开口进入包层（11），导管的顶部与压力传感器（14，15）连接。

The laser cladding technology on the surface of 35 steel with Ni-based self-fluxing alloy is studied. On the base of its microstructure and property of wear resistance, the cladding technology is greatly improved than that of the flame. By the studies of microstructure, mechanical property and corrosion resistance, the cladding layer with different amount of WC particle in Ni matrix is obtained.

试验针对抽油泵柱塞表面进行研究，在35 钢表面激光熔覆镍基自熔合金，通过改变工艺参数，观察并测定熔覆层的组织结构及其腐蚀、磨损性能，并与火焰喷焊工艺进行性能比较，优化工艺参数，研究结果具有实际意义。

It has been put forward that there exists single Ball point and double Ball points on the symmetrical connecting-rod curves of equilateral mechanisms.

从鲍尔点的形成原理出发，分析对称连杆曲线上鲍尔点的产生条件，提出等边机构的对称连杆曲线上有单鲍尔点和双鲍尔点。

The factory affiliated to the Group primarily manufactures multiple-purpose pincers, baking kits, knives, scissors, kitchenware, gardening tools and beauty care kits as well as other hardware tools, the annual production value of which reaches US$ 30 million dollars.

集团所属工厂主要生产多用钳、烤具、刀具、剪刀、厨具、花园工具、美容套等五金产品，年生产总值3000万美元，产品价廉物美、选料上乘、质量保证，深受国内外客户的青睐