查询词典 butadiene

It is manufactured through kneading, cold pressing and post-treatment; and the materials for the synthetic brake shoe include butadiene-acrylonitrile rubber, phenolic resin, graphite, iron powder, barium sulfate, potash feldspar powder, composite fiber, sulfur, hexamethine tertramine, polymethylene aniline, 2-mercaptan benzothiazole, zinc oxide and toluene.

同时本发明的提供了采用捏合、冷压、后处理工艺来制造新型高摩擦系数合成闸瓦。组成新型高摩擦系数合成闸瓦的各组分重量百分比如下：丁腈橡胶为6.20％，酚醛树脂为10.00％，石墨为15.00％，铁粉为11.03％，硫酸钡为30.00％，钾长石粉为5.00％，复合纤维为20.20％，硫磺为1.00％，六次甲基四胺为1.00％，聚亚甲基聚苯胺0.12％，2-硫醇基苯并噻唑0.15％，氧化锌0.30％，甲苯8.0％。

The eight VOCs were acetophenone, phenol, benzotrichloride, 1, 3-butadiene, chlorobenzene, methanol, methyl chloroform and methylene chloride. They were mixed together with very low concentrations.

所测定的八种VOCs为苯乙酮，苯酚，三氯甲苯，1，3丁二烯，氯苯，甲醇，三氯代乙烷和二氯甲烷。

Mineral Oil, Hydrogenated Styrene/Butadiene Copolymer, Bertholletia Excelsa Seed Oil, Prunus Amygdalus Dulcis Oil, Fragrance.

矿物油，氢化苯乙烯/丁二烯共聚物， Bertholletia棕竹籽油，李野枣石油，香气。

A process for the carbonylation of allylic butenyl ether (for example, methyl crotyl ether, 3-methoxybutene-1 and mixtures thereof) or mixture of butadiene and alcohol and production of beta-gamma unsaturated carboxylic acid esters (for example, methyl-3-pentenoate) utilizing a rhodium-containing catalyst for example, dicarbonylacetylacetonate rhodium(I or the like promoted with an iodide-containing compound (for example, HI, AlI3, SnI4, TiI4, CrI3, and CoI2 or the like).

一种将烯丙型丁烯基醚(如甲基巴豆基醚、3－甲氧基丁烯－1及其混合物)或者丁二烯与醇的混合物羰基化的方法，以及由含碘化物化合物(如HI、AlI3、SnI4、TiI4、CrI3和CoI2或等效物)促进，用含铑催化剂如二羰基乙酰丙酮酸铑(I或其等效物制备β－γ不饱和羧酸酯(如甲基－3－戊烯酸酯)的方法。

Compared with the Epoxy resorcinol-formaldehyde resin pretreatment system and Maleic anhydride pretreatment system developed by Xusigui, the 40% carbolated styrene-butadiene latex system can keep the composite"s properties and reduce the cost of pretreatment and simplify the pretreatment technology; especially to the HST 2073 latex system, the composite"s mechanics properties are improved greatly. Secondly, the composite"s comprehensive properties and interface performance are improved by reinforced with short fiber grafted with rubber in the surface. Thirdly, to simplify the production technology of composite, we add TKM-M and RF-90 as adhesive agent to the composite blended in an internal mixer, so as to the composite can be used to industry widely, then the effect of the amount adhesive agent on the composite"s properties and interface adhesive performance was studied, from the experiments the optimum amount of adhesive agent was deduced.

其中采用特软羧基丁苯胶乳预处理短纤维的方案，降低了预处理成本，相对许泗贵的低分子环氧和马来酸酐体系来说，预处理工艺大大简化了，而材料的力学性能保持良好，尤其是 HST 2073A 胶乳预处理体系，力学性能有较大幅度的提高；第二，通过对尼龙短纤维表面进行接枝橡胶分子链预处理，改善了复合材料的界面粘合性能，复合材料的综合性能也得到了相应的提高；第三，为了简化复合材料的生产工艺，使复合材料的应用得到工业化推广，我们选用TKM—M和RF—90长效增粘剂，直接加入短纤维橡胶复合材料中，采用密炼工艺，探讨了增粘剂的用量对复合材料界面粘合以及性能的影响，得出了增粘剂在复合材料中的最佳用量。

Carboxy styrene-butadiene rubber/sodium based clay composites were prepared by emulsion intercalation, the microstructure of the composites was characterized by X-ray diffraction, and the mechanical properties and dynamic mechanical properties of the composites were studied.

用乳液插层法制备了羧基丁苯橡胶／钠基黏土(XSBR/Na-clay)复合材料，用小角X射线衍射仪对其微观结构进行了表征，并对其动态力学性能和力学性能进行了研究。

In this paper, grafting of crotonic acid, undecylenic acid, oleic acid, and acrylic acid onto acrylonitrile-butadiene-styrene terpolymer were studied. Experimental factors influencing grafting, kinetics and mechanism of grafting, the reactivity of grafted polymer, and the compatibilization effects of grafted ABS on ABS blends were investigated.

本文主要研究反式丁烯酸、10-十一烯酸、油酸、丙烯酸接枝ABS树脂的影响因素、接枝反应机理和动力学、接枝物的反应活性，以及接枝物对ABS共混物的增容作用。

Good thermal stability, High mechanical strength.Used as catalyst or catalyst carrier in the manufacturing of the important industrial products, such as cyanuramide, benzene anhydride, maleic acid anhydride, butadiene rubber, acrylic nitrite, etc.

用途：本产品在三聚氰胺、苯酐、顺丁烯二酸酐、顺丁橡胶、丙烯腈等重要工业品生产中用作催化剂及催化剂载体，也广泛用于石化产品的精制脱除芳烃，也可用于有机气体、液体的选择性吸附分离及离子交换脱除水中多价有害元素等。

The major products were methane, ethylene, propylene, butylene, butadiene, cyclopentadiene, benzene, toluene, styrene, vinyl-substituted cyclopentene derivatives and C5/C6 isomers (pentadiene, methyl-substituted cyclopentene derivatives, cyclohexene, hexadiene and methyl-substituted cyclopentadiene derivatives), and the main primary products were determined to be C1～C4 compounds, cyclopentadiene, benzene, toluene and vinyl-substituted cyclopentene derivatives.

热裂解主要产物为甲烷、乙烯、丙烯、丁烯、丁二烯、环戊二烯、苯、甲苯、苯乙烯、环戊烯的乙烯基取代物及C5， C6异构体(戊二烯、环戊烯的甲基取代物、环己烯、己二烯和环戊二烯甲基取代物)，其中， C1～C4、环戊二烯、苯、甲苯、乙烯基取代环戊烯为初始产物。

The major products were methane, ethylene, propylene, butylene, butadiene, cyclopentadiene, benzene, toluene, styrene, vinyl-substituted cyclopentene derivatives and C5/C6 isomers pentadiene, met...

热裂解主要产物为甲烷、乙烯、丙烯、丁烯、丁二烯、环戊二烯、苯、甲苯、苯乙烯、环戊烯的乙烯基取代物及C5，C6异构体(戊二烯、环戊烯的甲基取代物、环己烯、己二烯和环戊二烯甲基取代物)，其中，C1～C4、环戊二烯、苯、甲苯、乙烯基取代环戊烯为初始产物。

The concept of equivalent rotationally rigidity is offered and the formula of rotationally rigidity is obtained.

主要做了如下几个方面的工作：对伸臂位于顶部的单层框架—筒体模型进行分析，提出了等效转动约束的概念和转动约束刚度的表达式。

Male cats normally do not need aftercare with the exception of the night after the anesthetic.

男猫通常不需要善后除了晚上的麻醉。