查询词典 be on the way

It's either this or that way, it's one way or the other. it should be one direction, it could be on reflection.

它或是这条，或是那条路，它是一条路，或是其他，它应该是一个方向，它可能只是镜象。

The socket structure is provided with a zero phase trigger control unit, through the photoelectric sensing element of the unit, optical coupling can be performed to generate zero phase trigger, and the opening or the closing of a two-way thyratron in the zero phase can be accurately controlled, therefore, an electric device inserted on an output socket can be started or stopped from the zero phase, in order to reduce the electromagnetic interference and prolong the service life of the electric device, the use efficiency of the electric device can be enhanced, the power supply thereof can be saved, filtering and rectifying can be performed through a current switching unit when the alternating current power supply passes through a filtering and rectifying circuit, the noise caused by external interference and affect can be filtered, and the power supply can be respectively transmitted to a current detecting socket and the input end of the current switching unit to be detected through a temperature sensor arranged on the current switching unit.

本实用新型为有关一种插座结构，尤指为设有零相位触发控制单元，可通过其光电感测元件来进行光耦合而产生零相位的触发，且可准确控制双向闸流阀在零相位的开启或者关闭，进而达到插置于输出插座上的电器装置从零相位开始启动或者关闭，以降低电磁干扰而延长电器装置使用寿命，且可提升电器装置的使用效率及节省电源，并通过电流转换单元于交流电源通过滤波整流电路进行滤波整流，可滤除外部所干扰影响的杂讯，并分别传送至电流侦测插座及电流转换单元的输入端，而可通过电流转换单元所设置的温度感应器来进行侦测，于电路温度升高时，温度感应器可进行切断双向闸流阀的电源输出而达到保护输出插座上所插设的电器设备。

In chapter 1, an up to now synthetically evaluation is given on the research ways and conclusions about jet in cross-flow. Considering the shortage of previous research ways and techniques (the instantaneous flow field and vortices field can not be properly get), in addition to the deficiency of corresponding conclusion (mainly concentrate on the analysis of time-average but little on structures of flow and action of vortex), the research way and content is draft out in this part. Though PIV, the time-average, instantaneous flow field and vortices field can be get, that will unveil the coherent vortex and its course of generation, development and evolvement, with the assistance of K-ε model and Hybrid Finite Analytic Method , which will proof-test the experiment result and bring some complementary, more profound research about the 3-D characters can be done. Using some fundamental topological theory and principle on flow analysis, with anglicizing of vortex structure, a reasonable description is the topological characteristic of near field in JICF given.

首先在第一章中对横流中湍射流的以往研究方法和研究成果给予了综合的评述，针对横流中湍射流旋涡结构以往研究中研究方法的局限性（不能很好得到流动的瞬态流场及涡量场）和相应研究成果中存在的不足（大都集中在时均特性的分析，对流动的内部结构和旋涡的运动阐述很少），明确了本文的研究方法和研究内容：通过PIV流动测量显示技术得到流动的时均及瞬态流场、涡量场，来揭示横流中湍射流的时均、瞬态流场、涡量分布特性，和各种具有拟序结构性质的复杂涡系的产生、发展及演化过程；结合湍流k-ε双方程模型及相应的HFAM计算方法，对于实验进行相互验证和补充，从而更为充分地研究各种旋涡的三维特性；利用拓扑分析的一些基本原理及相关规则，依据对各种旋涡结构的分析，做出对射流近区流场拓扑性质的合理描述。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Everyone is on their own ways, in a sudden understanding of myself, in a sudden understanding my ideal, I insisted on a turn, and I firmly believe that after the mud would be the blue sea,but there was distruped emotion overwhelmed, I just want to try to forgive, as far as possible, I just want to forget , as far as possible, and then naturally to make myself, but today I am really in so bad situation, I have no reason to happy, no way ,anything is on no way, To see a movie or eating and drinking out of the consumption to eacape from the unrational mind ,can I?

每个人都有自己要走的路，在突然间了解了自己，在突然间理解了自己的追求，于是我坚持了转弯，而我坚信泥泞的小路过后一定是蔚蓝的大海，可是总有被扰乱的心情，不知所措中，我只想尽量去宽恕，尽量让自己不受影响，尽量让自己高兴，但是今天的我真的好伤心，今天的我没有办法去理智，我只想轻轻松松的去看场电影或者大吃大喝的消耗掉现在无法理智的头脑，可以吗？

Uses the automated control not only on the galvanization production line to be possible to raise the product manufacturing efficiency and to reduce worker's labor intensity, and has the very good economic efficiency and the social efficiency, galvanizes on the production line to be possible to realize the automated control using PLC, PLC has the reliability to be high, the compatibility is broad, has the correspondence function, the structure modulation characteristic, therefore how to use good PLC to become the galvanization production line automation control key, auxiliary to galvanized the automatic production line driving with PLC by the frequency changer to carry on the automatic control, had the structure to be simple, the programming was convenient, the operation was flexible, the use safe, worked stable, the perform reliably and the antijamming ability strong characteristic, was one kind of very effective automatic controlThe way, is galvanizes the production to realize, the low cost, the high grade automated production development direction highly effective.

在电镀生产线上采用自动化控制不但可以提高产品生产效率和减轻工人的劳动强度，而且有着非常好的经济效益和社会效益，电镀生产线上运用PLC则可以实现自动化控制，PLC具有可靠性高，适应性广，具有通信功能，结构模块化的特点，因此如何使用好PLC成了电镀生产线自动化控制的关键，用PLC辅以变频器对电镀自动生产线行车进行自动控制，具有结构简单、编程方便、操作灵活、使用安全、工作稳定、性能可靠和抗干扰能力强的特点，是一种很有效的自动控制方式，是电镀生产实现高效、低成本、高质量自动化生产的发展方向。

Considering the influence of other loads and uncertain factors, the follows should be taken into account if the bridge erecting mode is continue to be used.(1) Strengthen beams of steel structure with orbits, especially second half part of the Bere Beam;(2) Altering the space between crossties and increasing the support in the mid of station weight beam both can enlarge the decentralization function of the load carrying on the trunk beam, but usually the latter way is more effective. When the latter way is chosen, the stiffness of the support should be diminished correspondingly. Furthermore, adjusting the height of the support would help a lot in dispersing load.

考虑到其它载荷的影响以及不可预测因素，如继续使用该类架桥方式，应做以下考虑：(1)增加钢架梁与轨道的支撑，特别是在贝雷梁的后半部分；(2)增大荷载作用在箱梁上的分散系数，可适当改变枕木间距，亦可在配重梁的中部增加支撑，后者效果会更有效，当考虑增加支撑时，同时要降低支撑的刚度，支撑如能简单地调整高度，将会对分散载荷起到非常大的帮助。

In the "name" for the rules to be added to enter a descriptive name;"category" in the categories of rules can be specified, we choose to "application"; in the "operation" select "Allow";" the direction of "rule is applied to the designated receiving or sending, or two-way transmission of data, we here select the" two-way "this value, so that the local data packets received or sent;" Data Link "and select" WAN ";" agreement "designated Rules of the communication protocol used, select "TCP"; in the "Description" column is filled to the rule description, click on the "Edit" button, pop-up "the rules of that edit box" to fill in the text box that can simply fill in the content of the rules will be set up interface in the "Rule Description" display.

在&名称&中为待添加的规则输入一个描述性的名称；&类别&中可指定规则的类别，我们选择&应用程序&；在&操作&中选择&允许&；&方向&是指定规则是应用于接收，还是发送，或者双向传输数据，我们这里选择&双向&这个值，让本机接收或发送数据包；&数据链&中选择&广域网&；&协议&指定规则使用的通信协议，请选择&TCP&；在&说明&一栏中，是填写的对该条规则的说明，可点击&编辑&按钮，弹出&规则说明编辑框&在文本框中填写说明即可，所填写的内容将会在规则设置界面的&规则描述&中显示。

It is applied as the basic features of make-up soil to create a wealth of decorative techniques, that is, all kinds of colored glaze decoration, depiction of flowers, pick flowers, and white flowers, white painted underglazed designated flower, and red and green color, low-lead three-color glaze and white printing, printing and so on more than 30 kinds of celadon; techniques in particular rust spent five kilns broke through the limitations of single-colored glaze, with the artistic effect of traditional ink painting and traditional Chinese painting, calligraphy, art and porcelain technology combine to create a new integrated arts, explore the ancient ceramics of the new realm of aesthetics; for the future and colorful blue and white porcelain had paved the way for development.ci zhou yao decorative themes are rich and varied, unique, artist have a very cool way, and masterly skills of painting, will be pleased to see civilyu chong bird, rare birds andrui shou , landscape character, opera stories, poems Qu Fu,min yan motto, children at play Zaju painted on porcelain, etc., to retain a large number of ancient folk painting, calligraphy and folk customs reflect the kind of information, forming a simple, free and easy, a crisp, Haofang's artistic style and rich color and a distinctive non-governmental national characteristics, and the world at large on the domestic ceramics have had a profound impact.

它以施用化妆土为基本特征，创造了丰富的装饰技法，即有各类色釉装饰、刻划花、剔花、白地黑花、白地釉下绘划花，又有红绿彩、低温铅釉三彩和印花白瓷、印花青瓷等三十多种；尤其是铁锈花技法突破了五大官窑单色釉的局限，具有传统水墨画的艺术效果并把中国的传统绘画、书法技艺与制瓷工艺结合起来，创造了新的综合艺术，开拓了古代陶瓷美学的新境界；为以后青花和五彩瓷器的发展开辟了道路。磁州窑的装饰题材丰富多彩，别具一格，画师们以极其潇洒的手法和高妙的画技，将民间喜闻乐见的花鸟鱼虫、珍禽瑞兽、山水人物、戏曲故事、诗词曲赋、格言民谚、婴戏杂剧等绘于瓷器，保留了大量古代民间绘画、书法及反映民俗民风的实物资料，形成了质朴、洒脱、明快、豪放的艺术风格及浓郁的民间色彩和鲜明的民族特色，对国内乃至世界陶瓷产生了深远的影响。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。