查询词典 as follows

Some basic properties of σ- LFSR over F4 are studied, such as nonlinearity, cycle structure distribution of state graph, the largest period and counting problem related. The conclusions are as follows:The coefficient ring of σ-LFSR is isomorphic to the matrix ring over F,. The cycle structure of σ- LFSR is consistent with that of the determinant of the corresponding polynomial matrix if and only if the feedback polynomial of - LFSR does not contain nontrivial factor over F2,. The counting formula of the number of σ- LFSR with inconsistent cycle structure is also showed in that part. The period of σ-LFSR with degree n is maximum if and only if the determinant of the corresponding polynomial matrix is the primitive polynomial with order 2n over F2,.

本文研究了有限域F_4上的σ-LFSR的一些基本性质，如非奇异性、状态图的圈结构的分布、最大圈的充要条件及相关的计数问题等，得到以下结论：σ-LFSR的系数环同构于F_2上的矩阵环；σ-LFSR的状态图的圈结构与对应的多项式矩阵的行列式的圈结构一致的充要条件为σ-LFSR的反馈多项式不含有非平凡的F_2上的因式，给出了圈结构不一致的σ-LFSR的计数公式； n次σ-LFSR周期达到最大，当且仅当对应多项式矩阵的行列式为F_2上的2n次本原多项式。

This problem can be modeled as a combinatorial optimization problem as follows.

这一问题可以归结为一个组合优化问题如下。

The thesis also draw several conclusions as follows:(1) Orthogonal experiment design method can be viewed as a special case of genetic algorithm, i. e. a genetic algorithm with a fixed initial population, an oriented-mutation operator and one evolution epoch.(2) In terms of running steps, genetic algorithm is more complex than orthogonal experiment design method.

论文首次对正交试验设计法和遗传算法这两种独立发展起来的方法进行比较研究，提出(1)正交试验设计法是遗传算法的一种特例，即是一种初始种群固定的、只使用定向变异算子的、只进化一代的遗传算法；(2)遗传算法产生的优化解优于正交试验设计法产生的优化解，且遗传算法处理交互作用项的效率高于正交试验设计法；(3)遗传算法的步骤比正交试验设计法复杂，所需的试验次数也要多。

The findings are as follows. First of all, male cosmeticians connect masculinity and profession for promotion by interaction and cosmetic teaching with customer. According to different situations, theyconstruct masculinity and waver between femininity and masculinity. Moreover, their bodies are the practice fields to display their images by keeping a distance from customers to draw the distinctly sexual line and refusing make up for getting rid of the stigmas, such as feminine or sissy. Last but not least, male cosmeticians escape from emotional labor that connected with female closely. Meanwhile, their "backstage" life with the coworkers is the way to adjust their working emotions.Key words: cosmetician, physical labor, emotional labor, masculinity, men's study

在分析各项资料后，可归纳出以下几点研究发现：首先，男性彩妆师透过平日与顾客的互动以及彩妆活动的教学，展现男性与专业性的连结以促进销售业绩，也将「专业性」与女性脱钩；同时，他们会视不同情境，建构阳刚特质，并动态地游移在阴柔／阳刚特质两者之间；其次，身体本身会成为展现男性彩妆师形象的实践场域，他们同时透过与顾客保持接触的距离，刻划出性别界线，但他们自身也会排拒化妆，以挣脱女性化的标签或娘娘腔的污名；最后，男性彩妆师跳脱男性不被期待从事情绪工作的藩篱，而与同事相处的「后台」生活，是调节工作情绪的方式。

Main results obtained are as follows:(1) Morphological diversities among/within populations were discussed by analyzing characters such as apical bud, leaf, acorn and cupule.

主要结果如下：(1)表型多样性的研究结果：表型性状的方差分析表明蒙古栎种内表型性状在群体间和群体内差异都极显著(α=0.01)。

Detailed studies are made as follows: Searching the key internal factors which can affects slope stability. According to the geological data which was gained by exploration investigation, establishing a geological model which can reflect rock mass characteristics;With analyzing the internal and exterior factors synthetically, the deformation and possible failure mechanism and mode of the cut slopes was confirmed which combines with stereoic projection and other techniques;The stabilities of the 14 high slopes are estimated synthetically by applicable design codes and guidelines. With the estimate result and some other analysis methods, the rock mass mechanical parameters of slope are identified;As a results, 14 high slopes fall into 4 categories based on rockmass characteristics and discontinuities. The stability and deformation of some typical slopes was analyzed with distinct element method by UDEC;The safety factor of some dangerous slopes are calculated by rigid limiting equilibrium method for coMParison.

首先着重研究影响边坡稳定性的内在因素，主要是通过地质勘探、测量、现场观测等手段取得研究区地质体的基础地质资料，建立起能够反映地质体结构特征的地质模型；随后综合分析潜在的内外部影响因素，并结合赤平投影对边坡可能的失稳模式或破坏机制作出判断；运用已有岩体质量分类方法对沿线14个高陡边坡稳定性进行初步的评价，并结合试验研究、经验判断、工程类比等手段确定了坡体的岩体力学参数；根据稳定性初步评价结果将研究区14个高陡边坡按开挖方式分为4大类，并利用离散元程序UDEC对各类典型高陡边坡进行了稳定性计算分析；对潜在危险边坡利用刚体极限平衡法求出了不同工况下的安全系数。

In this paper the rheological characteristics of CWM (coal-water mixture)-fuel oil mixture as an alternative to fuel oil for diesel engines are investigated and explained as follows:( 1 )The rheological model of CWM-fuel oil mixture s and its parameters.

本文将就下列三方面对超细煤木浆与柴油组成的混合液的流变特性进行分析：(1)流变模型和流变参量；(2)超细煤水浆与柴油的最佳混合比；(3)触变性。

The effect of tribology factors on bearing vibration is studied experimentally. AR model and WPT are used to processing the normal arid abnormal signals. The results are as follows:1. The vibration of ball bearings is caused by the tribology action of contact pairs of ball and ring races and has the essential of tribo-dynamics. Any factors affecting the tribology characteristics of contact pairs will affect vibration and noise of bearings consequently.2. Vibration characteristics of bearing keep almostly unchanged with the increasing of axial load expecting the increasing of nature frequencies. When radial load increasing with axial load unchanged, nature frequencies keep unchanged but some new vibration peaks appears in the spectrum.3. Vibration amplitudes are damped and nature frequency are enhanced with sufficient lubrication. Vibration and noise of bearings increase obviously and roar can happen and the contact surfaces scratch slightly under insufficient and unclean lubrication state. Bearing will be disabled in a few minutes without any lubrication.4. Bearing vibration is unstable under low speed. With the speed increasing, the vibration become stable and natural frequencies increase slightly but the amplitudes increase apparently.5. Bearing vibration can be excited only by some harmonics ofwaviness without lubrication and by all harmonics with lubrication based on the theoretical analysis.6. The nature frequencies of ball bearings decrease with the increasing sizes. When international clearance increasing, nature frequencies decrease in radial and increase in axial and angular and the amplitudes increase in radial and decrease in axial and angular. When the number of balls increasing, nature frequencies increase and amplitudes decrease. When the pitch diameter increasing, axial nature frequency increase and others nearly keep no change. When outer race groove curvature radius increasing, nature frequencies increase in radial and decrease in axial and angular and amplitudes keep no change in radial and increase in axial and angular. When inner race groove curvature radius increasing, nature frequencies decrease and amplitudes increase.7. The distortion in amplitude and frequency components of bearing vibration signals picked up by the present probe measurement method is founded and right conclusions cannot be achieved by the signals. When accelerometer is rigidly screwed with steel stud onto a flat outer surface of a ball bearing, vibration signal can be got without distortion and the reliability of research on bearing vibration is assured.8. AR model is suitable for large samples of bearing vibration signals, square root of length of samples can be used as the upper limitation of order determination and the FPE order selection criterion is effective. Many advantages of AR spectrum are founded over the classical based on FFT.9. Time-Frequency analysis is necessary for abnormal noise of ball bearings. WPT overcomes the principle shortcomings of STFT and proved to be a best tool to process the abnormal signals.

理论分析和试验研究表明： 1球轴承振动是钢球—滚道接触副中的各种摩擦学作用引起的，具有摩擦动力学的本质，任何对接触副的摩擦学特性有影响的因素都将对球轴承的振动和噪声特性产生影响； 2中心轴向载荷作用下，载荷增大使球轴承的固有振动频率升高，载荷越大同样的载荷增幅引起的频率升幅减小，足够大的中心轴向载荷作用下载荷的变化对球轴承振动的频率特性不会产生明显的影响； 3轴向和径向联合载荷作用下，径向载荷不大时球轴承振动的固有频率基本不变，但是可能引起变刚度激励的非线性振动，出现新的频峰，过大的径向载荷将使部分钢球脱离接触，使球轴承的振动和噪声呈现不稳定状态； 4润滑对球轴承的振动和噪声特性有重要的影响，良好的润滑对振动有明显的抑制作用，润滑不充分时，振动和噪声的水平会有明显增高，一定条件下还会激发接触副中的谐振，发出啸声，造成接触表面的伤害，无润滑干接触时，短时的运转就会损伤接触副表面，使振动和噪声迅速增大，并随时可能引发严重的磨损和卡滞失效；接触副润滑良好时，油膜的"刚化效应"使球轴承振动的固有频率有所提高，润滑剂中含有弥散性污浊时，振动的幅度总体升高，但弥散性污浊不会改变球轴承振动的频率特性；浙江大学博士学位论文：球轴承振动的研究 5低速时，球轴承振动的基本特征呈现不稳定状态，随着转速的提高，球轴承振动的频率特性趋于稳定，固有频率频峰升高； 6理论分析表明，干接触时钢球和滚道表面波纹度的某些谐波分量能激励球轴承的振动，振动的幅值与谐波幅值成正比，实际球轴承中钢球的分布不可能完全均匀，波纹度的激励作用会随时发生；润滑接触的分析表明，波纹度的任意谐波分量均能激励球轴承的振动； 7球轴承的几何和结构参数分析表明，球轴承尺寸越大，径向、轴向和角振动的固有频率越低；钢球中心圆直径增大，球轴承的径向和轴向振动的固有频率基本不变，角振动的固有频率有所上升，振动的幅频特性基本不变；径向游隙加大使球轴承的径向振动固有频率降低，轴向和角振动的固有频率有所升高，径向振动幅频特性的幅值升高，而轴向和角向降低；钢球的数量增多使球轴承振动的固有频率上升，幅频特性的幅值下降，径向振动的幅值下降最为明显；外圈沟曲率半径系数增大使球轴承径向振动的固有频率升高，轴向和角振动的固有频率降低，径向幅频特性基本不变，轴向和角向幅频特性幅值升高；内圈沟曲率半径系数增大使径向、轴向和角振动固有频率均下降，振动幅频特性的幅值均有升高； 8试验对比表明，传感器采用探针式安装时，由于探针接触副接触特性的影响，钡(量得到的球轴承振动信号有失真，采用专门设计和制作的试验球轴承，以固定式安装加速度计，首次测量得到了球轴承振动的真实信号，通过对振动信号的分析，验证了球轴承振动的理论模型； 9)基于时间序列分析的AR模型适用于大样本球轴承振动信号的分析，以样本长度的均方根值作定阶上界，FPE做判阶准则，给出的AR谱光滑，频率分辨率高，是球轴承振动分析的简便而可靠的手段； 10以时频域分析的小波包变换分析球轴承异音信号能够比较好地定位和聚焦异音发生的时间，时间间隔，频率范围，同样是球轴承振动分析的可靠的手段，可用作球轴承故障诊断技术。

The results were summarized as follows:(1) the 4-week interval retest reliability for the Decidedness, Comfort, and Reasons scales were .69,.80, and .89, respectively, and for the subscales of the Reasons scale ranged between .78 and .85;(2) the alpha coefficients for the three scales were .85,.91,.97, and for the subscales of the Reasons scale ranged between .78 and .93;(3) there was a positive correlation between the Decidedness scale and the Comfort scale, and both scales were negatively correlated with the Reasons scale;(4) career indecision was found to be correlated as expected with state-trait anxiety, career beliefs, and perceived career barriers;(5) there were no significant differences between social science group and natural science group;(6) the only significant gender difference was found on the Career Choice Importance scale of the Reasons scale; and (7) there were significant grade differences on all the CCFI scale scores, with higher school grade level students showing greater decidedness.

本量表共分三部分：定向量表，安适量表及原因量表。其中，原因量表尚包含「环境资讯」、「抉择时机」、「双趋冲突」、「焦虑犹豫」、「科系因素」、「外在阻力」及「自我认识」七个分量表。做答方式采六点计分，从「非常不符合」到「非常符合」。信度方面，间隔四周的再测信度，定向量表为。69，安适量表为。80，原因量表为。89（分量表介於。78至。85间）。Cronbach alpha系数，定向量表为。85，安适量表为。91，原因量表为。97（分量表介於。78至。93间）。在效度方面，定向量表与安适量表呈显著正相关(r=。67)；两量表与原因量表呈显著负相关(r=-。77及-。75)；原因量表各分量表的内部相关低於各分量表与总分的相关。大学生的生涯定向程度、对生涯定向状态的安适程度及生涯未定向原因的类型三者与特质焦虑、情境焦虑、生涯信念及职业抉择阻力有关。

Combined with DMU70V, from DECKEL MAHO, this paper presents a full work report as follows:Giving a compositive demonstration about the comparison of all type of CAD/CAM systems available in the macket , developing the proper one as the fundamental system for the study; Creating and programming the DMU70V-CAD/CAM Documentary system; analyzing Free feature modeling from the point of HSM and machining technics of 5-Axis production and the measure of HSM carried through;developing the postprocess document of HEIDENHAINTNC426 Controller which is now used on DMU70V.

同时结合德国MAHOO公司的DMU70V五坐标数控加工中心的实际情况，着重就CAD/CAM支持系统的选择论证和综合分析、CAD/CAM文件系统管理规划、基于高速加工角度的功能曲面的建模及其分析、加工过程的工艺规划和高速加工策略实现的方法、HEIDENHAINTNC426控制器后处理技术五个方面进行了探讨研究。

For a big chunk of credit-card losses; the number of filings (and thus charge-off rates) would be rising again, whether

年美国个人破产法的一个改动使得破产登记急速下降，而后引起了信用卡大规模的亏损。

Eph. 4:23 And that you be renewed in the spirit of your mind

弗四23 而在你们心思的灵里得以更新