查询词典 anode

Then we start from the development of anode materials to analyze different kind of anode materials.

同时对于纳米材料制备的历史也作了一定的介绍，并提出了模板法制备纳米材料的概念。

The company has vertical semi-continuous casting production lines, capable of producing all kinds of diameter of the circle and a square with deep processing of high-quality magnesium alloy billets deformation; extrusion production line can produce all types of magnesium alloy extrusion sacrificial anode, the sacrificial anode aluminum, zinc alloy sacrifice Anode and a variety of magnesium alloy extrusion products.

公司拥有立式半连续铸造生产线，能够生产各种直径的圆形和方形高品质深加工用变形镁合金坯料；挤压生产线可生产各类挤压镁合金牺牲阳极、铝合金牺牲阳极、锌合金牺牲阳极和各种镁合金挤压产品。

How to reduce to small opening ratio and to increase resist oxidation capability and to reduce consume of anode carbon lump , as well as how to improve to electric conductivity ratio and to reduce electric power consumption of anode carbon lump and to increase economy benefit is main purpose on optimization and treatment on electrolyze aluminum anode carbon lump .

阳极炭块优化处理的目的是降低炭块孔隙率，提高其抗氧化性能，降低阳极消耗；提高阳极炭块的导电率，降低电耗，提高经济效益和改善环境质量。

The text is start at the need of practical manufacture, then formulize all the process of design and manufacture the Cleaning Machine of Nickel Anode Plate, including design scheme, program projection, draw detail drawing, elaborate and equip parts, assemble equipment, arrangement of wires and debug system. Comprehensive use many theoretics and knowledge, such as mechanical equipment design, CAD technology, Programmable Logical Controller, mechanical system simulation and other applied softwares. The final aim is design and assemble an armamentarium that can clean the anode mud on the Nickel Anode Plate.

本文以满足实际生产需要为出发点，阐述了镍阳极板清理机设计和制造的全过程，包括出方案、规划设计、绘制零件图、零件加工装配、设备安装、布线及调试，综合运用了机械装备设计、CAD技术、可编程控制器、系统仿真学以及一些应用软件的理论和知识，最终目标是设计并安装制造一套清理阳极泥的机电设备。

Trans-Blot Cells and Systems 170-3825 Trans-Blot Cell With Wire Electrodes and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3850 Trans-Blot System With Plate Electrodes and PowerPac HC Power Supply, 100120/220240 V 170-3853 Trans-Blot System With Plate Electrodes, Super Cooling Coil, and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3910 Trans-Blot Cell With Wire Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3939 Trans-Blot Cell With Plate Electrodes and Super Cooling Coil, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3946 Trans-Blot Cell With Plate Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) Trans-Blot Cell Accessories 170-3912 Super Cooling Coil, required for all high-intensity transfers 170-3913 Gel Holder Cassette, includes 2 fiber pads 170-3914 Fiber Pads, 15.5 x 20.5 cm, 6 170-3920 Trans-Blot Standard Wire Electrode Card, cathode 170-3921 Trans-Blot Standard Wire Electrode Card, anode 170-3922 Trans-Blot Cell Buffer Tank 170-3923 Trans-Blot Cell Lid With Power Cables 170-3943 Trans-Blot Platinum Anode Plate Electrode 170-3944 Trans-Blot Stainless-Steel Cathode Plate Electrode 170-3945 Trans-Blot Plate Electrode Pair, platinum anode and stainless-steel cathode 16 规格:说明: Trans-Blot Plus

电泳转印槽组件 1。缓冲液槽及带有电缆的盖 2。凝胶支架转印夹 3。纤维衬垫 4。电极丝 5。电极板 6。特级冷却芯 Trans-Blot 转印槽是功能灵活的转印设备，可理想地用于多种转印应用。Trans-Blot 转印槽特点包括：*能进行多胶转印，可容纳3 块PROTEAN I xi 凝胶、6块Criterion 凝胶、12块Mini-PROTEAN 3 或Ready Gel 预制胶*多组参数灵活可设，可调节的电压设置（从30 V 的过夜转印到200 V 的1 小时快速实验）*电极间距设置为8 cm 用于标准印迹杂交，或设置为4cm 用于高强度印迹杂交*可选择板式电极：涂有铂金的钛作为正极，不锈钢为负极，能提供高强度电场和比其它电极更高的电流密度。或选择较经济的铂金电极丝*通过特级冷却芯和水循环仪来调节温度―是天然酶（4°C）或高强度转印的理想选择，随着转印时间增加（多达24 小时），不会引起缓冲液耗竭（在高强度转印中必须使用冷却芯，也推荐用于所有板式电极的应用）*带铰链的凝胶支架转印夹能避免滑动，确保凝胶与印迹膜间的紧密接触；每个转印夹都有颜色标记以保证在转印槽中的正确定位 Trans-Blot 转印槽的锁闭凝胶支架转印夹系统。转印夹（1）支撑凝胶（2）印迹膜（3）两侧有纤维衬垫和滤纸（4）确保凝胶三明治内的完全接触。凝胶夹垂直插入缓冲液槽中（5）。

The surface state and electrochemistry properly platinum-plated on open-cell foamed titanium electrode was investigated and he compared with IrTi anode and platinum-plated titanium toil cathode. The results show that open-cell foamed titanium can uniformly coat with excellent bonding strength platinum-plated, thickness coating 2 μm. The cathode release hydrogen voltage of platinum-plated on open-cell loamed titanium electrode is fall. The anode release oxygen voltage of platinum-plated on open-cell foamed titanium electrode is higher than Irli anode in high current.

采用电镀技术在多孔钛表面沉积了均匀的铂金属层，分析了多孔钛镀铂后的表面状态及电化学性能，并与IrTi涂层阳极及镀铂钛网阴极进行比较，结果显示：多孔钛板开孔孔隙表面可均匀沉积结合力良好的铂层，镀层厚度为2μm；镀铂多孔钛阴极析氢电位比镀铂钛网高，且在大电流下，阳极析氧电位比IrTi涂层阳极高。

The interfacial polarization resistances were unvaried during this period,suggested that the SDC modified anode was stable for the direct utilization of octane,and slight degeneration in the performance was associated mainly with the loss of OCV,which was possibly derived from a little carbon deposition within the SDC-coated anode where the level is so low that it almost has no effect to cause severe damage to the anode. The fuel composition and operation conditions had remarkably influence on the cell durability,implied that the stability of the fuel cells could be further improved by varying the iso-octane/O2 ratio and conducting a continuous operation.

燃料组分和测试条件对电池稳定性有着较大影响，说明通过改善O2/iso-octane比例以及维持电池在更长时间内放电能够获得更好的长期输出性能。

Consulting the anode effect detection method proposed by Xue and Oye, the authors propose a wavelet packet and spectrum estimation method to detect anode effect via vibration signals obtained from anode leaders.

参考Xue和Oye提出阳极效应检测方法，采用小波包与谱估计相结合的方法，对铝电解中阳极效应时阳极导杆振动信号进行小波包多层分解，以提取信号特定频段的频率特征。

Results showes that the suitable quantity tin can not appeared crystal boundary, and RE phase segregation reduced the tendency of intergranuiar corrosion, current efficiency of anode increased recessive quantity tin appearat crystal boundary with Sn phase, and can not improve the performance of aluminum anode. aluminum alloy, saciiiicial anode, electrochemistry performance, microstructure, tin

本文分析锡含量不同的铝基牺牲阳极的金相结构和电化学性能，阐述合金元素锡对晶粒尺寸、第二相数量、主要第二相组成、电化学性能的影响及铝阳极组织与性能的关系，以及电流效率损失的原因。1实验1.1铝合金熔炼 1号、2号和3号铝合金分别为m一5Zn一0.05In—lMg一0.3RE、舢一5Zn—O.05In一0.1sn一1Mg一0.3RE和m一5Z

A mathematical model for the anode of a direct methanol fuel cell considering the mass transport in the whole anode compartment and the proton exchange membrane, together with the kinetic and ohmic resistance effects through the catalyst layer is developed. The influences of key parameters on methanol crossover and anode performance are investigated.

对于DMFC的阳极，本文描述了甲醇和水在阳极及质子交换膜中的传递过程、反应动力学和欧姆阻抗效应，建立阳极和PEM的数学模型，并探讨对甲醇扩散和阳极性能影响的主要因素。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。