查询词典 annealing

Engine tappet is easy distorting and cracking by using whole heating quenching in salt bath and the high temperature annealing for the pole.

发动机挺杆经盐浴炉整体加热淬火和杆部高温退火处理后易产生畸变开裂，改用专用淬火设备，在发动机挺杆底面进行局部火焰淬火和低温回火工艺后，实现了对挺杆底面局部淬火而杆部硬度不发生变化，达到了质量要求，产品生产自动化程度高，生产率高，效果良

High precision: Advanced testing instrument,together with the entire manufacturing techniques combining the latest fully automatic wire-stretching machines,continuous annealing lines,molds and lubricants,guarantees precision,1000N/m strength,wire diameter tolerance within /-0.001mm,good vertical exceeding 98% good surface quality,high precision,high efficiency and non-sticking.

精度好：先进的检测设备，加上全部采用目前国外最先进的全自动伸线机、连续退火生产线、模具、润滑剂到全套生产工艺。从而确保精度、强度可以达到1000N/m ，线径公差控制在？0.001mm 以内，垂直度好，可以达到98%以上，广泛适用於各国不同型号的慢走丝切割机床。表面质量好，精度高，可以达到效率高，不返粘效果。

At present,the company has a complete of production facilities including middle frequency melting furnaces,strip rolling machines,annealing furnaces,thermal press machine,wire drawing machines,wire perform rings machines and fast quenching strip making machine etc.

公司具有十几年的钎料生产经验，拥有中频冶炼炉、轧带机、退火炉、挤压机、拉丝机、制环机、甩带机等生产设备，具有先进的分析、检测手段和完备的质量保证体系。

Mean value analysis is adopted and simulated annealing is used to optimize the inspection allocation in re-entrant lines.

以均值分析方法作为系统性能分析的近似方法，用模拟退火方法解决了可重人生产线中检测站设置的寻优问题。

To re-entrant lines with product form solutions, which can be analyzed by MVA, simulated annealing is adopted to search optimal solution of inspection allocation.

对近似满足乘积形式解的可重入生产系统，以均值分析作为性能分析的工具，用模拟退火方法解决了检测站的设置的寻优问题。

PCR reaction procedure was as follows; pre-denaturizing at 94℃ for 5 mm, denaturizing at 94℃ for 30s, annealing at 51-53℃ for 30 a, extension at 72℃ for 50s, 40 cycles; re-extension at 72℃ for 7 min.

PCR反应程序为94℃预变性5 min；94℃变性30s；51~53℃退火30s，72℃延伸50s，40个循环；72℃再延伸7 min。

The machine heats the reaction once again, denaturing the DNA molecules – including the newly made ones – then cools to allow annealing of primers and synthesis.

PCR仪又一次加热使DNA分子变性──包括新合成的分子──然后降温使引物退火并进行DNA合成。

The adding of anatase nano-crystalline TiO_2 to the deposition solution accelerates the depositing of TiO_2 articles from the deposition solution on the silica glass fiber. A well-combined and durable TiO_2 thin film on silica glass fibers surface obtained by controlling the deposition temperature, deposition time, deposition cycles, concentration of the deposition solution, relative concentration of the deposition materials, pH value of the deposition solution. The effect of the deposition conditions, the drying conditions and the annealing treatment conditions on the surface morphology, section morphology, growth patterns, thickness of the deposited TiO_2 thin films were investigated. Growth rate and particle size of the thin films were controlled by the deposition conditions.

实验结果表明加入微量的锐钛矿型纳米TiO_2诱导晶可以使沉积液中析出的TiO_2粒子更大程度的以锐钛矿型纳米TiO_2粒子的形式析出；通过对沉积温度、沉积液中组分浓度及相对浓度、沉积溶液的pH值的调节与控制，从而控制沉积溶液中化学反应平衡的移动，研究了以上条件对沉积速率、沉积溶液中[Ti6]2–与—OH、[Ti6]2–之间的脱水聚合反应速率的影响，总结出了获得均匀致密质量较好的TiO_2薄膜的一系列实验参数，并对薄膜的生长模式进行了系统的分析研究；通过对沉积时间及沉积次数的分析，可以有效的控制TiO_2薄膜的厚度及质量；通过对薄膜的干燥条件及热处理条件的控制，可以使利用液相沉积法获得的TiO_2薄膜进一步晶化；并分析了对薄膜引起缺陷的主要原因。

The results show that the composite is dense and silicon particles are distributed uniformly. Transmission electron microscope observations show that stacking faults with high density, twins and dislocations are found in silicon particles. The Si-Al interfaces are well-bonded and no interface reactants are found. The dislocations and eutectic silicon precipitates are observed in LD11 matrix. Sip/LD11 composite has low density of 2.4 g/cm3, low coefficient of thermal expansion of 8.1×10-6/K, high thermal conductivity of 161.3 W/, and the annealing treatment can reduce the CTE and improve the thermal conductivity.

研究结果表明：复合材料组织致密，颗粒分布均匀；透射电镜观察发现，在Si颗粒内部存在高密度的层错，同时还存在孪晶和位错； Si-Al界面结合状况良好，无界面反应物； LD11铝合金中存在位错和析出的共晶Si；复合材料具有低密度(2.4 g/cm3)，低热膨胀系数(8.1×10-6/K)，高热导率161.3 W/(m·K的特性，可以通过退火处理进一步降低其热膨胀系数，提高热导率。

For a variety of hybrid flexible flowshop process route of the problem of production scheduling, analysis of production process planning and shop scheduling system integration principle, set up the target model, by a simple genetic algorithm to improve, in the integrated model set up based on the algorithm research, put the post-evolutionary genetic algorithm and improved simulated annealing algorithm an organic combination of algorithm optimization mechanism to enable the integration and optimization of the structure complement each other to form a more efficient hybrid optimization algorithm, and to solve the problem.

针对混合柔性流水车间多种工艺路线的生产调度问题，分析了生产工艺计划与车间调度系统的集成原理，建立目标模型，通过将简单遗传算法加以改进，在建立集成模型的基础上，对算法进行研究，把进化后的遗传算法和改进的模拟退火算法有机结合，使算法优化机制融合和优化结构互补，形成较为高效的混合优化算法，并对问题进行求解。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。