查询词典 acrylic resin

The Automotive Finishes was composed of Cardura E 10-based acrylic resin with high-solids and excellent weather resistance as main resin, and Cardura E10-based polyester resin with high-solids as additional resin to be used to improve decorative properties, such as chubbiness, gloss, PGD,and so on, of the only acrylic amido automotive finishes.

该面漆以叔碳酸缩水甘油酯(商品名E10)改性高固体份丙烯酸树脂作为主体树脂，该树脂是具有高耐候性的丙烯酸树脂，以叔碳酸缩水甘油酯改性高固体份聚酯树脂作为添加树脂，弥补单纯丙烯酸氨基漆在丰满度、光泽、鲜映性等外观装饰性等方面的不足，从而形成高耐候性、高装饰性的高品质、高固体份汽车面漆。

Resins: gum dammar; PU dispersion; silicone resin, epoxy resin, alkyd, acrylic Resin, polyester resin, urethane resin, polyamide resin, amino hardener; two pack hydroxy acrylic, two pack isocyanate-free acrylic; vinyl chloride co-polymers, polyvinyl butyrals, thixotropic resin.

树脂类：达玛树脂；水性PU分散体；有机硅、环氧、醇酸、丙烯酸、聚酯、聚氨酯、聚酰胺、氨基固化剂；双组份羟基丙烯酸、双组份不含异氰酸脂丙烯酸；聚氯乙烯共聚物、聚乙烯醇缩丁醛、触变性树脂。

Synthesis of hydroxyl acrylic resin used in acrylic amino paint and choice of amino resin are studied.

研究了丙烯酸氨基漆用羟基丙烯酸树脂的合成、氨基树脂的选择。

On the basis of the former results, Miscibility of unseparated reaction solution with varied resins were investigated by means of co-solvent method and the glossiness of the film method. The miscibility of 344# acrylic resin with the mixture was better than others, when the ratio of the mixture to 344# acrylic resin was one to ten, the miscibility attained best, and the glossiness of the film was 100 percent.The effect of miscibility and molecular weight on delaminating rate were investigated by the co-solvent method.

在聚马来酸醉溶解性能、相容性测定的基础上，通过共溶剂法、溶液涂膜法和溶解度参数法，考察了反应液不分离直接和不同树脂复配的情况。344#短油度醇酸树脂和接枝物的相容性较好，在接枝物：短油度醇酸树脂=1：10时，相容性达到最好，涂膜光泽值达到100%。

Epoxy acrylic resin and epoxy monoacrylate resin were synthesized from biphenol A epoxy resin and acrylic acid , then a new UV-curing resin was synthesized through the reaction of them and maleic anhydride.

本文先采用双酚A环氧树脂和丙烯酸合成了环氧丙烯酸酯和环氧单丙烯酸酯，再以它们和顺酐作为反应的原料，进行反应最终合成了一种新型UV固化树脂。

A photosensitive resin for UV curing acrylic powder coating has been synthesized by esterification of methacrylic acid and GMA-type acrylic resin at the presence of ethyl acetate as solvent, tetramethylammonium chloride as catalyst, YK as inhibitor.

以醋酸丁酯为溶剂，四甲基氯化铵为催化剂，氮氧自由基为阻聚剂，由甲基丙烯酸缩水甘油酯类丙烯酸树脂与甲基丙烯酸酯化反应制得了UV固化粉末涂料用感光性丙烯酸树脂。

Acrylic resin as coated material, N- thiophosphric triamide and dicyandiamde as biological inhibitors, with Fluid Bed spraying biological inhibitors on urea granular surface and coated it with acrylic resin afterward, four coated urea fertilizers were made for monitoring slow/controlled effects of coated fertilizers in distilled water.

采用丙烯酸树脂为包膜材料，以NBPT和DCD为生化抑制剂，利用流化床对尿素进行涂层生化抑制剂及包膜，制备4种包膜肥料，对这些包膜肥料在水中的控释效果进行了研究。

Acrylic resin as coated material, N- thiophosphric triamide and dmyandlamde as biological inhibitors, with Fluid Bed spraying biological inhibitors on urea granular surface and coated it with acrylic resin afterward, four coated urea fertilizers were made for monitoring slow/controlled effects of coated fertilizers in distilled water.

采用丙烯酸树脂为包膜材料，以NBPT和DCD为生化抑制剂，利用流化床对尿素进行涂层生化抑制剂及包膜，制备4种包膜肥料，对这些包膜肥料在水中的控释效果进行了研究。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

Effects of hard/soft monomer ratio,the content of acrylic acid,the content of aromatic monomer BNMA,the ratio of amino resin curing agent to acrylic resin,the conditions of curing on properties of the films were investigated.

合成了水性丙烯酸树脂并用其配制了汽车罩光清漆，研究了硬/软单体配比、丙烯酸单体的用量、芳香酯单体的用量、氨基树脂固化剂/丙烯酸树脂的配比及固化条件对漆膜性能的影响。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。