查询词典 acrylic acid

The M11 paint developed by Masteel is a semi-organic material,mainly composed of acrylic resin emulsion,zinc dichromate solution,boric acid and glycerol.It can be applied in the high speed roll coating of electrical steels made by continuous annealing lines.The interlamination resistance of M11 chromate-containing insulating coating is above 150 Ω·mm2 per piece...

并对其性能进行了检测分析，结果表明，M11含铬绝缘涂料是一种主要由丙烯酸树脂乳液、重铬酸锌水溶液、硼酸、甘油等组成的半有机涂料，其性能满足电工钢连续退火生产线高速辊涂的需要；通过涂层工艺的合理控制，M11含铬绝缘涂层，其层间电阻在150Ω。mm2/片以上，综合性能满足电工钢用户的需要。

The introduction of the acrylic or methacrylic acid in middle layer is helpful to obtain a latex with smaller particle size and more narrow particle size distribution.

本文对聚合工艺、乳胶粒中间层分率和软硬单体比例、官能团单体含量等对GAD室温自交联乳液的粒径及分布的影响进行了研究。

Polymer A is a acrylic copolymer containing 70% by weight of methacrylic acid and 30% by weight of methyl methacrylate prepared by a catalytic chain transfer method to give a polymer having a number averaged molecular weight of approximately 600 as measured by GPC.

聚合物A是丙烯酸共聚物其含有甲基丙烯酸重量70％，按重量的30％甲基丙烯酸甲酯的催化链转移的方法准备给予聚合物具有的平均人数约600分子量为由GPC测定。

Variety of state-owned chemical characteristics are: polyester acrylic resin: Acid Value 1.5 mg KO H / g, the appearance of water-white transparency, good adhesion.

国有化工特色品种有：聚脂丙烯酸树脂：酸价≤1.5 m g KO H／g，外观水白色透明，附着力好。

Fluorescent colors: Orange, green, yellow, and green, red, pink, Orange, Blue Material: Paper, cardboard, acid resin, wood, PVC polystyrene, polycarbonate, acrylic resin, coating metals, with coating of polyester, ABS Application: Posters, outdoor signs, painting shift pattern printing method, PVC containers, bags and plexiglass Characteristics: Gloss, hiding power, the stability of the screen, flexibility, outdoor weather, the speed of drying, anti-alcohol / chemical resistance, the pressure convex

荧光颜色：桔红，绿，黄绿，红，粉红，桔黄，蓝基材：纸，卡纸，丁酸脂，木材，PVC 聚苯乙烯，聚碳酸酯，丙烯酸树脂类，涂漆金属，带涂层的聚酯，ABS 应用范围：宣传画，室外标志，移画印花法图案，PVC容器，箱包和有机玻璃特征：光泽，遮盖力，网版稳定性，柔韧性，室外耐候性，干燥速度，抗乙醇／化学品性，压凸

An acrylic resin was synthesized by the radical copolymerization with methyl methacrylate, butyl acrylate and methacrylic acid monomers in solution using benzoperoxide as initiator. Appropriate parameters of monomer ratio, monomer concentration, solvent, and reaction temperature were found by experiment.

以过氧化二苯甲酰为引发剂，采用溶液聚合合成了甲基丙烯酸甲酯-丙烯酸丁酯-甲基丙烯酸树脂，通过实验确定了自由基共聚合适宜的单体配比、单体浓度、引发剂浓度、溶剂以及反应的升温速度。

Good thermal stability, High mechanical strength.Used as catalyst or catalyst carrier in the manufacturing of the important industrial products, such as cyanuramide, benzene anhydride, maleic acid anhydride, butadiene rubber, acrylic nitrite, etc.

用途：本产品在三聚氰胺、苯酐、顺丁烯二酸酐、顺丁橡胶、丙烯腈等重要工业品生产中用作催化剂及催化剂载体，也广泛用于石化产品的精制脱除芳烃，也可用于有机气体、液体的选择性吸附分离及离子交换脱除水中多价有害元素等。

And the epoxy acrylic cationic resin applicable to cathodic electrodeposition coating was synthesized by using aminating agent of diethanolamine and neutralizing agent of acetic acid.

并以二乙醇胺为胺化剂、冰醋酸为中和剂合成了可用于阴极电沉积涂料的环氧丙烯酸阳离子树脂。

Two-component waterborne polyurethane paint composed of acrylic dispersion and hydrophilically-modified polyisocyanate has fast dry time, good adhesion, flexibility, impact resistance, but poor water and chemical-resistance. The dry time becomes shorter with the increase of glass transition temperature and the decrease of acid value; the gloss of the film decreases with the increases of hydroxyl value, acid value and Tg of emulsion polymer; higher Tg polymer leads to harder film.

将制得的丙烯酸分散体与亲水改性多异氰酸酯组分配制水性双组分聚氨酯涂料，发现漆膜表干和实干比较快，干燥时间随玻璃化温度升高而缩短，随酸值的增加而增加；附着力、柔韧性和冲击强度比较好；光泽随分散体羟值、酸值的增加和玻璃化温度升高而降低；硬度随玻璃化温度升高而升高；较高的酸值使涂料的耐化学品性和耐水性较差，羟值在100mgKOH/g时较好，而酸值应尽可能低。

C for 2-3 hours;(2) fiber-grafted polymer preparation, mixing activated fiber material, phenylethene, acroleic acid, acrylic nitrile, acrylamide, potassium peroxodisulfate and water evenly, proceeding reaction at normal pressure and 50-60 Deg.

II。纤维素接枝聚合物材料的制备，将步骤I制备的活化纤维材料、苯乙烯、丙烯酸、丙烯腈、丙烯酰胺、过硫酸钾和水混合均匀，在常压、50～60℃聚合反应2～4小时，所得反应产物进行干燥。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。