查询词典 Si

The dispersibility of Si〓N〓 suspensions at various conditions is in good agreement with its colloidal behavior.

氮化硅浆料在不同条件下的分散性与其胶体特性具有很好的一致性。

The investigation on rapidly solidified powders produced by ultrasonic gas atomization showed that the two kinds of dispersoids presented in Al-Cu-Fe and Al-Fe-V-Si alloys have simultaneously reformed in the new alloy, there is not any other dispersoid in the powders below 61μm.

对超音速气体雾化快速凝固的上述合金粉末进行的研究表明，新的合金中同时形成原来两个合金系中的析出相；在61 μm的粉末中，没有发现第三种析出相。

Nd and Y showed more evident effects than Gd and La due to lower temperature of eutectic reaction with aluminum. In order to investigate mechanism of the formation of the intercellular dispersoid which is being in debate and possibility of suppressing the dispersoid, a nucleation kinetic model which including unsteady nucleation and effect of alloy element was established.

Al-Fe-Mo-Si-Zr-Ti合金粉末具有四种凝固组织，初生Al〓〓，α-Al与Al〓共晶，胞晶及显微胞晶，合金元素Mo的加入，显著提高合金粉末凝固前的过冷度，使10~40μm粉末的凝固机制发生了变化，由导热控制型转变成溶质扩散控制型，从而基本上消除了该尺寸范围内粉末凝固组织中共晶成分和初生相，但对大于40μm的粉末，因共晶区富Zr核心的优先形成而使Mo的作用效果不明显。

The introduction of displacement operator, derivation operator, integral operator and the operator, such as differential calculus operator and the definition of the form of computing, will be applied to similar derivation formula gives Newton a Kete Si formula and Bernstein theorem Law said the operator, and form is derived; linear differential equations is the operator solution.

有没有高手可以帮我翻译下这段话啊？？？引入位移算子、求导算子、积分算子和差分算子等微积分算子的定义及其形式运算，将其应用于近似求导公式；给出牛顿一柯特斯公式和伯恩斯坦定理的算子法表示，并进行形式推导；给出线性常微分方程的算子解法。

Half stitches , quarter stitches and three-quarter stitches are often called fractional stitches because they are divi si ons of the cross stitch.

半针， 针季度和三季度的针通常被称为分数针，因为他们是十字绣分歧。

Five novel torsion-mirror optical actuators including double-beam thickness differential structure with single torsional axis, double flexible folded-beam structure with single torsional axis, double-beam vertical torsion comb structure with single torsion axis, four-beam differential compound-micromirror structure with double torsional axis and the combined structure of the four basis forms above, are brought forward. All of these devices could be fabricated by the same silicon micromachining process we have developed. The deformation compensation design with local enhancement for the thin torsional beam which is the key structure of these devices is also put forward to improve the reliability. The three-dimension solid model and two-dimension reduced order model of the torsion-mirror optical actuator are established and then the numerical simulations for evaluating the device characteristics of the statics, dynamics, electrostatic field, mechanical and electrostatic coupling, fluid and solid coupling are carried out to optimize the structure design. Furthermore, three optical fibre clamping structures which could be integrated monolithicly are designed and analyzed to improve the optical coupling capability. 4. Three flexible process flows combined with bulk silicon micromachining and surface silicon micromachining are brought forward to fabricate these novel single-crystal silicon or polysilicon torsion-mirror optical actuators by using the same lithography masks for both SOI wafer and regular silicon wafer. A series of important process experiments are carried out to optimize the process parameters and the process flows. Some novel and typical process phenomena which occurred during the microfabrication are analyzed and then the corresponding solutions are put forward. 5. A MEMS dynamic testing system which exploit blur image synthetic technique, stroboscopic image matching technique, stroboscopic mirau microscopic interferometry technique and microscopic laser dopper vibrometer technique is set up to measure three-dimension and six-freedom micro motions of any MEMS devices with nanometer resolution.

在对硅微机械扭转镜光致动器的光机电特性系统地理论研究的基础上提出了硅微机械扭转镜光致动器的结构设计准则。3、提出了单轴双梁厚度差分结构、单轴双柔性折叠梁结构、单轴双梁垂直扭转梳齿结构、双轴四梁差动复合微镜结构以及以上四种基本结构组合后的衍生结构等五种工艺加工技术兼容的新型的硅微机械扭转镜光致动器，对器件关键结构薄厚度、高耐疲劳扭转梁进行了局部加强的变形补偿设计，建立了器件的三维实体模型以及两维降阶模型，对提出的新结构硅微机械扭转镜光致动器进行了系统的静力学、动力学、静电场、力电耦合和流体固体耦合的建模仿真与优化设计，同时设计并分析了三种可实现单芯片集成的弹性光纤定位夹紧结构。4、提出了组合体硅微加工技术与表面硅微加工技术、兼容同一套光刻版图、可分别基于SOI 晶片和普通Si 晶片、适应于制造提出的各种新结构单晶硅和多晶硅硅微机械扭转镜光致动器的三套柔性加工工艺流程，开展了一系列重要工艺步骤的单项工艺试验，对工艺流程与工艺参数进行了优化，针对加工过程中出现的具有普遍意义的典型工艺问题进行了讨论和分析，并提出了解决方法。5、创新性地将模糊图像合成技术、频闪图像匹配技术、频闪Mirau 显微干涉技术与显微激光多普勒测振技术有机结合，建立起了一套周期运动测量与瞬态运动测量相结合、单点运动测量与全视场运动测量相结合、满足不同MEMS 器件各种动态测试要求的集成的MEMS 三维六自由度微运动精密测量系统。

In this paper, using Doppler broadening positron annihilation technique investigates the effect of multiple implanting and oxygen concentration variation during.

通过多普勒增宽正电子湮没测试，不同剂量和能量注入、退火后的样品其顶层Si中的氧相关缺陷有着不同的性质。

In present work, the coincidence Doppler broadening spectra of positron annihilation radiation of NiTi, NiAl alloys, single crystal of Si, and pure metals, such as Fe, Co, Al, Nb, Cu, Ni, Ti have been measured.

利用正电子寿命谱参数研究了NiTi合金马氏体转变及其奥氏体转变过程中的微观缺陷和电子密度的变化，从而揭示NiTi合金马氏体转变的微观机制。

The Ethiopia covers with tiles the word of cite place official says center of Er tower information that day, this year in August, be in dust capital inferior the area of all alone collect that Si Yabei Ba Yina makes an appointment with 500 kilometer, a flock of lions assault the livestock that local farmer and they feed suddenly again and again, rush into dorp to have a person even.

埃塞俄比亚瓦尔塔信息中心当日援引地方官员的话说，今年8月，在埃首都亚的斯亚贝巴以南约500公里的索罗地区，一群狮子突然频频袭击当地农民和他们饲养的牲畜，甚至闯进村落吃人。。。。。。

The slag complex coagulant has double functions of high absorption and coagulation.

该矿渣复合混凝剂具有高效吸附和混凝(Al、Fe、Si起作用)的双重作用。

By the time of its fall, most of the prisoners were writers who had written against the corruptions of the government.

到它被攻陷的时候，里面多数的犯人是写了反对政府贪污文章的作家。

The most obvious variation to ovum morphological character was that the color was changed from light green to sepiaceous in embryonic development, and all the ovums were almost hatched after 96h.

在胚胎发育过程中卵的形态特征最明显的变化是颜色从淡绿到深褐色，卵在发育96h后卵基本全部孵化。