英语人>网络例句>PE 相关的网络例句
PE相关的网络例句
与 PE 相关的网络例句 [注:此内容来源于网络,仅供参考]

In order to pay great attention to the product quality management, it comprehensively carries out the TQC and 6σmodern management.

公司十分注重产品质量管理,全面推行TQC和6σ现代质量管理方法,金泰牌PE-RT、PE系列管道的主要技术指标在行业内处于领先水平。

The experimental results showed that the trinary of additive flame - retardant was needed to be used together to produce ideal self-extinguishing high expansion PE products while the performances of high expansion PE were unchanged.

研究结果表明:只有对添加型阻燃剂三元并用,方能不降低高发泡聚乙烯的物性,制得较为理想的高发泡聚乙烯自熄型制品。

This text aim is passing the analysis to the selection of Voluntarism, pragmatism, existentialism, getting the relation between PE, and the function and the influence to PE's development.

本文旨在通过对选取的唯意志主义、实用主义、存在主义三种人本主义哲学流派的观点的分析,得出它们与体育之间的关系,以及它们对我国体育思想发展所起到的作用和影响。

Absrtact: Through questionnaire , documents , data and statistics , the author makes an investigation into middle school student' s present condition of PE and health behavior in G ansu Province1 The results :Almost hal f students don' t have a complete knowledge of PE and there is di fference between knowledge and behavior ;They are more interested in the characteristic and recreational sports items ;They have a better understanding of health concept and its elements ; Knowledge of sel f health care lacks1 On the basis of these , the author puts forward s ome countermeasures and suggestions.

摘 要:采用问卷调查、文献资料调研和数理统计等方法,对甘肃省中学的体育与健康行为状况进行了调查研究。发现甘肃省中学生对体育的认识与行为之间存在着差异,对具有特色性和娱乐性的运动项目兴趣较浓,对健康内涵以及影响健康因素的理解程度较好,自我保健方面的知识缺乏,在此基础上提出了若干对策与建议。

The ZTX 99 HSHM-PE fiber is one of three major hi-tech fibers (specifically the carbon fiber, the armied fiber and the HSHM-PE fiber) and the toughest of all and its basic features are as follows

ZTX 99高强高模聚乙烯纤维是当今世界三大高性能纤维(碳纤维、芳纶和高强高模聚乙烯纤维)之一,也是目前世界上强度最高的纤维,其基本特性为

From culturological points of view ,on the one hand, PE is a kind of body-cultural activity with little ideology, while moral education is strongly ideological. One is physical, the other is metaphysical. They form a sharp contrast; on the other hand, unlike arts which shows feelings and ideas a priori, PE mainly demonstrates feeling and ideas I concrete activities.

目前看来,国际上存在着优秀运动员文化知识欠缺和智力水平较高的反差、教练员中具有高水平运动经历者多和掌握精密体育科学者少的矛盾;这种反差和矛盾是体育自身不可克服的哲学矛盾所致,还是体育管理体制和运动机制不合理所致,值得深思。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明,MAO不仅仅只和乙醇作用,MAO还与MgCl_2本身有一定的作用,这是一个极为重要的发现;3、通过ICP和EDX表征,发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布;4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能,特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化,并且催化剂寿命长,表现出稳定的动力学行为,最终获得了高堆密度(大于0.35g/ml)的球形聚乙烯颗粒;5、本文选择MSPC-5为研究对象,考察了聚合反应参数对催化剂的活性及其聚合物的影响,研究发现:不同的烷基铝对催化剂具有非常重要的影响,特别足TIBA对MSPC-5的助催化活性最高,烷基铝的加入量有一个较佳值,聚合温度为80度时活性最高,H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小;、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨,制备出了一种的新型的氯化镁载体,并将该载体用于多种单活性中心催化剂的负载化研究,研究表明:1、通过BET、XRD的表征,再次证实了MAO与MgCl_2之间具有直接作用,与XPS的研究结果相一致;2、当研磨时间高于12小时时,延长研磨时间对载体的结构没有显著的影响;3、将配合物3负载于共研磨时间不同的一系列载体上,乙烯聚合结果表明,尽管共研磨时间对负载催化剂的活性具有明显的影响,但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明,MAO不仅仅只和乙醇作用,MAO还与MgCl_2本身有一定的作用,这是一个极为重要的发现; 3、通过ICP和EDX表征,发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布; 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能,特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化,并且催化剂寿命长,表现出稳定的动力学行为,最终获得了高堆密度(大于0.35g/ml)的球形聚乙烯颗粒; 5、本文选择MSPC-5为研究对象,考察了聚合反应参数对催化剂的活性及其聚合物的影响,研究发现:不同的烷基铝对催化剂具有非常重要的影响,特别足TIBA对MSPC-5的助催化活性最高,烷基铝的加入量有一个较佳值,聚合温度为80度时活性最高,H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小;、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨,制备出了一种的新型的氯化镁载体,并将该载体用于多种单活性中心催化剂的负载化研究,研究表明: 1、通过BET、XRD的表征,再次证实了MAO与MgCl_2之间具有直接作用,与XPS的研究结果相一致; 2、当研磨时间高于12小时时,延长研磨时间对载体的结构没有显著的影响; 3、将配合物3负载于共研磨时间不同的一系列载体上,乙烯聚合结果表明,尽管共研磨时间对负载催化剂的活性具有明显的影响,但是它对聚合物的性能以及催化剂的影响不明显。

Lagenarium was higher 60%(for example, Glycyrrhiza yralensis, Lycium barberum and Desmodium styracifolium) as the concentration 0.01g/ml. Especially, the G. yralensis showed the strongest inhibitory effect on it with inhibitory rate of 99.6%. The inhibitory rate of 12 PE against mycelium growth and 15 PE against appressorium formation of C.

供试提取物在质量浓度为0.01 g/ml条件下,甘草、枸杞、金钱草等11种植物的80%乙醇提取物对黄瓜炭疽病菌分生孢子萌发的抑制率大于60%,其中甘草的抑制作用最强,达99.6%;12种提取物对黄瓜炭疽病菌菌丝生长的抑制率大于50%;15种提取物对黄瓜炭疽病菌附着胞形成抑制率达50%。

Shrinkable packer is automatic successive shrinkable packaging device and is the latest pattern in our country, using quartz farness ultrared rays tube and electricity-saving (may save more than 15%); the humidity of shrinking and the conveying rate of the electric machine is adjusted, and the adjusting range is extensive; Original creation roller rotation devise and can work continuously.

佛山PE热收缩包装机〓中山热收缩机〓深圳收缩炉〓东莞PE收缩包装机/珠海收缩机〓收缩机〓热收缩机〓收缩包装机〓热收缩包装机〓收缩炉〓烘干炉〓烤箱是目前国内最新型的自动连续收缩包装设备,采用石英远红外管加热,节电高效(节电15%以上);收缩湿度和电机机传机速度稳定可调,且调节范围广;独创滚筒自转装置,可连续工作。

第42/90页 首页 < ... 38 39 40 41 42 43 44 45 46 ... > 尾页
相关中文对照歌词
PE 2000
PE 2000 (Rock Remix)
PE 2000 (Spanish Version)
推荐网络例句

I am accused of being overreligious," she said in her quiet, frank manner,"but that does not prevent me thinking the children very cruel who obstinately commit such suicide.""

客人们在卡罗利娜·埃凯家里,举止就文雅一些,因为卡罗利娜的母亲治家很严厉。

Designed by French fashion house Herm è s, this elegant uniform was manufactured in our home, Hong Kong, and was the first without a hat.

由著名品牌 Herm è s 设计,这件高贵的制服是香港本土制造,是我们第一套不配帽子的制服。

Do not 'inflate' your achievements and/or qualifications or skills .

不要 '夸大' 你的业绩或成果,条件或者技能。