查询词典 M-roof

The specimen laser cutting experiments show that it is feasible to cut thin quartz glass plates pricisely with laser cutting technique with accuracy of better than 20μm and central symmetry of less than 3m.

对石英玻璃薄板的激光精密切割进行了实验验证，实验结果表明，激光精密切割技术能够较好地运用于石英玻璃薄板的精密切割加工中，其加工精度优于20μm、中心对称度小于3μm。

The results indicate that improving temperature to reflux, using low polarity solvent as dispersion medium and proper molar ratio of tetrabutyl titanate to stearic acid can bring out good modification. The function of tetrabutyl titanate is to react with the surface hydroxyl groups and adsorbed H2O on the powder particles to produce new binding sites such as M—O—Ti—OC4H9and M—O—Ti—OH, which can easily react with the carboxylic acid. As temperature increases from room temperature to reflux temperature, the reactions between RCOO- and Ti change from coordinate bonds to covalent bonds, which makes the carbon chains of stearic acids more strongly bound with the powder particles surface.

研究结果表明，提高处理温度、适当增加复合改性剂中硬脂酸的量并选用极性弱的有机溶剂可达到比较理想的改性效果；钛酸四丁酯的作用是与粉体粒子表面的羟基以及吸附水反应产生偶联点，如M—O—Ti—OH，这些偶联点易于与羧酸反应；在低温时RCOO-与偶联点的Ti之间以配合物的形式发生作用，在回流温度下处理时，主要发生酯化反应，使硬脂酸更牢固地嫁接到粉体粒子表面，改性效果更好。

For the channel width of 100 μm, the threshold rotational speed increases from 1600 to 1900, 2500 and 3600 rpm with an increase of the divergence angle from 30 to 40, 50 and 60 deg, respectively.

旋转方向为逆时针转，流道宽100 μm倒Y夹角30、40、50及60的临界转速分别为1600、1900、2500及3600 rpm，而固定倒Y夹角为30，流道宽度为150、200、300 μm的临界转速分别为2100、2500及3600 rpm。

The philosophy so typical of BMW M naturally continues into the design and configuration of the driver's "workplace": Both of these all-wheel-drive high-performance sports cars come with a special M cockpit with the instrument cluster featuring a variable pre-warning field in the rev counter, specific vehicle function displays, and white display illumination.

这样的哲学宝马典型的自然延续到的设计和驱动程序的"工作地点"的配置：所有这些轮双方驱动高性能运动具有特殊的仪器M有一个变量具有驾驶舱前的群集来车预警领域的转速表，具体车辆函数显示，白色照明显示。

In section 2, we give the notion of M-valuation systems for a commutative ring, and establish some basic results on M-valuation systems.

在第二节中，给出了M-赋值系统的定义，并给出了相关的结论。

The research shows that gas concentration shows generally an increasing tendency along the working face airflow direction, from 0.095% to 0.18%, under the effect of gas drainage points, up-and-down changing locally; gas distribution in a transect of working face is unequal, under the effect of gas emission, ventilation and drainage, the gas concentration near coal wall is larger than that near goaf, which is a concave function distribution within a distance of 1876.5 m from the inlet of working face, after greater than 76.5m, which is a decreasing distribution from coal wall to goaf.

研究表明，该工作面瓦斯体积分数沿风流方向总体呈逐渐增加趋势，介于0.095%~0.18%之间，受瓦斯抽放点的影响，局部有起伏变化；工作面横断面瓦斯体积分数分布不均匀，受瓦斯涌出、通风和抽放的影响，靠近煤壁侧瓦斯体积分数要高于采空区侧，在距离进风口约18~76.5 m范围内为凹函数分布，大于76.5 m之后，从煤壁至采空区为单调下降函数分布。

According to the analysis of the relation of between angle momentum and magneticmomentum, we find that a2 dynamo is main mechanism for the stars withdeep interior convection zone similarly late-M type stars.

从M型主序星的自转周期的和恒星内部对流区随色指数的分布来看，M型主序星的色球活动行为与αΩ发电机理论的预期有明显的差异。

The results show that the dynamic force and thermal conditions of forming the squall line were the convergence of cold air from Mongolia cold vortex and the warm-humid air current before west trough to form the convectional system at moderate 3 scale; the rapid development and southward shift of MβCSs was caused by a strong unstable stratification and the shear line of suitable vertical wind; a heavy hail occurred after a vertical liquid water content over 65 kg/m^2 was firstly measured by weather radar; a sharp reduction of VIL indicates that a disaster strong wind will occur at soon.

结果表明：蒙古冷涡旋转下甩冷空气与西风槽前的暖湿气流汇合，形成中p尺度的对流系统是飑线形成的前期动力和热力条件；强的不稳定层结和合适的垂直风切变导致了MβCSs的迅速发展和南压；在天气雷达首次观测到垂直液态水含量值超过65kg/平方公尺后2h内出现了大冰雹；垂直液态水含量的突然减小标志着灾害性大风的开始。

By the cooling curve and the temperature field, it can he known that, the solidification time of ribbon is 1.0×10^(-4)s, the even solidification rate of ribbon with 60 μm thickness is about 10^6K/s, and the temperature of cooling process does not obviously go back by the release of solidification latent heat. The solidification rate of ribbon is at 0.010-0.394 m/s, and it changes from high to low with the prolonged solidification time.

由冷却曲线和温度场曲线类比结果可知，带子的凝固时间为1.0×10^(-4)s；单辊快淬的平均冷却速度在10^6 K/s数量级，且凝固潜热的释放不会明显地引起冷却过程的温度回升；带子的凝固速度在0.010~0.394 m/s范围之内随凝固时间的延长逐渐由大变小。

In copepod, Thermocyclops taihokuensis and Mesocyclops thermocyclopoides were dominant, and their average lengths were 730μm and 680μm, respectively. Nauplii and cyclopoid copepodites also had high abundance and biomass.

桡足类优势种为台湾温剑水蚤和温中剑水蚤，平均体长介于680~730μm之间，此外，无节幼体和剑水蚤幼体在数量和生物量上也比较高。

The concept of equivalent rotationally rigidity is offered and the formula of rotationally rigidity is obtained.

主要做了如下几个方面的工作：对伸臂位于顶部的单层框架—筒体模型进行分析，提出了等效转动约束的概念和转动约束刚度的表达式。

Male cats normally do not need aftercare with the exception of the night after the anesthetic.

男猫通常不需要善后除了晚上的麻醉。