查询词典 FCC
- 与 FCC 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
Through research on the current status of process automation control instrumentation in production of FCC unit, it is proposed that using CENTUM CS3000 DCS system as main control device in FCC L.
通过对催化裂化装置生产过程自动控制仪表现状的研究,提出了采用CENTUM CS3000集散控制系统做为催化裂化装置控制的核心设备。
-
Emphasis has been put on changes of structure properties such as crystallization, crystal cell parameter, BET surface area, average pore diameter and pore volume with addition amount of FCC decant oil under conditions that the ratios of toluene to FCC decant oil are 1∶1 and 2∶1 respectively.
结果表明,当剂油比为1∶1时,分子筛的结晶度和晶胞参数随催化油浆添加量的变化呈现先增加后减小趋势,当noil/nCTMAB=0.34时,其晶胞参数最大可以达到5.95 nm;当剂油比为2∶1时,随添加剂量的增加,分子筛结晶度降低,BET表面积成先增大后减小,而孔容和平均孔径呈逐渐增加趋势。
-
The grain boundary energy, as a function of the excess volume △V, is closely related to the crystalline structure for the same element.
分别采用普适状态方程和准谐德拜近似对Co的fcc与hcp结构和Fe的fcc与bcc结构的界面能进行了计算,结果表明同一种元素不同结构的界面能有差异,它们的界面能是过剩体积△V的函数。
-
Non-discriminatory access to network elements. Nondiscriminatory access to the poles, ducts, conduits, and rights-of-way owned or controlled by the BOC at just and reasonable rates.
尽管批准BOC进入长途电话市场的权利属于FCC,国会还是在第271条款中提供了一个清单来指导FCC的本地市场竞争评估。
-
A summary is given on the FCC technology development at home and abroad in recent years, including the process capacity, unit scale, new process technology and new catalyst as well as the role FCC process in residuum processing.
对近年来国内外催化裂化工艺在加工能力、装置规模、新工艺新催化剂开发,催化裂化工艺在重油加工中的作用等进行了综述。
-
FCC. Generally I just call FCC and do not mention the apocrine cmetaplasia.
一般情况下我们说纤维囊性变而不说大汗腺化生。
-
The numbers of clusters made up of 1551 and 1541 bonded pairs representing the non-crystal structure occupy predominate position and the small numbers of clusters made up of 1431, 1661 and 1441 bonded pairs coexist in the non-crystal system at 4×10〓K/s cooling rate, thus there exist a large number of icosahedra clusters in the non-crystal system. The numbers of clusters made up of 1421 bonded pairs corresponding to the fcc-like structure occupy predominate position and the small numbers of clusters made up of 1422 and 1551 bonded pairs coexist in the crystal system during the 4×10〓K/s cooling process, thus the system can form the regular fcc-like structure.
在4×10〓K/s的冷速下,标征体系非晶结构的五重对称键型1551和1541所形成的小团簇数量在非晶体系中占主导位置,同时还存在少量的1431、1441和1661等其它键型形成的小团簇,这样,体系中含有大量的二十面体团簇结构;在4×10〓K/s的冷速下,标征面心立方结构的1421键型所形成的小团簇数量在晶体中占第一位,同时还存在一定量的1422、1441和1661等其它类型的键对所形成的团簇,体系最终形成面心立方结构。
-
As caustic solution prewashing of FCC gasoline discharges lots of lye, it is nec essary to improve the process. The solid base pretreating of FCC gasoline wil l completely avoid this problem.
用苛性碱液对汽油进行预碱洗时易产生大量废碱液,为彻底消除废液提出了用固体碱预处理代替苛性碱液预碱洗的方法。
-
The results showed that with the increase of nitride partial pressure in the range of 2. 0~8. 0×10〓Pa, the hardness of NbN, TaN single layer films decreased, but the hardness of TiN films kept unchanged. The crystal structure of TaN films changed from the mixture of tetragonal β-Ta and faced-center cubic δ-TaN to hexagonal TaN and that of NbN films from FCC δ-NbN to hexagonal ε-NbN. The crystal structure of TiN films is FCC in all the range of partial pressure researched.
研究结果表明:在2.0~8.0×10〓pa的氮分压之间,随氮分压的升高,TaN和NbN薄膜硬度下降,而TiN薄膜的硬度值不随氮分压的变化而变化;TaN薄膜的相结构由低氮分压时的正方β-Ta和面心δ-TaN所组成的两相混合物过渡到六方TaN结构,NbN薄膜则由面心立方结构的δ-NbN逐渐过渡到六方结构ε-NbN,而TiN薄膜的晶体结构基本不随氮分压的变化而变化,均为面心立方结构。
-
Given their stated goal of protecting the new service from the ravages of sporadic E and F2 layer interference, the FCC was NOT totally successful.
给他们的保护新服务的陈述的目标免受分散E 和F2 层数干涉破坏, FCC 不是完全成功的。
- 推荐网络例句
-
However, as the name(read-only memory)implies, CD disks cannot be written onorchanged in any way.
然而,正如其名字所指出的那样,CD盘不能写,也不能用任何方式改变其内容。
-
Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.
镀锌钢托盘多用于出口,替代木托盘,免薰蒸,符合欧盟、北美各国对出口货物包装材料的法令要求;喷涂钢托盘适用于重载上货架之用,托盘表面根据需要制作成平板状、波纹状及间隔形式,满足不同的使用要求。
-
A single payment file can be uploaded from an ERP system to effect all pan-China RMB payments and overseas payments in all currencies.
付款指令文件可从您的 ERP 系统上传到我们的电子银行系统来只是国内及对海外各种币种付款。