查询词典 EDS

B〓C coating possessed 4% of porosity, 12. 8Gpa of bonding strength, 28Gpa of microhardness, and its modulus is up to 230Gpa. It would provide a kind of coating material with excellent properties for many industrial fields.(2) The phase composition of B〓C coating was studied by XPS, XRD and EDS. It was found that: the oxidation activity energy of B〓C powder and coating is different, which is due to the difference of phase composition between them.

用XPS、XRD和EDX研究了碳化硼涂层的相组成，发现碳化硼粉末在涂层形成过程中不可避免的存在分解；比较了碳化硼涂层和粉末在高温下的氧化行为，发现涂层的氧化活化能比粉末要低，这是由于涂层和粉末相组成不同所造成的。

In order to explore the influence of the bath composition on Ni-W-P alloy coating structure and properties, to find the right ratio, so as to lay the foundation for follow-up experiments, SEM/EDS, X-ray diffraction, and metallographic analysis and other methods were adopted to study the composition and structure of different chemical deposition of Ni-W-P alloy. And the hardness of different components of the sediment layers plated state and the hardness after heat treatment were measured.

为了探索镀液组分对Ni-W-P合金镀层结构与性能的影响规律，寻求合适的镀液配比，为后续实验莫定基础，采用扫描电镜／包谱、X射线衍射以及金相分析等方法，研究了不同成分和结构的化学沉积Ni-W-P合金层，测量了不同成分沉积层的镀态与热处理后的硬度。

EDS results show that the content of carbon is 7.37% in nano-diamond/Ni brush electroplated composite coating. XRD results show that as the amount of nano-diamond increases, the grain size of coatings becomes smaller.

能谱仪分析结果表明，nano-diamond/Ni复合刷镀层中纳米颗粒特征元素C的质量分数为7.37%。X射线衍射分析结果表明，随着纳米金刚石加入量的增加，镀层表面晶粒尺寸逐渐减小。

The morphology, structure and composition of the final nano-products were characterized by scanning electron microscope, energy-dispersive spectroscope and x-radial diffraction analysis.

采用扫描电子显微镜、X射线衍射、EDS能谱仪和透射电子显微镜对其表面形貌、结构和成分进行分析，结果表明所得纳米线为In2O3。

B eds, bunk beds, bedspreads and other bedroom furniture make any home comfortable and relaxing.

乙编，双层床，床罩和其他卧室家具作出任何家庭舒适和放松。

The purpose of this study was to evaluate the shear bond strength between porcelain and electroformed copings after different surface treatments, with comparison of Ni-Cr alloys, to explore the bonding mechanism through observing the electroformed coping surface and interface of metal-ceramic by SEM and EDS analysis. It will provide the basis for clinical application. PartⅠEffects of different surface treatments on bond strength of porcelain fused to eleetroformed copings Materials and Methods: Forty-five cylindrical Ni-Cr alloys were made, and gold copings were deposited on them and divided into 5 groups randomly.

本实验拟测量金沉积基底几种不同表面处理后的金瓷剪切强度，并与Ni-Cr合金进行比较；通过对不同表面处理后的金沉积基底、金瓷界面进行扫描电镜观察和能谱分析，探讨不同表面处理对金沉积金瓷结合的影响，为金沉积烤瓷修复体的临床应用提供参考依据。

The electroformed copings and interfacial area were examined by SEM and EDS analysis. Results: Surface roughness increased by sandblasting, O content had not been greatly improved by preoxidation, the coping surface formed a porous structure after applying gold bonder. The gold and porcelain combined tightly, mechanical chimera and simple diffusion of Al, O elements were observed in interfacial area.

结果：喷砂可以增加金沉积表面的粗糙度，预氧化没有使氧元素含量得到很大提高，涂布金黏结剂后金沉积表面形成了多孔样的结构：金瓷结合紧密，可见明显的机械嵌合结构，金瓷界面出现了铝、氧元素的单纯扩散。

Different surface treatments were taken on round gold surface, including no treatment, 50μm Al_2O_3 sand blasting, 110μm Al_2O_3 sand blasting, gold bonder applying after 50μm Al_2O_3 sand blasting, gold bonder applying after 110μm Al_2O_3 sand blasting, and the same nine Ni-Cr alloys were cast as contrast, the gold copings and Ni-Cr alloys were both received two layers of opaque and two layers of body porcelain. Shear tests were performed in a universal testing machine. After loading the sections were examined by SEM and EDS analysis.

第一部分金沉积基底不同表面处理对金瓷剪切强度的影响材料与方法：制作直径4.0 mm，高度为8.0 mm的圆柱形Ni-Cr合金试件45个，表面电镀形成金沉积帽状基底，随机平均分成5组，分别为表面未处理组、50μm、110μm Al_2O_3喷砂组、50μm Al_2O_3喷砂+金黏结剂组、110μm Al_2O_3喷砂+金黏结剂组；另铸造同样规格的Ni-Cr合金试件9个，作为对照。

The review on the screening assay and assessment methods of endocrine disruptors,and the transformation of the toxicology of EDs in water treatment was conducted.

对内分泌干扰物的筛检和评价方法及其毒性在水处理过程中的变化进行了综述。

Their average sizes are 48～136nm, and particles sizes are 2.3～3.4nm,about 21～40 Nickel Iron particles on per spheroid.It is also shown that in which NiFe 2O 4 and FeNi 3 were formed by analysis of XRD and EDS.

微球的平均粒径为 4 8～ 136nm ，单个微粒的粒径 2 3～ 3 4nm ，每个复合微球中约有2 1～ 4 0个铁镍粒子，X 射线衍射和X 射线能谱分析表明，主要成分为NiFe2 O4 和FeNi3。

But we don't care about Battlegrounds.

但我们并不在乎沙场中的显露。

Ah! don't mention it, the butcher's shop is a horror.

啊！不用提了。提到肉，真是糟透了。