查询词典 DMA

In this paper, aiming at solving the problem of interface and flame retardancy, on the base of our previous work, we prepared the flame retardant through the reaction of melamine and polyphosphoric acid. FTIR, XRD, DSC, DMA and SEM were used to characterize the interface and properties.

为了解决玻纤增强尼龙的界面及阻燃性能，本文采用无卤阻燃剂聚磷酸蜜胺盐MPP来制备高性能无卤阻燃玻璃纤维增强尼龙66，用FTIR，XRD，DSC，DMA和SEM等手段对材料的界面和性能进行表征。

A three-unite hydrogel that had a thermoresponsive shape memory was prepared by copolymerizing a hydrophobic monomer n-stearyl acrylate with n- undecylenic acid and acrylamide,and its structure and properties were studied by X-ray diffraction,DSC and DMA.

选用疏水性单体丙烯酸十八酯和十一烯酸以及亲水性单体丙烯酰胺制备了三元共聚凝胶P(SA-co-AM-co-HA)，通过X射线衍射、DSC、DMA等对三元凝胶的结构和性能进行了研究，发现三元凝胶形成了有序排列，这种有序排列会随着温度的变化发生可逆转变，从而使凝胶显示较好的形状记忆特性。

Seven polyimides were synthesized and their films were uniaxially stretched to observe the variation in their in-plane birefringence. The creep method of DMA was used instead in stretching the PI films. The preload force and isothermal temperature were the two controlled factors that were chosen on the basis of the lowest stretchable force and lowest temperature for each PI structure. The elongation ratio of a PI film was then decided by the stretching time.

在此是以DMA 的另一种试片拉伸方式-Creep模式，来取代之前的Stress Relaxation模式对PI薄膜试片进行拉伸实验，Creep模式是以最低的拉伸力量及最低的拉伸温度的前提下，选择Pre-load Force与Isothermal Temperature这二项为拉伸控制因素，在此状态下的PI薄膜拉伸比是取决於其拉伸的时间，此种拉伸模式将可得到较高的拉伸比，而高的拉伸比是获取较高薄膜双折射率的必要条件。

When problems arise, two or more devices are probably trying to use the same IRQ, I/O, and/or DMA.

当问题出现的时候，二或者较多的装置正在或许尝试使用相同的 IRQ 、输入／输出以及/或 DMA 。

Semi-rigid polyvinyl chlorid/carbon blackcomposites were prepared, their properties were studied by SEM, stress-strain behavious, surface resistivity,DMA and Vica soften temperature tests.

通过SEM、拉伸断裂行为、表面电阻、DMA和维卡软化温度测试，研究了半硬质PVC/炭黑材料力学性能、电性能、热性能和微观形态。

Three fullerene derivatives including a bisadduct of tetraethyl methano[60] fullerenediphosphona- te、a dimalonic acid[60]fullerene (DMA C60and fullerol were used to study the relationship between their photo-induced GSH depletion and structures.

采用二加成亚甲基富勒烯[60]二膦酸四乙酯、二加成富勒烯[60]丙二酸(DMA C60)和富勒醇 3种富勒烯衍生物研究富勒烯衍生物的结构与光诱导细胞内GSH耗竭的关系。

It makes possible to change the acoustic tuning of disk, to include or to disconnect the caching of forestalling reading/record, to change the reflected capacity of hard disk, to switch the maximum rating of work ultra DMA (ATA 33/66/100/133), to change tuning the energy consumption of hard disk, and to also show the current temperature of disk and data SMART It works not only with the hddof producers pointed above.

它使可能改变声微调的磁盘，包括或断开缓存预先读/纪录，改变反映能力的硬盘，切换的最高评级工作超的DMA （阿拉木图66分之33 / 133分之100 ），改变调整能源消费的硬盘的，并且也显示当前温度的磁盘和数据的智能工程，它不仅与硬盘生产商指出，以上。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

Three initiators, ammonium persulfate / DMA, ammonium persulfate / urea / ammonia liquor, ammonium persulfate / triethanol amine were applied to the polymerization at 50癈, 55 癈 and 60癈, and the influence of ratio oxidant / reductant on reaction rate and molecular weight of polymer were studied.

本文研究了过硫酸铵／DMA、过硫酸铵／氨水／尿素、过硫酸铵／三乙醇胺三种引发体系在50、55、60℃下，不同氧化剂、还原剂配比条件对反应速率、分子量的影响。

The DMA controller may read a data structure, referred to as a 'buffer descriptor block,' to perform the data transfer.

所述DMA控制器可以读取一个称为&缓冲区描述符块&的数据结构以便执行所述数据传送。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。