查询词典 CAM

It absorbed the merits of different mechanical structures, applied the mechanic principles of folk waterwheel, barrel car, as well as shaduf, cam, and balance weigh beam, and thus was an automatic observatory, which had the multi function of observation, demonstration and time giving, and it gained or lost no more than one second per day. It was the ancestor of the mechanical clocks, since

它吸取各家机械结构之长，采用民间水车、筒车，以及桔槔、凸轮、天平秤杆等机械原理，是集观测、演示和报时为一体的自动化天文台，精确度已达到误差每日一秒，更因为采用了早期的擒纵机构，成为机械钟的祖先。

It should be noted that if you do need to use this setting, your cam will likely take a picture every time Dorgem "reconnects" to it, so try using 5 minute intervals.

应该指出的是，如果您确实需要使用此设置时，您的凸轮可能会拍摄一张照片，每时间dorgem &重新&，所以尝试使用5分钟的间隔时间。

The following cases, to go with locator: 1, medium pressure high pressure big time; 2, valve diameter is large Forged Gate, Globe, Check Valves (DN 00); 3, high or low temperature control valve; 4, the action necessary to raise the speed control valve; 5, using standard signal, the operation of non-standard spring when the implementing agency (20 ~ 100KPa spring outside the range); 6, when used for sub-process control; 7, when the valve to achieve the reverse action (air to close each open-type gas conversion); 8, need to change the valve's flow characteristic time (you can change the positioner cam); 9, no spring actuator or piston actuator, the proportion of action to achieve the time; 10, electrical signals to operate pneumatic actuator must Distribution - gas valve positioner.

下列情况下，要配定位器： 1、介质压力高、压差大的时候； 2、调节阀口径大时（DN00）； 3、高温或低温调节阀； 4、需要提高调节阀的动作速度时； 5、用标准信号、操作气动管路截止阀非标准弹簧的执行机构时（20～100KPa以外的弹簧范围）； 6、用于分程控制时； 7、使阀门实现反向动作时（气关式和气开式互相转换）； 8、需要改变阀的流量特性时； 9、无弹簧执行机构或活塞执行机构，要实现比例动作时； 10、用电信号去操作气动执行机构时，必须配电-气阀门定位器。

The following cases, to go with locator: 1, medium pressure high pressure big time; 2, valve diameter is largeForged Gate, Globe, Check Valves (DN 00); 3, high or low temperature control valve; 4, the action necessary to raise the speed control valve; 5, using standard signal, the operation of non-standard spring when the implementing agency (20 ~ 100KPa spring outside the range); 6, when used for sub-process control; 7, when the valve to achieve the reverse action (air to close each open-type gas conversion); 8, need to change the valve''s flow characteristic time (you can change the positioner cam); 9, no spring actuator or piston actuator, the proportion of action to achieve the time; 10, electrical signals to operate pneumatic actuator must Distribution - gas valve positioner.

下面所开列情况下，要配定位器：一、介质压力高、压差大的时辰； 2、调节阀口径大时（DN00）； 3、高温或低温调节阀； 4、需要提高调节阀的动作速度时； 5、用标准旌旗灯号、操作气动管路截止阀非标准弹簧的执行机构时（20～100KPa以外的弹簧范围）； 6、用于分程节制时；七、使阀门实现逆向动作时（气关式和气开式互相转换）； 8、需要改变阀的流量特性时；九、无弹簧执行机构或活塞执行机构，要实现比例动作时； 10、用电旌旗灯号去操作气动执行机构时，必须配电-气阀门定位器。

The bimetal bushing for spring bush , piston pin , rocker arm , connecting rod , cam shaft , balance shaft and other applications of bimetal bushings .

双金属轴承应用于：弹簧销，活塞销，摇臂，连杆，凸轮轴，平衡轴等部件。

Synchronous, cam plate,electronic gear, virtual line, automatic procedures.compact plus tight enhanced power scope

如定位、角同步、凸轮盘、电子齿轮、虚拟主轴、自动程序等。compact plus 紧凑加强型功率范围：0.5～18.5kw。

A new way of exchange between rotation and reciprocating motion through planetary driving was introduced, which was different from the one realized by piton pump moving with cam, brace and link.

采用行星齿轮传动方式实现从旋转到直线的往复运动，不同于现有柱塞泵由凸轮、曲柄连杆或斜盘实现往复运动的方式，没有滑靴等高压力作用下高速滑移的元件。

Kinematic and dynamic calculations are carried out, and the features of intake and outtake valve train are got. Especially, the area of fullness ratio of the valve lift curve, cam to tappet contact stress, lubrication coefficient and the features of valve seating are analyzed.

在此基础上分析了配气机构进排气部分的工作特性，着重从气门升程曲线的丰满系数、凸轮与平面挺柱间接触应力，凸轮与平面挺柱间润滑效果以及气门落座特性等方面进行了分析。

It is engaged in developing,designing,producing and selling high and medium grade PVC high polymer paint-free decorative board and profile,high polymer interior door and Luxurious steel-wood interior door.

建有CAD/CAM模具设计系统和计算机中心、IBM RS/6000工作站，使产品从设计、工艺编程、工序加工、销售网络均实行计算机控制管理，从而保障了产品在同行业的领先水平。

By the accident analysis,it is known there shall be a corresponding on-cam relationship between wicket gate opening limitation and requirement of spring force.

通过事故分析，提出对导叶开度限制及弹簧力要求并相应协联关系、主令控制器、监控控制都要设置得当，相应配合，否则易突发事故影响机组正常运行。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。