查询词典 A. M.

The results show that the dynamic force and thermal conditions of forming the squall line were the convergence of cold air from Mongolia cold vortex and the warm-humid air current before west trough to form the convectional system at moderate 3 scale; the rapid development and southward shift of MβCSs was caused by a strong unstable stratification and the shear line of suitable vertical wind; a heavy hail occurred after a vertical liquid water content over 65 kg/m^2 was firstly measured by weather radar; a sharp reduction of VIL indicates that a disaster strong wind will occur at soon.

结果表明：蒙古冷涡旋转下甩冷空气与西风槽前的暖湿气流汇合，形成中p尺度的对流系统是飑线形成的前期动力和热力条件；强的不稳定层结和合适的垂直风切变导致了MβCSs的迅速发展和南压；在天气雷达首次观测到垂直液态水含量值超过65kg/平方公尺后2h内出现了大冰雹；垂直液态水含量的突然减小标志着灾害性大风的开始。

Test results of EMP-steel frictional pairs showed that the wear rate h of EMP, press p andvelocity v are suited to equations separately: h =m .p n and h =a .v b.

试验证明EMP复合材料瓦与钢对磨时的磨损率h与压力p、速度v之间分别满足h=m.pn和h=a.vb关系式，给出了相应系数m、n、a、b的值；磨损率与钢试件表面粗糙度Ra之间满足h=A·RaB关系式，给出了A、B的有效范围值。

E . As shown, a wheel of weight W and radius 0.8 m is placed against a 0.3 m height rectangular block fixed on the ground.

如图所示。一重量为W 半径为0.8 m的轮子放在0.3 m高的固定方砖前。

This p a per introduces a method of the electronic be a m flow controlling of the electron be a m welding m a chine by using V/F a nd F/V converter.

介绍把V/F及F/V转换器作为电子束焊机束流控制方式的研究，实现了焊接束流的快速控制，提高了电子束流的稳定性及可靠性。

Cadillac Model M. In 1907, Cadillac offered two distinct touring car body styles for the Model M series: the elegant Victoria Light Touring Car and this "Straight" Light Touring Car. Both were powered by the single-cylinder Cadillac engine and priced at $950, or $1,025 with a top. In 1908, three Model M Runabouts similar to this touring car were randomly selected to prove that the precision manufacturing methods employed by Cadillac guaranteed complete interchangeability of parts.

1907年，凯迪拉克品牌为旗下的M系列车型提供了两种不同的车身设计：优雅风格的四轮折蓬式车型和直线型敞蓬车，这两种车型都配备了凯迪拉克的单缸发动机，售价从 950美元到1025美元。1908年，和这款四座敞蓬车相似的三款M型小型单座敞篷车的出现充分证明，凯迪拉克品牌的精密制造工艺和标准化的零部件生产，确保了汽车零部件可在不同车型之间交替使用。

Initially, one specimen is tested at an irradiance of 25kW/m in the presence of a pilot flame and one specimen is tested at an irradiance of 25kW/m in the absence of a pilot flame to determine the mode which gives the quickest rate of smoke production.

首先，把一个样品用带有引燃火焰的25KW/m 的辐射进行测试，另外再用不带引燃火焰的25KW/m 的辐射进行测试，并用此来确定最快产生烟的一种方法。

In this study, a commercial CAD/CAM Software is used to plan and generate the multi-axis tool path, and a table rotating/tilting type five-axis machining center is used to perform the experimental machining operation. The material of the die studied is NAK 80 die tool steel, and the geometries are modeled as concave and convex spherical surfaces. Milling parameters considered are spindle speed, feed rate, and different types of cutting tool path. The experimental results show that the surface roughness for concave spherical surface is about 0.247 μm and roundness is about 0.0283 mm and the surface roughness for convex spherical surface is about 0.250 μm and spherical roundness is about 0.0551 mm under the cutting conditions mentioned in this study.

本研究的实验方法与步骤包括利用商用CAD/CAM系统针对实验对象规划三轴/五轴同动加工路径，并经后处理程式转换，在本实验室之平台倾斜/旋转型之五轴加工机上进行实验，实验对象为NAK80模具钢材料之凹与凸球形曲面之加工，此外考虑的切削条件有主轴转速、进给速度、加工路径等，在本研究所设定之最佳切削条件下，凹球形曲面之真圆度约为0.0283 mm，粗糙度为0.247 μm，而在相同切削条件下，凸球形曲面之真圆度为0.0551 mm，粗糙度为0.250 μm。

A polycapillary X-ray lens with spot size of 41.7 μm was applied to focus original X-ray and a slit of 50 μm was located in front of the detector to improve angle resolusion.

为了提高入射X射线的强度并提高系统的空间分辨率，选用焦斑为41.7 μm的会聚透镜对原级X射线进行会聚，并在探测器前加上50 μm的狭缝以提高掠出射角扫描的角度分辨率。

A boot-type jet trenching system is adopted which is towed by the supporting ship. It is mainly used for trenching hard sandy clay at the shoal area with water depth 0.8 m to 30 m. Diameter of the cable to be buried is up to 150 mm, and the burying depth more than 2 m. This system has advantages of simple structure, high burying speed and great trenching depth.

该系统采取滑靴型式的喷冲挖沟方式，埋缆机由母船拖曳前进，主要用于水深在0.8～30 m的滩海，底质为硬砂土和红胶泥层，埋设直径小于150 mm的电缆，埋设深度大于等于2 m。

The apparatus comprises a first RF switch separating a received signal into N communication services; M diplexers associated with the communication services, for separating a signal received from the first RF switch into a call signal and a TV signal; a second RF switch for applying the TV signal received from the diplexers to a TV tuner; and a controller for controlling an overall operation of the multimode mobile phone and controlling the first RF switch and the second RF switch according to the received signal.

该设备包括第一射频开关，用于将所接收到的信号分离成N个通信服务；M个双工器，该M个双工器与通信服务相关，用于将从第一射频开关所接收到的信号分离成呼叫信号和电视信号；第二射频开关，用于将从双工器所接收到的TV信号提供给TV调谐器上；以及控制器，用于对多模式移动式电话的整个操作进行控制并且根据所接收到的信号来控制第一射频开关和第二射频开关。

But we don't care about Battlegrounds.

但我们并不在乎沙场中的显露。

Ah! don't mention it, the butcher's shop is a horror.

啊！不用提了。提到肉，真是糟透了。