- 更多网络例句与预先加工相关的网络例句 [注：此内容来源于网络，仅供参考]
-
It is sometimes so treated prior to processing into edible product by bleaching and deodorization.
用它加工食品时，有时需要预先进行漂白和脱味处理。
-
The paper focuses on the construct design, machining and assembling of modules. The methods for module function tests are explained, the results of tests testify the modules performance accord with the demands on them. Three kinds of reconfigurations are discussed: snake reconfiguration, pedrail reconfiguration and four-footed reconfiguration.
论文着重论述可以手动完成对接的模块的结构设计，包括三个部分的具体设计思想和方法，以及模块的加工和装配过程，说明模块功能的测试方法，测试结果表明模块性能符合预先设计的要求。
-
The company has expanded its product portfolio by moving into added value commodities, such as pre-packed or processed vegetables for the foodservice market, and has recently established a factory on its site for preparing jams and conserves, which are sold to supermarkets, butchers, delis and farm shops.
该公司已扩大其产品组合的迁入附加值商品，如预先包装或加工蔬菜的食品市场，最近成立了一个工厂在其网站上编写堵塞和保存，这是出售给超市，屠夫，熟食店和农产品商店。
-
In the traditional Precision casting, the wax pattern needs to be pre-produced by using steel or aluminum mold. Producing mold is usually very difficult, which takes a long time. Particularly when there is some complex surface in the mold, advanced machining center is needed and the production costs will be greatly increased.
在传统铸造工艺中，为了得到蜡模需要预先生产钢制或铝制的模具，而制造模具通常是很困难的，生产周期很长，尤其是当模具上有很复杂的曲面时需要用先进的加工中心才能制造，将大大提高整个工艺的成本。
-
According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.
根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。
-
"The edible starchy grain is used primarily as livestock feed, but is also processed into rolled oats and oat flour for human consumption."
适应贫瘠土壤。燕麦主要作饲料，但加工后的燕麦片和燕麦粉供人类食用。用它加工食品时，有时需要预先进行漂白和脱味处理。
-
A number of digital business card printing and membership card manufacturing process requires the use of printer materials must be made in advance, and in the business card printing and membership card when you are finished, but also making special processing of ornament and q311777 business card printing and membership card making product acts as a mechanical and physical protection is used in the finishing of ink or stains are very expensive, finishing will increase business card printing and membership card product cost.
许多数码制卡和会员卡制作工艺要求使用的承印材料必须进行预先处理，而在制卡和会员卡制作完成之后，还要进行专门的整饰加工，以便对制卡和会员卡制作品起到机械的和物理的保护作用，这些整饰工艺中使用的油墨或着色剂都是很昂贵的，整饰工艺会增加制卡和会员卡制作产品的成本。
-
Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.
根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS
-
The models can be used in the estimation of the reliable operation ranges of capacitive accelerometers.
该模型可望应用于实际有加工偏差的微加速度计可靠工作范围预先评估与设计。
- 更多网络解释与预先加工相关的网络解释 [注：此内容来源于网络，仅供参考]
-
pre-production：试制
pre-processing 预先加工 | pre-production 试制 | pre-programmed 预定程序的
-
pre process：预先加工
pre-overhaul trial 大修前试验 | pre-process 预先加工 | pre-processing 预先加工
-
predigestion：预消化
predigestingfeed 预消化饲料 | predigestion 预消化 | predigestionofdata 数据的预先加工 数据预先加工
-
predigestion of data：数据预先加工
predictor 预示校正法,预测校正法 | predigestion of data 数据预先加工 | predip 预浸渍
-
predigestion of data：数据的预先加工,数据预先加工
predifferentiation stage 前分化期 | predigestion of data 数据的预先加工,数据预先加工 | predischarge 预放电,预排气
-
prefinish：预加工
prefiner 热磨机 | prefinish 预加工 | prefire 预先点火
-
preformation：预先形成;预先成型
preform 预先形成;预先决定;初步加工;预先成型 | preformation 预先形成;预先成型 | preformed wire rope 预成型钢索
-
Preprocess：预加工,预先处理
preprinting 预印 | preprocess 预加工,预先处理 | preprocessed text 预处理文本,预加工正文
-
hot stamping：烫印
热烫印(Hot Stamping)是通过加温及压力,把预先涂在载体箔膜的涂层转印在被装饰的产品上. 此转印过程因应需要被装饰产品的造型,而分成三个加工工艺,分别是传统热烫印...
-
waxing：上蜡
简介 上蜡(waxing)是在加工平订书时在配页前,将所配书册的首帖(第一帖最小号)或尾帖(最末一帖的最大号)的订缝边上涂一层预先调制好的蜡液的加工操作. 上蜡主要是为了浆背后易分本. 相关条目 装订 书籍 ...