- 更多网络例句与钢制相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Derives the formulae for calculating the distortion and stress on the acting surface of flexspline load in the drive process of the harmonic gear drive with three-wave wavegenerator;(2) analyzes and compares the performance of plastic and steel products under light load drive and calculates the probably reached limit of drive ratio for both types of flexsplines under the same load;(3) applies the harmonic gear drive with three-wave wavegenerator to the small-sized multiple-revolution electric device of valves by taking into consideration of the low limit of the drive ratio for the harmonic gear drive with three-wave wavegenerator made of plastics, improves the design on the main drive mechanism of the traditional small-sized multiple-revolution electric device of valves, and validates through examples the feasibility for the harmonic gear drive with three-wave wavegenerator made of plastics to be applied to the small-sized multiple-revolution electric device of valves. Finally the author performs calculations on the two types of the flexsplines of the harmonic gear with three-wave wavegenerator by using the finite element method and analyzes the causes for the errors.
本文根据三波谐波齿轮传动的运动变形特点，采用弹性薄壳的力矩理论，推导了三波谐波齿轮传动柔轮载荷作用面上的变形及应力计算公式；分析比较了轻载传动情况下塑料和钢材的性能，计算了塑料制谐波柔轮和钢制谐波柔轮在相同载荷情况下可能达到的传动比极限；对塑料制及钢制三波谐波齿轮柔轮进行了有限元计算，分析了产生误差的原因；针对三波塑料谐波齿轮传动比极限低的特点，将之运用于小转矩多回转阀门电动装置中，对传统的小型多回转阀门电动装置的主传动机构进行了改良设计，并通过实例验证了三波塑料谐波齿轮传动在小转矩多回转阀门电动装置中应用的可行性。
-
It is a modern plant to produce Steel Filing Cabinet, Pseudoclassic Steel Cabinet, Safe, Concentrated Archives Cabinet, Periodical Cabinet, Desk, Microcomputer Desk, Theft proof Treasury Gate, Family Theft proof Door, etc.
海城市兴顺金柜制造有限公司是专业生产"兴元"牌办公系列，钢制文件柜、仿古钢制柜、保险柜系列，密集档案柜，期刊柜、办公桌、防盗金库大门，家居系列防盗门等系列产品的现代企业。
-
This design uses pressure vessel's convention design method, rests on present GB150-1998 "Steeliness Pressure vessel" JB4710-2005 "Steeliness Tower system Vessel" the standard and "Pressure vessel Safety work Supervision Regulations" and so on technical laws and regulations carries on.
本次设计采用压力容器的常规设计方法，依据现行的GB150-1998《钢制压力容器》JB4710-2005《钢制塔式容器》标准和《压力容器安全技术监察规程》等技术法规进行。
-
Function: Fan of glass reinforced plastics is in acceded after the good performance of steeliness, increased corrosion resistance to be able to spend function with explosion proof, fire prevention again, those who make use is more extensive, housing, impeller all pledges for FRP material, pedestal adds epoxy resin for steeliness anticorrosive processing.
质量： 玻璃钢风机在承继了钢制的美好质量而后，又增多了耐侵蚀质量和防暴、防火苗质量，让它的用处更为普遍，壳体、叶轮都是FRP材料，支座为钢制加环氧树脂防止腐败安排。
-
This system adopts unique patent "the integral orbit weighing system",(patent number: 03277805.8) whose steel frame can be placed levelly on the crushed stones way or railroad to weigh various large calculating equipments, and can weigh the size of top dynamic loading, passing microcomputer to figure out data, and data store, statistics, net-connecting and auto printing.
采用独特专利&一体化称量轨&，（专利号：03277805.8），利用剪切应变取代正压应变，衡区采用钢制框架线路，钢制框架平放在碎石道床上，安装在铁路线上，对铁路各种货车进行动态连挂称重的大型计量设备，它能准确地检测到称重轨上动态载荷的大小，通过微机，计算出各种等数据，并可完成数据自动储存显示、统计、联网、打印等多项功能。
-
Secondly, in this paper, in order to carry out a fair assessment of the reinforcement design on spherical shell with transnormal nozzle, a comparison of reinforcement method was done between JB4732-1995 Steel Pressure Vessels桪esign by Analysis appendix A4 and HG20582-1998 Specification for Stress Calculation of Steel Chemical Vessels.
其次，为了对球壳超标开孔接管结构的补强设计方法作出比较公正的评价，本文对我国JB4732-1995《钢制压力容器——分析设计标准》附录A4中根据塑性极限分析的完全解得到的超标开孔补强设计方法和HG20582-1998《钢制化工容器强度计算规定》中的压力面积法进行了计算比较。
-
According to Steely Pressure Vessels GB150-89, Shell and Turb exchangers GB151-89 and the relevant design standard, the software has been developed using Turbo Pascal language.
软件按钢制压力容器GB150，钢制管壳式换热器GB151及有关规范设计。
-
Company's main products: steel butterfly valves, valve dumping ash, steam injection metal hardware sealed off valve, soft sealed off valve, high-temperature steel butterfly valves and air hoist, the chute and transportation, such as permanent magnet Separators Series, manual, electric, pneumatic and hydraulic power, electricity, gas linked variety of ways, such as drive, widely used in building materials, cement, metallurgy, steel, glass, petrochemicals, light industry, electricity, food, timber , Tobacco, industrial gas, coking, and other industry supporting infrastructure projects, some products are exported overseas.
公司生产的主要产品有：钢制蝶阀、卸灰阀、蒸汽喷吹型金属硬密封蝶阀，软密封蝶阀、钢制高温蝶阀和空气提升机、输送斜槽和永磁除铁器等系列，手动、电动、气动、电液动、电、气联动等驱动方式一应俱全，广泛应用于建材、水泥、冶金、钢铁、玻璃、石化、轻工、电力、粮食、木材、烟草、工业燃气、焦化等行业基本建设工程的配套，部分产品远销海外。
-
Normative references GB 150 steel pressure vessel GB 152.1 ~ 152.4 fastener hole and Shen Kong GB 196 commonDast Gate Valves thread of basic dimensions (diameter l ~ 600mm) GB 197 common thread of tolerance and fit (diameter of 1 ~ 355mm) GB 798 live bolt GB 897 stud bm = ld GB 898 stud bm = 1.25d GB 901 Dlass B and other long stud GB 5782 Hexagon head bolts B and B class GB 5796.1 ~ 5796.4 Dl 150, 300, 600 Lb Dast Steel Gate Valvestrapezoidal thread GB 6175 2 Hexagon nut B and B class GB 9112 types of steel pipe flanges GB 9113.1 ~ 9113.26 Integral steel pipe flanges GB 12220 Universal Valve Logo GB 12221 length of theDl 900, 1500 Lb Dast Steel Gate Valves valve structure of metal flange GB 12222 Multi-turn valve actuator attachment GB 12224 General requirements for steel valves GB l2228 General Valve carbon steel forgings GB 12229 Universal Valve carbon steel castings GB 12230 Universal Valve austenitic steel castings GB / T 12252 General requirements valve supplier ZB Jl6 006 test and test valve 原文来源:http://www.1zhafa.com
引用标准 GB 150 钢制压力容器 GB 152.1～152.4 紧固件通孔及沉孔 GB 196 普通螺纹基本尺寸(直径l～600mm) GB 197 普通螺纹公差与共同(直径1～355mm) GB 798 活节螺栓 GB 897 双头螺柱bm＝ld GB 898 双头螺柱bm＝1.25d GB 901 等长双头螺柱 B级 GB 5782 六角头螺栓 B和B级 GB 5796.1～5796.4 梯形螺纹 GB 6175 2型六角螺母 B和B级 GB 9112 钢制管法兰类型 GB 9113.1～9113.26 整体钢制管法兰 GB 12220 通用阀门标记 GB 12221 法兰连接金属阀门结构长度 GB 12222 多回转阀门驱动装配的连接 GB 12224 钢制阀门一般要求 GB l2228 通用阀门碳素钢锻件技术条件 GB 12229 通用阀门碳素钢铸件技术条件 GB 12230 通用阀门奥氏体钢铸件技术条件 GB/T 12252 通用阀门供货要求 ZB Jl6 006 阀门的试验与检验
-
Normative references GB 150 steel pressure vessel GB 152.1 ~ 152.4 fastener hole and Shen Kong GB 196 common Cast Gate Valves thread of basic dimensions (diameter l ~ 600mm) GB 197 common thread of tolerance and fit (diameter of 1 ~ 355mm) GB 798 live bolt GB 897 stud bm = ld GB 898 stud bm = 1.25d GB 901 Class B and other long stud GB 5782 Hexagon head bolts A and B class GB 5796.1 ~ 5796.4 Cl 150, 300, 600 Lb Cast Steel Gate Valves trapezoidal thread GB 6175 2 Hexagon nut A and B class GB 9112 types of steel pipe flanges GB 9113.1 ~ 9113.26 Integral steel pipe flanges GB 12220 Universal Valve Logo GB 12221 length of the Cl 900, 1500 Lb Cast Steel Gate Valves valve structure of metal flange GB 12222 Multi-turn valve actuator attachment GB 12224 General requirements for steel valves GB l2228 General Valve carbon steel forgings GB 12229 Universal Valve carbon steel castings GB 12230 Universal Valve austenitic steel castings GB / T 12252 General requirements valve supplier ZB Jl6 006 test and test valve
引用标准 GB 150 钢制压力容器 GB 152.1～152.4 紧固件通孔及沉孔 GB 196 普通螺纹基本尺寸(直径l～600mm) GB 197 普通螺纹公差与配合(直径1～355mm) GB 798 活节螺栓 GB 897 双头螺柱bm＝ld GB 898 双头螺柱bm＝1.25d GB 901 等长双头螺柱 B级 GB 5782 六角头螺栓 A和B级 GB 5796.1～5796.4 梯形螺纹 GB 6175 2型六角螺母 A和B级 GB 9112 钢制管法兰类型 GB 9113.1～9113.26 整体钢制管法兰 GB 12220 通用阀门标志 GB 12221 法兰连接金属阀门结构长度 GB 12222 多回转阀门驱动装置的连接 GB 12224 钢制阀门一般要求 GB l2228 通用阀门碳素钢锻件技术条件 GB 12229 通用阀门碳素钢铸件技术条件 GB 12230 通用阀门奥氏体钢铸件技术条件 GB/T 12252 通用阀门供货要求 ZB Jl6 006 阀门的试验与检验
- 更多网络解释与钢制相关的网络解释 [注：此内容来源于网络，仅供参考]
-
Steel Beaker：钢制烧杯
Steel Baseplate 钢座板 | Steel Beaker 钢制烧杯 | Steel Beam 钢梁
-
Cookie Cutter：圆底形钢制沉箱(用作桥墩基础)(俚语)
concrete cutter 混凝土切割机 | cookie cutter 圆底形钢制沉箱(用作桥墩基础)(俚语) | core cutter 取[土]样器
-
steel costumer：柱式钢制衣架
steel cord conveyor belt 钢丝绳输送带 | steel costumer 柱式钢制衣架 | steel crossarm 铁横担
-
steel desk：钢制写字台
steel chair 扶手椅 | steel desk 钢制写字台 | steel safe 保险柜
-
Steel File Cabinet：钢制卷宗柜
steel figure punch 数字钢冲子 | steel file cabinet 钢制卷宗柜 | steel file kit 套装钢锉
-
Integral steel pipe flanges with tongue and groove face：榫槽面整体钢制管法兰
凹凸面整体钢制管法兰 Integral steel pipe flanges with male a... | 榫槽面整体钢制管法兰 Integral steel pipe flanges with tongue and groove face | 环连接面整体钢制管法兰 Integral steel pipe flanges with ...
-
Hubbed slip-on-welding steel pipe flanges with tongue and groove face：榫槽面带颈平焊钢制管法兰
凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding st... | 榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel pipe flanges with tongue and groove face | 环连接面带颈平焊钢制管法兰 Hubbed slip-on-weldin...
-
Hubbed socket welding steel pipe flanges with tongue and groove face：榫槽面带颈承插焊钢制管法兰
凹凸面带颈承插焊钢制管法兰 Hubbed socket welding s... | 榫槽面带颈承插焊钢制管法兰 Hubbed socket welding steel pipe flanges with tongue and groove face | 环连接面带颈承插焊钢制管法兰 Hubbed socket weld...
-
glass steel window：玻璃钢制门、窗
C190032 玻璃钢建筑构件 glass steel building pieces | C190030 玻璃钢制门、窗 glass steel window | C190031 玻璃钢制天花板 glass steel ceiling
-
glass steel ceiling：玻璃钢制天花板
C190030 玻璃钢制门、窗 glass steel window | C190031 玻璃钢制天花板 glass steel ceiling | C190029 玻璃用建筑材料(不包括卫生设备) glass material