金属工

基本解释 (translations)

metalworking

与金属工相关的网络例句 [注：此内容来源于网络，仅供参考]

And also metal material's corrosion form and method of anticorrosion are analyzed. The review still includes water chemistry's function, principle, type and characteristic in utility boiler. And the dissertation's studying direction, content and method are determined against the current existing problem of water chemistry of utility boiler. 2. High temperature potential-pH equilibrium diagram's application and high temperature solution's practical pH calculation The application method of high temperature potential-pH equilibrium diagram and solution's practical pH at high temperature are analyzed and calculated.

本文所做的主要研究工作有：一、火力发电站热力系统防腐综述及论文研究方向与内容在查阅大量国内外文献和资料，并结合多年来工作和研究经验的基础上，对火力发电站热力系统的组成、工作环境、常用金属材料、常见腐蚀形态、常用腐蚀控制方法以及电站锅炉水化学工况的作用、原理、类型与特点等作了全面深入的分析和总结，并针对目前电站锅炉水化学工况应用中存在的问题，提出了本文的研究方向、内容和方法。

Because the metal melt fluid washes outthe furnace lining unceasingly as the metallurgy smelting, the different furnace lining material, the furnace lining smelting life is dissimilar, so power frequency furnace is also same as any other type smelting when they are manufactured, not equiping with furnace lining material, the using factoryshould have the professional furnace lining technical personnel and furnaceman.

由于冶金熔炼时，金属熔液不断冲刷炉衬，不同的炉衬材料，炉衬熔炼寿命也不一样，不同的金属所适应的炉衬材料也不一样，所以工频炉出厂也同任何种类熔炼出厂一样，不配备炉衬材料，使用厂应备有专职的炉衬技术人员和筑炉工。

Because time metallurgy smelting, the metal melt fluid washes out the furnace lining unceasingly, the different furnace lining material, the furnace lining smelting life is dissimilar, the different metal adapts the furnace lining material is dissimilar, therefore power frequency stove leaving the plant is also same as any type smelting leaving the plant, does not provide the furnace lining material, the use factory should have the professional furnace lining technical personnel and build the furnaceman.

由于冶金熔炼时，金属熔液不断冲刷炉衬，不同的炉衬材料，炉衬熔炼寿命也不一样，不同的金属所适应的炉衬材料也不一样，所以工频炉出厂也同任何种类熔炼出厂一样，不配备炉衬材料，使用厂应备有专职的炉衬技术人员和筑炉工。

Because time metallurgy smelting, the metal melt fluid washes out the furnace lining unceasingly, the different furnace lining material, the furnace liningsmelting life is dissimilar, the different metal adapts the furnace lining material is dissimilar, therefore power frequency stove leaving the plant is also same as any type smelting leaving the plant, does not provide the furnace lining material, the use factory should have the professional furnace liningtechnical personnel and build the furnaceman.

由于冶金熔炼时，金属熔液不断冲刷炉衬，不同的炉衬材料，炉衬熔炼寿命也不一样，不同的金属所适应的炉衬材料也不一样，所以工频炉出厂也同任何种类熔炼出厂一样，不配备炉衬材料，使用厂应备有专职的炉衬技术人员和筑炉工。

Furthermore, Taiwan's metal industry had lost its soul, not only becoming immutably making standard products and counterfeits, but also performing the mass production for foreign companies.

除了杨英风艺术大师的创作外，反观台湾在日据时代过后并未能见到金属工艺的长足精进，台湾本土的金属工艺品并未被社会所重视，大众总是偏爱外国产品，从贵重首饰、家俱摆饰到户外景观随处可见进口货，而台湾的金属工业也失去了自我的灵魂，除了一味地制造一成不变的标准品及仿冒外，要不就是成为外国厂商的代工者，而精致金属工艺则往往只能见於各个艺术家个人的表现。

The young Hugo Schneider had become proficient as a metalworker, and in 1863 he became involved in a small business, making products from sheet metal in Leipzig, south west of Berlin.

年轻人雨果谢德变得熟练作为金属工，在1863年，并且他变得介入一家小企业，做产品由金属板在莱比锡，在柏林西边的南部。

Water inside vacuum heat- collection tubes; since the hot medium inside vacuum tubes floats up and cold one goes down due to respective specific gravity, hot and cold mediums convections up and down to cause the heat conduction, furthermore transfer the heat to the related working medium in the heat tubes, the working medium sorbs the potential heat and becomes steam to rise up to the condensing section from the tube heat evaporating section; it emits the heat in condensing section to change again into liquid working medium; it flows back to evaporating section under the gravity action, the emitted heat is transferred into the water inside water tank or tube group by means of the heat-conduction through heat tubes condensing section; it makes the cold water in water tank into hot water in the repeated way.

阳光透过全玻璃真空集热管的外玻璃，照射到涂覆在内玻璃管外表面的选择性吸收涂层上，涂层将太阳的辐射能吸收并转化为热能，通过内玻璃管壁导热，传递给真空集热管内其液态传热介质，由于真空集热管内热的介质因比重小而上浮，冷的介质因比重大而下沉，冷热介质上下对流传热和导热，再通过热管的金属壁导热，将热量传递给热管内其相变工质，工质吸收汽化潜热而变成蒸汽，由热管蒸发段上升到冷凝段，在冷凝段放热冷凝，又变成液态工质，在重力作用下流回蒸发段，所放出的热量通过热管冷凝段金属管壁导热，传递给水箱或联集管内的冷水，周而复始，于是便将水箱内的冷水全部加热成热水。

In this model, the velocity was controlled below50 m /s so that it is easy that the temperature of outlet propellant exceeds 1000K. By the measure of advancing the melting point of metal panel to 3000K, the temperature of outlet propellant even could be close to the very high temperature of the metal panel. It is very active to improve the capability of the whole propulsion system.

在本文模型中，将管道内工质的流速控制在50 m /s ，热交换器的出口工质温度就能够提升至1000K以上；提高换热器高温加热段的金属平板熔点到3000K以上，完全可以将工质出口温度提升至接近金属平板的温度，这样可以大幅度提高推进系统的性能。

Study engineering drawings and blueprints, determine the materials required, and plan the sequence of tasks to cut metal most efficiently · Construct patterns and templates as guides for layouts · Lay out reference points and patterns on heavy metal according to component specifications · Rig, hoist and move materials to storage areas or within worksite · Assemble and fit metal sections and plates to form complete units or subunits using tack welding, bolting, riveting or other methods · Set up and operate various heavy-duty metal-working machines such as brake presses, shears, cutting torches, grinders and drills, including computer numerical control equipment, to bend, cut, form, punch, drill or otherwise form heavy-metal components · Install fabricated components in final product.

研究机械制图和图纸，决定所需材料，并计划工作顺序，有效地切割金属。 2。构建模式和模板作为布局向导 3。按照组件规格在重金属上设计参考点和模型 4。装备、起重机和运输材料入库或在工地场内 5。组装和安装金属部件和板材形成全套装置，或通过点焊、螺栓连接，铆接法或其他方法形成次单元。 6。建立并操作各种重金属加工机床，例如压弯机、剪床、割炬、磨钻机，包括数控设备，压弯、切割、成型、打洞、钻孔，或相反形成重金属组件。 7。在成品上安装已制造好的组件 Structural metal and platework fabricators and fitters 结构金属和板金加工制造工和安装工

At the first, the properties of various of liquid metal working fluids were studied in detail.

本文首先全面地分析了各种液态金属工质的特点，探讨了高温热管常用和一些有应用前景的工质。

与金属工相关的网络解释 [注：此内容来源于网络，仅供参考]

metalfabricator,boilermaker：金属装配工(锅炉工)

23.medicaldiagnosticradiographer放射科医生 | 24.metalfabricator,boilermaker金属装配工(锅炉工) | 25.metalfitter金属装配工

Metal Fabricator, Boilermaker：金属制造工、锅炉制造工

2391-11 Medical Diagnostic Radiographer 医疗诊断放射医师 | 4122-11 Metal Fabricator, Boilermaker 金属制造工、锅炉制造工 | 4112-11 Metal Fitter 金属装配工

Metal Fabricator, Boilermaker：金属制造工, 锅炉制造装配、修理工

2391-11 Medical Diagnostic Radiographer 医疗放射诊断技师 | 4122-11 Metal Fabricator, Boilermaker 金属制造工, 锅炉制造装配、修理工 | 4112-11 Metal Fitter 金属装配工

Metal Fabricator：(金属制造工)

Medical Lab Technologist(医学实验室技师); | Metal Fabricator(金属制造工); | Pharmacist(药剂师);

Metal Fitter：金属装配工

4122-11 Metal Fabricator, Boilermaker 金属制造工、锅炉制造工 | 4112-11 Metal Fitter 金属装配工 | 4112-13 Metal Machinist 金属机械工

Metal Fitter：金属拆卸工

4122-11 Metal Fabricator,Boilermaker金属制作工、锅炉造制工 | 4112-11 Metal Fitter金属拆卸工 | 4112-13 Metal Machinist金属机械工

foundryman's fever：铸(造)工热(症)(金属烟尘中毒)

flood fever 恙虫病, 洪水热 | foundryman's fever 铸(造)工热(症)(金属烟尘中毒) | glandular fever 腺热, 传染性单核细胞增多症

Metal Machinist：金属机械工

4112-11 Metal Fitter 金属装配工 | 4112-13 Metal Machinist 金属机械工 | 2383-11 Occupational Therapist 职业治疗师

Metalworker：金属工

metalplatepath金属板电镀槽 | metalworker金属工 | metricunit公制单位

Gas Fitters：煤气工

7252 蒸汽管道工,管子工和自动喷水灭火系统安装工 Steamfitters, Pipefitters and Sprinkler System Install... | 7253 煤气工 Gas Fitters | 726 金属成形,塑造和竖立技工 Metal Forming, Shaping and Erecting Trad...