- 更多网络例句与轧相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Netting on a multilateral basis is arithmetically achieved by summing each participant's bilateral net positions with the other participants to arrive at a multilateral net position.
多边的轧差在算术上是通过计算每个参与者与其他参与者之间的双边轧差余额而得到一个多边轧差余额。
-
The contact curved surface equations and the contact plane surface equations have been worked out. The boundary curve eqations of the contact surface have been founded.
运用数学分析方法，首次对板式楔横轧工艺的轧件稳定旋转条件、轧件不产生缩颈拉裂条件进行了理论研究。
-
On the basis of nonlinear FEA code ANSYS/LS-DYNA, rail rolling process of universal rolling unit were simulated by 3D large deformation thermal-mechanical coupled elastic-plastic FEM. And the deformation shape of the work piece, deformation parameters and cross dimensions for each pass were obtained and stress,stain distribution and metal flow in rolling process of typical passes were analyzed in detail. Analyzed typical pass stress and strain distribute, rolling stress and deforming in universal pass last groove in detail,discussed the effect regularity of residual stress distribution and size to safely using rail, detailed to expound universal pass to railhead tread circular arc process.
本文基于ANSYS/LS-DYNA非线性显式有限元软件，以60kg/m的重轨为研究对象，采用全三维弹塑性热力耦合的有限元方法研究了重轨在万能轧机组中的变形过程，得到了轧件在孔型中的延伸情况、各道次轧件的变形参数，分析了典型道次的应力、应变分布，并详细分析了全万能成品孔型中轧件受力和变形情况，讨论了残余应力的分布及大小对钢轨安全使用的影响规律，详细地阐述了全万能成品孔型对轨头踏面圆弧的加工过程。
-
This topic mainly makes full use of the theory of node curve in closed condition and theory of instantaneous transmission to ratiocinate the rolling curve equation of the ellipse in polar coordinates format.
推导了以极坐标表示的椭圆轧件楔横轧轧制曲线方程，为轧件成形提供了理论依据，扩展了非回转轧件轧制的范围。
-
The temperature field of cross section and temperature variation graph in bar and rod continuous rolling process were done by FEM.
本文采用有限元方法对棒线材连轧过程轧件温度场进行了解析，解出了轧件横断面温度场并绘制了连轧过程中轧件温度变化曲线，可以看出变形区热传导作用对轧件表面温度有较大的影响，计算结果表明，在精轧机组之前设定值与轧件表面温度的计算值吻合，在进入精轧机组之后设定值更接近于轧件平均温度的计算值。
-
In view of product quality of cross wedge rolling semifinished product of automotive power-shift box middle shaft which has heavy sectional shrinkage,numerical simulation and experimental method were adopted to analyze single wedge rolling and second wedge rolling method.
针对用楔横轧工艺生产具有大断面收缩率特点的汽车变速箱中间轴毛坯所存在的产品质量问题，利用数值模拟与实轧试验对汽车变速箱中间轴毛坯一次楔成形和二次楔成形进行了分析研究，发现采用一次楔成形方法加工汽车变速箱中间轴毛坯，轧件不易发生弯曲，中间断面收缩率最大处没有发生缩颈现象，心部质量也较二次楔成形好。
-
According to the disposal characters of trio-cross wedge rolling roller,the paper brings out a billet circumrotate assumption of circumference during rolling-even process.
根据三辊楔横轧轧辊布置的特点，提出轧件在轧齐段旋转2π/3周的假设，并以此为基础把轧齐过程分成3个阶段。
-
Strip limit minimum rollable gauge and minimum rollable gauge considering productivity are analyzed and derived using new rolling pressure model, work roll surface temperature rise formulae is derived on the basis of mill stand thermal balance. The affecting factors of work roll surface temperature and the influences on the choice of roll size are discussed.
本文从轧机结构设计、力能参数计算、强度设计计算等方面综合论述了辊系参数设计计算的基本理论，在理论上提出了采用考虑粘着摩擦的混合摩擦模型和考虑轧件的弹性变形计算冷轧薄板轧制压力的方法，推导并以冷轧机实测轧制压力验证了轧制压力新模型；应用新的轧制压力模型分析并推导了轧件极限最小可轧厚度和考虑生产率的最小可轧厚度公式；根据工作机座热量平衡原理推导了工作辊温升公式，分析了工作辊温度的影响因素，研究了工作辊温升对轧辊参数选择的影响。
-
Addressing the pipe-rolling process consisting of rotary piercing mill, full-floating mandrel mill and stretch reducing mill, it is pointed out that both the Crop End Control technique of the stretch reducing mill and the Front-Tail Sharpening process should be jointly employed.
针对由斜轧穿孔机、全浮动芯棒连轧管机、张力减径机组成的轧管工艺，指出应将张力减径切头控制技术与管端轧薄工艺结合。并指明当今对轧管工艺的研发应从工艺技术本身和自动控制软件包两个方面着手。
-
The results show that with the increase of strain rate, the grain sizes of thermal simulation AZ31B alloys with different deformation all decrease; however, when other conditions are the same, the higher deformation will lead to the formation of the smaller grain size, and as the cooling intensity decreases, typical cast structure of AZ31B will appear. With the decrease of roll casting temperature, the dendritic size of roll casting AZ31B alloy sheet prepared by the same strain rate is also reduced, but with the increase of strain rate, the dendritic size of the alloy sheet prepared by the same initial roll casting temperature is decreased, and the tendency of dendritic streamline is strengthened. During the roll casting process of AZ31B alloy, rolling force should not be large, otherwise it will cause heat cracking.
研究结果表明：在不同应变量下，热模拟样品的晶粒粒度均随应变速率的增加而减小，而当其他条件相同时，变形量越大晶粒粒度越小，冷却强度降低，合金呈典型铸态组织；利用铸轧技术生产的AZ31B合金，当应变速率一定时，随着初始铸轧温度的降低，铸轧态板材的树枝晶粒度逐渐减小；而在初始铸轧温度一定时，随着应变速率的增大，铸轧态合金板材的树枝晶粒度也逐渐减小；而随着应变速率的提高，树枝晶沿轧向呈流线状排列的趋势增强；在AZ31B合金铸轧过程中，轧制力不能太大，否则容易引起热裂。
- 更多网络解释与轧相关的网络解释 [注：此内容来源于网络，仅供参考]
-
pierced billet：穿轧过的坯料、荒管
pierceability穿轧性能 | pierced billet穿轧过的坯料、荒管 | pierced shell穿轧毛管
-
bordering machine：轧花边机
轧墨机rolling mill | 轧花边机bordering machine | 轧出乳雕[装订] stamp in relief
-
bordering machine：中文:轧花边机
中文:轧墨机rolling mill | 中文:轧花边机bordering machine | 中文:轧出乳雕[装订] stamp in relief
-
chug：轧轧声
chuffy 像农夫的 | chug 轧轧声 | chugalug 一饮而尽
-
Chug all night：整晚发出轧轧声
04 我们大部分很忧愁 Most of us are sad | 05 整晚发出轧轧声 Chug all night | 06 特定类型的愚人 Certain kind of fool
-
evenness calender：均匀轧车,均匀轧车
evenly spaced energy level 均匀间隔能级,均匀间隔能级 | evenness calender 均匀轧车,均匀轧车 | evenness degree 均匀度,均匀度
-
roller ginning：罗拉轧棉
"罗拉轧棉机","roller gin" | "罗拉轧棉","roller ginning" | "罗拉式轧棉","roller ginning cotton"
-
scroop：轧轧的响声;轧轧地响
scroll 涡 | scroop 轧轧的响声;轧轧地响 | scrooping 丝呜
-
slop padding：点轧;面轧;单面浸轧
工作外衣;低廉成衣 slop | 点轧,面轧,单面浸轧 slop padding | 浸轧式上浆机 slop starching machine
-
rerolled rail：重轧的钢轨,重轧钢轨
rerolled bar ==> 重轧钢筋 | rerolled rail ==> 重轧的钢轨,重轧钢轨 | rerolled steel ==> 半成品钢