- 更多网络例句与螺杆相关的网络例句 [注：此内容来源于网络，仅供参考]
-
By comparison, the TATSR has higher efficiency of pumping. plasticization and mixing than that of twin screw reactor. At the same time, the productivity ratio of TATSR is bigger than that of twin screw and four-screw extruder. So TATSR has a good outlook of engineering application.
与双螺杆反应器相比，三螺杆反应器具有较强的物料输送能力、塑化和混合能力；同时，三螺杆反应器的产能比又大于双螺杆和四螺杆反应器，因此，三螺杆反应器具有较好的工程应用前景。
-
Three-dimensional isothermal flows of two different screw heads of the injection molder are simulated by using the finite element package Polyflow and adopting the work conditions that the barrel wall is static and the screw rotates and reciprocates periodically.
往复式螺杆注塑机的核心部件是螺杆，其作用是将固态的塑料熔融塑化，并将其注入模腔。螺杆设计是往复式螺杆注塑机设计的关键技术之一[1]。由于没有解析公式来辅助设计注塑螺杆，故通常简单地参照挤出螺杆的设计方法进行设计[2，3]。
-
During the investigations, some basic research methods and theories such as mending the end section profile of the screw arbor gear applying the conjugate principle, the milling outline for the screw arbor profile cutter by kineto-synthesis method, establishing the dummy variable model of the screw arbor by the CAD method, the theory of the distributing of the fluid pressure on the screw, the precision analyzing and computing screw profile by the dummy model and FEM method are established.
在研究过程中确立了一些基本的研究方法和基本的理论。如应用共轭原理改进螺杆端截面齿曲线的、利用运动合成的方法研究螺杆成形铣刀廓型、应用计算机辅助设计的方法建立螺杆的虚拟模型、应用牛顿流体理论研究螺杆中的流体压力分布、应用有限元分析计算方法对螺杆做精确分析计算。
-
XD-2003 strap machine is changed from XD-2002 machine which has a cast aluminium on the bed,making the screw,screwtube and speed reducer keeping concentric.the V-model manger on the bed is lower than the flat on which the speed reducer is fixed,the components are finished machining by machine tool.guaranteeing perpendicularity, degree of balance.speed reducer,screw and screwtube is fixed on the base,and the screwtube is in the mini-manger,then ensuring axis keeping concentric with sheath,screwtube feed opening has a chromium hard-wearing sheath,which can improve the lifetime of the screw and screwtube to threefold or to fourfold.
XD-2003 型塑料打包带机组，是在XD-2002型机组的机座上安装了一个铸铁机座，使螺杆，螺筒和减速机保持同心，座上的V型槽比安装减速机的平面低，其部件都是经过机床精加工完成的，保证了垂直度和平衡度。减速机和螺杆、螺筒置于底座上，且螺筒卡在微型槽内。确保轴与套保持同心，螺筒下料口处设有高铬耐磨衬套，这样可使螺杆、螺筒的寿命提高3-4倍。
-
Fourth, to avoid breaking material: Screw must not be allowed in the case of blanking operation, upon occurrence of the stator as dry friction of rubber, produces instant heat and burn, so good grinder, screw grille flow is a necessary condition for normal operation To this end, some screw pump body is also expected to stop off device installed, when there Fracture, because he has a self-priming screw pump function of the characteristics Chemical pumps of the body will produce a vacuum chamber, vacuum screw pump will stop operation.
四、避免断料：螺杆泵决不允许在断料的情形下运转，一经消防泵发生，橡胶定子由于干摩擦，瞬间产生高温而烧坏，所以，粉碎机完好，格栅畅通是螺杆泵正常运转的必要条件之一，为此，有些螺杆泵还在泵身上安装了断料停机装置，当发生断料时，由于螺杆泵其有自吸功能的特性，腔体内会产生真空，真空装置会使螺杆泵停止运转。
-
Screw must not be allowed to break at the expected operating circumstances, once happened, rubber stator do because of friction heat generated instantly burned, so, good grinder, screw grille flow are a necessary condition for the normal operation of one of For this reason, some screw pump was also installed devices break down material, when the expected happened when broken, because of the screw pump has self-priming function of its characteristics, the body will produce a vacuum chamber, vacuum devices will stop screw operation.
螺杆泵决不允许在断料的情形下运转，一经发生，橡胶定子由于干磨擦，瞬间产生高温而烧坏，所以，粉碎机完好，格栅畅通是螺杆泵正常运转的必要条件之一，为此，有些螺杆泵还在泵身上安装了断料停机装置，当发生断料时，由于螺杆泵其有自吸功能的特性，腔体内会产生真空，真空装置会使螺杆泵停止运转。
-
Screw does not allow for the case of run-off materials, once occurred, rubber stator due to dry friction, the heat generated instantly burned, so grinder intact, grille flow is a necessary condition for the normal operation of pumps, one of To this end, some screw pump is also installed in the body break down plant material, as occurs when the material off, because he has a self-priming pumps feature the characteristics of the body will produce a vacuum chamber, vacuum devices will screw pump to stop operation.
螺杆泵决不允许在断料的情形下运转，一经发生，橡胶定子由于干磨擦，瞬间产生高温而烧坏，所以，粉碎机完好，格栅畅通是螺杆泵正常运转的必要条件之一，为此，有些螺杆泵还在泵身上安装了断料停机装置，当发生断料时，由于螺杆泵其有自吸功能的特性，腔体内会产生真空，真空装置会使螺杆泵停止运转。
-
Jinyang company has Precision Screw Products Barrel (Barrel nitride screw, double screw alloy pipe, stainless steel screw cylinder, all-hardened screw, high-speed tool steel screw Barrel): injection molding machine screw feed extinguishers, extruder screw barrel, blow molding machine screw cylinder, chemical fiber Screw Barrel, Single-screw cylinder, parallel twin-screw barrel, conical twin-screw cylinder, screw feed tube attachment; Product selection quality 38CrMoALA; quality SACM645; quality SKD11; quality SKD61; 9Cr18MoV such as high-quality materials, the quenching and tempering, molding.
主要销售注塑机的螺杆，料筒等相关配件金洋公司主要产品有精密螺杆料筒（氮化螺杆料筒、双合金螺杆料管、不锈钢螺杆料筒、全硬化螺杆、高速工具钢螺杆料筒）：注塑机螺杆料筒、挤出机螺杆机筒、吹塑机螺杆料筒、化纤机螺杆料筒、单螺杆料筒、平行双螺杆炮筒、锥形双螺杆料筒、螺杆料管附件；产品选用优质38CrMoALA；优质SACM645；优质SKD11；优质SKD61；9Cr18MoV等优质材料，经调质、成型。
-
Screw pump the working principle is: screw pump work, the liquid after being inhaled into the screw pump shell and sealed by Wai space, when the initiative screw rotation, the screw pump seal volume in the squeezed increase Luoya Screw pump pressure, and along the axial movement.
螺杆泵的工作原理是：螺杆泵工作时，液体被吸入后就进入螺纹与泵壳所围的密封空间，当主动螺杆旋转时，螺杆泵密封容积在螺牙的挤压下提高螺杆泵压力，并沿轴向移动。
-
Polymer processing is a high-energy process operation, and screw machinery is widespread applied to the polymer processing, such as screw extruders, screw injection molding machine and so on. The screw plasticating and conveying equipments based on shear rheology are generally adopted in polymer processing, in which materiels are dominated by shear stress. Therefore, there are some ubiquity disadvantages of the current methods of polymer materials processing, such as long thermo-mechanical, high energy consumption, too big equipment structure, and dependence on material properties.
加热管高分子材料成型加工是高能耗过程作业，目前普遍采用螺杆机械，如螺杆挤出机、螺杆注射机等，在螺杆机械中物料塑化输运主要是靠螺杆旋转时对物料的拖曳作用，固体输送为摩擦拖曳，熔体输送为粘性拖曳，物料的速度梯度与其流动和变形方向垂直，这种流动与变形受剪切应力支配，所以当前的高分子材料加工方法普遍存在物料塑化输运所经历的热机械历程长、能耗高、设备结构大、对物料特性依赖性强等缺陷。
- 更多网络解释与螺杆相关的网络解释 [注：此内容来源于网络，仅供参考]
-
screw extruder：螺杆挤出机
screw extractor 螺杆旋出器 | screw extruder 螺杆挤出机 | screw extrusion machine 螺杆压出机
-
twin-screw extruder：双螺杆挤压机
双螺杆挤出机:twin screw extruder | 双螺杆挤压机:Twin-screw Extruder | 同向双螺杆:Intermeshing Co-rotating Twin Screw
-
double-screw plodder：双螺杆压条机
double-screw plastic extruder 双螺杆塑料挤压机 | double-screw plodder 双螺杆压条机 | double-screw pump 双螺杆泵
-
single flighted screw：单导程螺杆,单线螺杆
single flight 单跑 | single flighted screw 单导程螺杆,单线螺杆 | single float viscometer 单浮子粘度计
-
single flighted screw：单螺纹螺杆
螺杆 screw | 单螺纹螺杆 single-flighted screw | 双螺纹螺杆 doufle-flighted screw
-
screwless extruder：无螺杆挤压机
screw injection-molding machine 螺杆射出成形机 | screwless extruder 无螺杆挤压机 | screw plasticating injection molding 螺杆塑化射出成形
-
cross slide screw：横动台螺杆,横滑板螺杆
cross slide rotary table ==> 横向滑板回转工作台 | cross slide screw ==> 横动台螺杆,横滑板螺杆 | cross slide table ==> 纵横移动工作台
-
feed screw collar：进给螺杆挡环
feed screw 进给螺杆; 螺旋给料机; 螺旋送料机 | feed screw collar 进给螺杆挡环 | feed screw mechanism 进料螺杆机构
-
twin-screw oil mill：双螺杆榨油机
twin-screw extruder 双螺杆挤出机 | twin-screw oil mill 双螺杆榨油机 | twin-screw pump 双螺杆泵
-
screw-driven shaper：螺杆驱动牛头刨
screw-driven planer螺杆驱动刨床 | screw-driven shaper螺杆驱动牛头刨 | screw-driven slotter螺杆驱动插床