网格

基本解释 (translations)

G  ·  reseau  ·  gridding

与网格相关的网络例句 [注：此内容来源于网络，仅供参考]

An adaptive grid scheme controlling cell area is used to generated grids in the divergent section of symmetric annular nozzle, and the generated grids are used in the flowfield calculation through the uncoupled way. The elliptic equations are used to generate grids in three dimensional regions of FDN divergent section, the source terms used in the equations employ a mathematical form which is independent of the boundary shape and of the boundary grid point distribution, the free parameters contained in the source terms are determined by the two restraint conditions, the intersection angle of transverse grid lines with boundaries and the local curvature of the transverse grid lines at the boundaries, and the interior grid distribution controlled directly by the grid point distribution assigned on the boundaries is realized, it makes the grid more clustering near the nozzle wall. For the generated grids in the whole computational regions have a good smoothness and orthogonality, the accuracy of calculation in the flowfield is ensured.

对轴对称的环形喷管采用控制网格面积的自适应网格方法对扩散段部分进行了网格生成，并通过非耦合方式应用于喷管的流场计算中；对强制偏流喷管扩散段内的三维区域采用椭圆型方程进行网格生成，方程中的源项采用了与边界形状和边界网格点分布无关的数学形式，源项内的自由参数由横向网格线与边界的交角及横向网格线在边界处的局部曲率两个约束条件来确定，实现了由边界上的网格分布直接控制内部的网格点，使壁面附近具有较密集的网格，并且在整个计算区域内的网格都具有良好的光滑性和正交性，从而保证了流场计算的准确性。

Our approach consists of the following steps: providing a sketch based mapping between the sources and the target; deforming the target based on the deformations of the corresponding sources by means of differential mean value coordinates; smoothing the deformed target with constrained minimization method to form a key frame of the target animation; and interpolating between key frames created from to produce a complete 3D animation of the target.

该框架由以下几个步骤组成：使用草图在源网格和目标网格间建立映射；使用非闭合网格均值坐标，根据源动画的运动风格来变形目标网格；对变形后的目标网格求解最小化约束函数以获取光滑的目标网格，从而生成目标动画的关键帧；对由产生的结果进行插值，产生完整的目标对象的三维动画。

This thesis contributes to geometry compression in the following aspects: Proposes a method of progressive spherical mesh parameterization based on local parameterization by directly projecting the deleted vertices to its neighborhood. Based on spherical mesh paramterization, an adaptive subdivision remeshing method by progressivly redistributing of sampling points is proposed, by this means, the main geometry information of the original mesh can be captured with only a small amount of samples, it can also be used in mesh simplification. By regarding attributes binded on mesh vertices as geometry signals and transferring them onto a uint sphere by means of spherical mesh parameterization, meshes with different attributes are compressed with spherical wavelet successfully with high compression rate. As a kind of lossy geometry compression technique, two mesh simplification algorthimes are also presented in this thesis.

归纳起来，本文的主要贡献有：提出了以直接投影局部参数化方法为基础的网格累进球面参数化方法；在网格球面参数化方法的基础之上，提出了一种基于累进优化布点方案的网格细分采样方法，该方法可以用很少的采样点就可以捕获到网格的主要特征，因此我们也将其用于后面的网格简化工作当中；通过将网格顶点上定义的各种属性看成几何信号，并以网格球面参数化为手段将几何信号迁移到单位球面上，从而成功地实现了用球面小波对各种几何信号的压缩；作为一种有损压缩方法，本文还提出了基于统一距离的网格简化算法和基于重采样的网格简化算法。

Differing from the general BEM that is attributed from the general boundary integral equation, The natural boundary element method attributed from the natural BIE has not only the advantage of the dimensionality, but is confirmed and gain the only NBIE from the original problem.

无网格方法仅仅需要节点信息，克服了有限元等传统数值方法对网格有较强依赖性的缺点，摆脱了网格的束缚，避免了大量的网格分划、复杂的网格生成及重新划分的工作，减少了因网格畸变而引起的困难，而且收敛快、精度高、易于实现和进行后处理工作。

In this paper, the basic concept of grid, grid definition of net格特, grid computing in detail, and the current grid mesh architecture and the application of innovative research.

本文对网格技术的基本概念、网格定义、网格特点、网格计算进行了详细的介绍，并对目前网格的体系结构和网格的应用进行了创新研究。

The research background of this thesis is modified reputation evaluation algorithms in distributed environment in order to utilize them into Grid environment, Presenting a new Dempster-Shafer-Theory-Based Grid-Supported Reputation Management Model combined with the Grid environment and advanced research work in point, in order to adapt to the requirements of Grid entities reputation quantitative evaluation, the immeasurability and fuzzy problems of Grid credibility description are resolved, further put forward the relevant reputation evaluation algorithm.

将在分布式环境下适应的信誉评价算法进行改进使其适用于网格环境中，以网格环境下的安全合作为目标，结合网格环境以及在此方面同行所做的前沿工作，提出一种新的基于Dempster-Shafer证据理论的支持网格的信誉评价算法，以适应网格实体信誉定量评价的要求，解决网格信誉描述的不可测量性和模糊性问题，并给出相应的信誉管理模型。

The research of both theories and practices of gridding in the dissertation shows that: Linear interpolation based on triangulation is simple computationally and fast, but its gridding results isn't smooth and its precision is low; Multiquardric method is also simple computationally with high precision and good effect, but its gridding is slow because it is based on global calculation; Minimum curvature method is fast with high precision and good effect, but its gridding quickly degrades over areas with sparse data control when grid spacing smaller than the actual grid spacing is used; Ordinary Kriging method is high-precision, but its gridding is slow because of large calculation; Inverse interpolation is a computationally fast, efficient and robust method with high accuracy and perfect effect, and its gridding results of different gridding orientations are basically identical. Inverse interpolation is suitable for thegridding of geophysical irregular data, especially for large-scale geophysical irregular data.

本文的方法研究和数据试验分析表明：基于三角网的线性插值法计算简单，速度快，但其网格化结果不光滑，精度不够；多元二次函数法计算简单，网格化精度高，效果良好，但它是基于全局计算的，计算速度较慢；最小曲率法计算速度快，网格化精度高，效果良好，但其在稀疏控制点的网格化容易出现振荡现象；普通克里格法网格化精度高，效果良好，但其计算量较大，一般计算速度慢；反插值法网格化计算稳定，速度快，精度高，效果好，而且在网格化方向不同的情况下其网格化精度效果都达到基本一致，适合于地球物理不规则分布数据的网格化，特别是大规模地球物理不规则分布数据的网格化。

First mostly contraposing hull deck structure it goes along FEA analysis, discuss the different influence degree of calculational results between the different simplifications of the mathematical model, thereinto mostly analyse five different simplifications of the deck model; Second contraposing hold section and hull deck structure it goes along FEA analysis together, discuss the different influence degree of calculational results between the different elements style, gridding number and gridding density, thereinto mostly analyse the difference between adopting 8 node shell element and 4 node shell element, nondense gridding and thick gridding, and numerous gridding number and few gridding number, In the end mostly contraposing hold section structure it goes along FEA analysis, discuss the different influence degree of calculational results between the different boundary conditions, thereinto mostly analyse the difference between adopting CCS boundary conditions and LR boundary conditions.

首先主要针对船体甲板结构进行分析研究，讨论结构简化不同对有限元计算结果的影响程度，其中主要研究分析了五种不同甲板结构简化模型；紧接着针对舱段与甲板结构一起进行分析研究，讨论单元类型，网格数量与密度的不同对有限元计算结果的影响程度，其中主要研究分析了分别采用8节点板壳单元与4节点板壳单元的不同，以及分别采用疏的网格与密的网格，多的网格数量与少的网格数量的计算结果的差异。最后主要针对舱段模型进行分析研究，讨论不同的边界条件对有限元计算结果的影响程度，其中主要研究分析了分别采用CCS舱段边界条件与LR舱段边界条件进行有限元计算而带来的结果上的差异。本文第二部分为港工建筑物中的大直径薄壁圆筒结构的有限元比较分析。在研究大圆筒的有限元比较分析中，主要讨论用不同的网格密度与数量来划分网格引起的差异。其中用了网格密，数量多与网格疏，数量少两种模型进行大圆筒结构的有限元分析对比

Estimation of the normal and curvature on meshes with good precision and rapidness is the foundation of many applications, such as characteristic detecting, partitioning, simplification, smoothing, distortion, reconstruction on mesh.

精确、快速地计算网格曲面的法向量和曲率等微分量是众多离散曲面应用的重要基础，对网格曲面的特征提取、网格分割、网格简化、网格光顺、网格变形、网格重建等处理过程均有重要的作用。

Based on the transfinite interpolation theory, an improved algebraic grid generation method is presented in this paper. Our improvements of existing algebraic grid generation method include:(1) orthogonality control, which greatly improves grid orthogonality adapted to viscous flow calculation;(2) weighted average smoothing, which efficiently handles with grid intersection due to concave corner existence;(3) normal vector control, which adjusts grid smoothing near convex corner.

基于无限插值理论，引入本文提出的网格正交控制、物面法向量控制、加权平均光顺措施，给出了一种改进的空间网格生成方法，有效克服了传统无限插值网格生成方法在复杂外形网格生成方面的缺陷，有效改善了网格的法向疏密性、贴体性及周向网格的均匀性，对真实飞行器部件网格生成非常迅速。

与网格相关的网络解释 [注：此内容来源于网络，仅供参考]

Activate Grid：激活栅格;激活网格

Activate All Maps激活所有贴图 | Activate Grid激活栅格;激活网格 | Activate Grid Object激活网格对象;激活网格物体

mesh fractal dimension：网格分维

网格优化:mesh optimization | 网格分维:mesh fractal dimension | 四叉树网格:Quadtree mesh

grid size：网格大小

2.3 索引网格大小(Grid size)在加载数据时候,我们还需要给数据指定索引网格的大小,选择合适的索引网格可以提高我们的工作效率. 具体选择多大的网格,理论上是使得你的一个索引网格里面只有一个要素(呵呵,太难了).

grid：网格

近来,"网格"(Grid)一词频频出现. 网格技术通过网络让我们可以随时随地按需获得计算资源. 之所以称作"网格",是因为它们类似于电网,人们利用电网可以自由地从壁装电源插座用电,而无发电机的意识. 目前,国际上普遍认为,

gridlines：指定网格线的类型

GridColorFixed设定固定网格线的颜色 | GridLines指定网格线的类型 | GridLinesFixed指定固定单元的网格线形式

lattice：网格

"自我重组"机器人使用的是一种叫作"网格"(lattice)的材料. 顾名思义,这种材料就像网格一样,"网格"上的每个节点都可以从一个位置移动到另一个位置,从而轻而易举地实现变形. 拉斯和达特茅斯大学计算机科学机器人实验室的研究人员造了一个"网格"机器人,

Remove mesh point with Mesh tool：使用网格工具删除网格锚点

Add mesh point with Mesh tool without changing color 不改变填色使用网格工具增加网格锚点 Shift-c... | Remove mesh point with Mesh tool 使用网格工具删除网格锚点 Alt-click | Draw from center 从中心绘制 Al...

mesh refinement：网格加密

现有的网格自适应方法有再生网格(Remeshing)法、网格加密(Mesh Refinement)法. 网格移动(Mesh Movement)法等. 再生网格法需要较长的计算机时,而网格移动法又相当复杂,一般采用网格加密法.

Meshing Size：网格尺寸

Mesher网格化 | Meshing Size网格尺寸 | Meshsmooth网格光滑;光滑网格编辑修改器

mesh spacings：网格步长;网格间距

网格区域 mesh region | 网格步长;网格间距 mesh spacings | 网格宽度 mesh width