缝

基本解释 (translations)

slot  ·  slots  ·  steek  ·  stitch  ·  slotted  ·  suturation  ·  steeked  ·  steeking  ·  stitched  ·  rhaphe

与缝相关的网络例句 [注：此内容来源于网络，仅供参考]

The influence of with or without longitudinal joint, with or without initial opening, with or without filling in the joints and different friction factor in the joint face and so on are studied on the seismic response of Fengman Dam. Thus the conclusions for gravity dams with longitudinal joints is drawn.

对于丰满重力坝，本文考虑了有、无纵缝，纵缝有、无宽度，纵缝有、无填充物及缝面的不同摩擦系数等情况，进行了静动组合的地震反应分析，对存在纵缝的重力坝的抗震特性得出了一系列规律性的认识。

The experimental study on the cumulative effectiveness of different slit charge based on dynamic photoelasticity method was made,and the isochromatic fringes graphs in the process of blasting of the slit charge were obtained.

为了解切缝宽度对切缝药包爆炸聚能效应的影响，用动态光弹性法对不同切缝宽度的切缝药包的爆炸过程进行了试验，获得了切缝药包爆炸过程中的序列等差条纹图。

One of the family outweigh the mustard tips: Because there are many small cracks mustard, hand缝里it is very difficult to wash the dirty things, where we can with a clean brush to wash mustard so that you can wash the dirty mustard gap things.

家庭淹榨菜窍门之一：因为榨菜有很多小小的缝隙，用手很难把缝里的脏东西洗掉，这里我们可以用干净的刷子来洗榨菜，这样就可以洗掉榨菜缝隙中的脏东西了。

Affecting factors,research technical means and methods of improving strength of weldlines as well as parametric optimization and numerical simulation technology were discussed.

综述了注塑过程中熔接缝形成的组织结构及其力学性能研究的进展，讨论了熔接缝的特点，着重阐述了熔接缝强度的影响因素、研究的技术手段和提高熔接缝强度的措施，以及熔接缝加工参数优化与数值模拟技术。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

This article sums up a series of slotted screen design methods,including the corrosion resistance design and antiscale design,and defines slotted screen parameters according to their structure and working conditions,such as slotted width and length,slotted density and type and form, slotted screen strength and material,etc.

针对油井防砂完井优配割缝筛管的需要，从理论研究和应用实践中，总结出一套割缝筛管的设计方法，其中包括割缝筛管的防腐设计；割缝筛管的防垢设计；基于形成砂桥来控制地层砂的设计原则和基于完全阻止地层砂移动的设计原则来进行割缝筛管的缝宽设计；割缝筛管的面密度的设计(包括裸眼井用割缝筛管)；割缝筛管的缝长设计。

The machine is suitable for straight seaming, zigzag, embroidery, abutted bar tacking, overedge seaming, zipper inserting seaming wrapped around seaming, pattern seaming on thin and medium fabrics.

可在薄、中、厚料上做直缝、曲缝、绣花、拼缝、套结缝、包边缝、拉链缝、包梗缝、花纹缝等。

Thread overlock四线包缝 Used for seams on fleece, light and medium weight wovens and knitwear.

用于起绒织物，轻薄及中等克重梭织物和毛衫类拼缝。

Sphenosquamous suture ;sphenotemporal suture 蝶鳞缝,蝶颞缝:同sutura sphenosquamosa

subcuticular suture 皮内缝术：一种皮肤缝合的方法；缝线置于表皮下组织并与伤口平行，可以用连续的或间断的缝法。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的&瓶子模型&，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了&缝洞单元&的概念，并制定了&缝洞单元&纵横向划分的基本原则和依据及划分方法，并对&缝洞单元&进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

与缝相关的网络解释 [注：此内容来源于网络，仅供参考]

calking chisel：长柄捻缝凿捻缝凿

calker 捻缝工 | calking chisel 长柄捻缝凿捻缝凿 | calking chisel 捻缝凿

caulker：捻缝工捻缝锤

caulked 捻缝的凿密的 | caulker 捻缝工捻缝锤 | caulking chisel 捻缝凿

dilatation joint：膨胀缝,膨胀伸缩缝,钢轨间隙,伸缩缝

dilatation fissure 膨胀裂隙 | dilatation joint 膨胀缝,膨胀伸缩缝,钢轨间隙,伸缩缝 | dilatation of aorta 主动脉扩张

sutura harmonia：直缝,符合缝

\\"缝\\",\\"sutura\\" | \\"直缝,符合缝\\",\\"sutura harmonia\\" | \\"锯齿缝\\",\\"sutura serrata\\"

hermetic motor：弥缝式电念头; 弥缝式电念头; 弥缝型电念头

Hele-Shaw motor 径向活塞式液压电念头; 径向活塞式液压电念头 | hermetic motor 弥缝式电念头; 弥缝式电念头; 弥缝型电念头 | hermetically sealed motor 弥缝式电念头

pointing：填缝;勾缝;填缝材料;"擦口

pointed squared-rubble wall 有勾缝的毛石墙 | pointing 填缝;勾缝;填缝材料;"擦口" | poldered village protection scheme 以土堤围绕乡村的防洪计划

pointing trowel：勾缝刀,勾缝溜子,勾缝镘刀

pointing tool 倒棱工具,勾缝工具 | pointing trowel 勾缝刀,勾缝溜子,勾缝镘刀 | pointing velocity 瞄准速度

Reem：扩缝(捻缝时把缝扩大

reelinghook捻缝钩 | reem扩缝捻缝时把缝扩大 | reemingbeetle木板捻缝槌

horse iron：长柄捻缝凿长柄捻缝凿捻缝凿

horse iron 长柄捻缝凿 | horse iron 长柄捻缝凿长柄捻缝凿捻缝凿 | horse latitudes 副热带无风带

repointing：重勾缝 重勾灰缝 重嵌灰缝 重新勾缝

repointing 锻伸铧尖 | repointing 重勾缝 重勾灰缝 重嵌灰缝 重新勾缝 | repointingmasonry 重勾缝圬工