等分

基本解释 (translations)

part  ·  halving

词组短语

divide from the middle

与等分相关的网络例句 [注：此内容来源于网络，仅供参考]

To obtain normal range of line bisection task of healthy Chinese elder volunteers, to understand whether the performance of line bisection by left or right hand is significantly different.

获得中国老年健康志愿者线等分试验的正常数值，并了解左、右手完成线等分试验的结果是否存在着差别。3。

Study on the rapid Propagation Technique of Lycoris. Herb and get follow results: In the period found of axenic clone 0.1%HgCl2 is the best disinfector to deal with the Lycoris" bulb ,as to neat part, such as root, leave, and bulbil, is fit to use 0.1%HgCl2 antisepsis 7min. And found the best effect is the bulb scale with base. Root, leaf and bulb scale without base all were not inducement adventitious buds. Different position of bulb had different culture effect. 3-15 of middle part of bulb can be induced most adventitious buds but inner and outer of least it. Incised the bulb with three types (pieces of eight, pieces of six, piece of four), and found the type of pieces of six is best to Lycoris mass production. L.sprengeri is fit MS+BA5mg/l+NAA0.1mg/l and L.squamigera is fit MS+BA5mg/l+NAA0.5mg/l, but the medium fit to culture L.longituba haven"t be found.In the period of Subculture-Found of mass production, the most multiplication of adventitious buds in MS+BA5mg/l+NAA0.5mg/l during subculture of L.sprengeri, L.squamigera.

石蒜属植物快速繁殖技术研究中，在无菌无性系建立阶段：鳞茎以0.1％HgCl_2消毒10-12分钟效果最好，而叶、根尖、鳞芽等较干净部位选用0.1％HgCl_2消毒7分钟；用三种石蒜属植物的叶片、根尖、鳞芽及带基盘与不带基盘鳞片进行培养，以带基盘鳞片诱导分化效果最理想，鳞芽易培养出芽，但数量有限，而叶片、根尖与不带基盘鳞片均未诱导分化；带基盘鳞片为石蒜属植物快速繁殖最佳外植体，以鳞茎中部3-15层芽诱导率高，较外层稍次之，内部鳞片诱导率最低；选用八等分法、六等分法、四等分法切割鳞茎，六等分法综合效果最好；每外植体带三鳞片培养最为适宜；三种石蒜属植物各自适合的培养基成分不同，换锦花在MS+BA5mg／l+NAA0.1mg／l中培养效果最好，夏水仙为MS+BA5mg／l+NAA0.5mg／l，而白花长筒石蒜在各培养基组合中培养效果均不理想，其适合的培养条件有待于进一步研究。

It has also been argued that the circle can be further divided by the numbers 7 producing the septile group of aspects, 8 a semi-square, 9 a novile, 10 a decile and 12 the semi-sextile.

同时也争论过可否分成7等分，形成7分的相位，8等分，9等分，10等分和12等分。

Keyword: Form of line of odd circular arc; Impeller blades; Milling craft; Error analysis0 forewordForm of odd round arc impeller blades is the crucial part in air-blower, its production method has solder, riveting and duralumin suppress.

铣制元理见图2，将要被处理的工件叶轮装置在铣床另加的等分盘上，等分盘固定在转回工作台上，使工件与转回工作台齐心，并紧固在一个，将铣床的工作台丝秆接长，使丝秆与挂轮体系的万向连轴节作同歩翻动。

Airbus Selects France Telecom Group, with Subsidiary Equant, and Cisco Systems to Implement an IP-based Communication System - France, July 12, 2005 - France Telecom Group, with its fully-owned subsidiary Equant, and Cisco Systems Inc. announced today that they have been selected by Airbus for a five-year contract to implement an IP telephony solution.

法国电信选择空中客车集团与附属等分、思科系统实施IP的通信系统-法国2005年7月12日法国电信集团，其全资附属等分、思科系统公司今天宣布，他们已选定了欧洲空中客车进行为期5年的合同，实施一项知识产权(即InternetProtocol)电话解决方案。

5 Create the inferior screw model Bisectioning the included angle between exterior and interior screw and theincluded angle between ecto-upper and ento-upper screw in AutoCAD2006 software,Create a plane traverse the two bisection points and the core of the pedicle.

采用上述辅助定位后如遇椎弓根部穿破情况则需要手动调整螺钉以使螺钉刚好与原穿破侧椎弓根骨壁相切。 1.2.5创建下侧进钉方向的椎弓根螺钉模型：在AutoCAD2006程序中将椎弓根螺钉内外夹角、上方夹角两等分，由同侧两等分点与椎弓根中心点共同创建一平面，依该平面与同侧球在下终板平面交点创建下方螺钉模型。

Heraldry Any of four equal divisions of a shield.

盾牌上四等分中的一等分

The control principle of electrostatic shaping was introduced according to the balance between electrostatic force and resulting force formed by membrane deformation and the complex shaping process of SMEC. Then, taking the trisection circularity electrode for an example, the distribution characteristic of electric potential in the electrostatic field was analyzed, namely, the expression of potential function in the electrostatic field was deduced by Laplacian equation. And then, by combining the difference equation with electric potential expression, the numerical solutions of electrostatic force in single electrode mode and trisection circularity electrode mode were disposed. Finally, the calculated figure was compared with the ideal paraboloid and comparison shows that more accuracy would be achieved by multi-electrode control.

根据静电力与薄膜变形载荷作用力之间的平衡关系和静电拉伸薄膜反射镜成形的复杂过程，介绍了薄膜反射镜静电成形的控制原理；以三等分环状电极为例，分析了静电场中空间电势分布特性，即从拉普拉斯方程推导出静态场势函数的表达式；然后，利用差分与电势方程结合的方法，对单电极电场力和三等分环状电极电场力进行了数值求解；最后，将计算面形与理想抛物面进行了比较，结果显示，单电极情况下得到的薄膜反射镜面形不是理想抛物面，若采用多电极控制可获得更高的控制精度。

The control principle of electrostatic shaping was introduced according to the balance between electrostatic force and resulting force formed by membrane deformation and the complex shaping process of SMEC. Then, taking the trisection circularity electrode for an example, the distribution characteristic of electric potential in the electrostatic field was analyzed, namely, the expression of potential function in the electrostatic field was deduced by Laplacian equation. And then, by combining the difference equation with electric potential expression, the numerical solutions of electrostatic force in single electrode mode and trisection circularity electrode mode were disposed.

根据静电力与薄膜变形载荷作用力之间的平衡关系和静电拉伸薄膜反射镜成形的复杂过程，介绍了薄膜反射镜静电成形的控制原理；以三等分环状电极为例，分析了静电场中空间电势分布特性，即从拉普拉斯方程推导出静态场势函数的表达式；然后，利用差分与电势方程结合的方法，对单电极电场力和三等分环状电极电场力进行了数值求解；最后，将计算面形与理想抛物面进行了比较，结果显示，单电极情况下得到的薄膜反射镜面形不是理想抛物面，若采用多电极控制可获得更高的控制精度。

Compared with the normal coordinates calculation way, our method was easy and fast.(6) According to the above methods, programs were carried out to simulate.

用圆弧和直线拟合织物的二维悬垂曲线，使弧长等分的座标算法相对于一般的弧长等分的座标算法极大地降低了计算的复杂性，从而极大地提高了计算速度。

与等分相关的网络解释 [注：此内容来源于网络，仅供参考]

bisecting point：中点,二等分点

bisecting plane 二等分面 | bisecting point 中点,二等分点 | bisection 对分,二等分

bisector：等分线

bisecting point 中点 | bisector 等分线 | bisector 等分线二等分线

bisectrix：二等分线

bisector 二等分线;二等分物 | bisectrix 二等分线 | bisexlile 闰年

bisegment：(等分线或等分角的)平分部分之一

bisectrix | 等分线 | bisegment | (等分线或等分角的)平分部分之一 | bisegmentation | 完全或部分地分成两部

DIV：等分

外面的图标相当于多点 ,操作过程中,按 ESC才能退出 单点:绘图菜单里,即点一点就退出 点的定数等分(DIV): 通过点将一个对象等分成N等份 点的定距等分(ME):将一个对象按多长距离一个点做标记 闭式路径的等分,

Divide Polygons：等分多边形(责任编辑:admin)

Divide Edges等分边界 | Divide Faces等分面数 | Divide Polygons等分多边形(责任编辑:admin)

Divide Faces：等分面数

Divide Edges等分边界 | Divide Faces等分面数 | Divide Polygons等分多边形

ME：等分

外面的图标相当于多点 ,操作过程中,按 ESC才能退出 单点:绘图菜单里,即点一点就退出 点的定数等分(DIV): 通过点将一个对象等分成N等份 点的定距等分(ME):将一个对象按多长距离一个点做标记 闭式路径的等分,

SCORER SF：让球队中的等分小前锋进攻

SCORER PF 让球队中的等分大前锋进攻 | SCORER SF 让球队中的等分小前锋进攻 | SCORER SG 让球队中的等分后卫进攻

halver operator：二等分算子,等分算子

halver 二等分 | halver operator 二等分算子,等分算子 | halves 草桃片