- 更多网络例句与研制相关的网络例句 [注：此内容来源于网络，仅供参考]
-
The development of MSCIS mainly includes the following two parts: the cards and the software running on the communication computer. There are five types of cards, communication card, control card, analog output card, analog input card and digital input/output card.
MSCIS接口系统的研制工作主要包括两大部分：系统硬件板卡（包括通信卡、控制卡、模拟量输入卡、模拟量输出卡和数字量输入输出卡）的研制和通信计算机软件研制。
-
And No. 6 antifriction alloy material developed by the company is praised as "Antifriction King".
国家级重点项目"曾侯乙编钟"、"中华和钟"的成功复、研制，代表着当今世界编钟复、研制的最高水平，得到了国家领导人的高度评价，研制的6号耐磨合金材料被誉为"耐磨王"。
-
This paper analyses the deficiency of the process and puts forward a proposal to revise the stages of the process and to regulate the content of each stage, so as to standardize thejob of the weapon meteriel development, and impel the job in step and coordinated with theintegrated logistics support, and convert the materiel into...
现分析了原研制程序在这方面的不足，并提出修订研制程序的阶段划分并调整各阶段工作内容的建议；从根本上规范了武器装备研制工作，使其与装备综合保障工作同步进行和相互协调，以求所研制的武器装备交付部队使用后，能尽快形成战斗力。
-
The main research work of this paper are focused on following areas:(1) Based on review of the theory and methods on measurements of particle fields, a new idea for obtaining particle size and velocity distribution within a spray through imaging the particle field with a laser light sheet was put forward;(2) A DPIV (Digital Particle Image Velocimetry) system, is fit for velocity measurements of low speed flows, was developed and expended to particle size distribution measurement;(3) An arithmetic for particle velocity field reconstruction was developed, and the velocity distribution of water mist was also obtained;(4) A software system for particle analysis, which based on image geometry emend, de-noise and image partition was developed, the parameters such as particle size distribution, mean diameter, number of particles, minimum and maximum diameter can be got with this system;(5) A water mist system was developed and its characteristics, such as droplet velocity, size distribution, number of droplets and spray cone angle under different conditions were obtained from experiments with PIVS;(6) The measurement results of water mist characteristics with PIVS were compared and analyzed with the simply simulated results, and in addition, in order to verify the accuracy of PIVS, some experiments were conducted with the standard particles, such as glass-ball with known mean diameter of 50μm and 115μm, metallic coated tracing particle with mean diameter of 12μm;(7) Some experimental studies on interaction of water mist with liquid pool fires were conducted.
本论文的主要工作包括以下几个方面：（1）在对粒子场测量的相关理论和具体方法进行综述分析的基础上，提出了通过采用激光片光对粒子场进行成像以获取其粒径和速度等参数分布的新思路；（2）研制了适宜于低速流动速度场测量的DPIV(Digital Particle Image Velocimetry)系统，并使其实现了对粒子场粒径分布的测量功能；（3）研制了基于粒子运动轨迹的速度场重建算法，获取了细水雾雾场的速度分布；（4）研制了基于几何校正、去噪、图象分割等图象处理方法的"粒度分析软件系统"，该系统既可分析给出粒子场的粒径分布直方图和平均粒径，还可给出粒子的数目以及最大、最小粒径等信息；（5）建立了一细水雾发生系统，并应用上述方法对不同压力条件下细水雾系统的雾场特性（如速度分布、雾滴粒径分布、雾滴的数目、喷雾张角以及雾化长度等）进行了实验测量研究；（6）对细水雾特性参数的PIVS测量结果与计算机简单模拟计算结果进行了定性比较分析，并利用平均粒径为50μm和115μm的玻璃球以及12μm的标准示踪粒子对PIVS系统的粒径和速度测量结果进行了实验验证，同时对其局限性进行了分析讨论；（7）对不同工况条件下细水雾与油池火相互作用的过程进行了模拟实验研究。
-
The tianhe no.1, was born in high technology and large basic strategy of science and technology and equipment in a major innovation achievements, the self-developed super computer ability 0.1 quadrillion times to 1 quadrillion times from across China, after the United States as the world 1 quadrillion times a second can develop the super computer.
天河一号诞生，是我国战略高技术和大型基础科技装备研制领域取得的一项重大创新成果，实现了我国自主研制超级计算机能力从百万亿次到千万亿次的跨越，使我国成为继美国之后世界上第二个能够研制千万亿次超级计算机的国家。
-
The mechanical behavior of Shape Memory Alloys material is tested, and the constitutive model of the SMA is established. A kind of SMA combined rubber isolator is developed, and the isolation effect of the SMA combined rubber isolator for long-span bridge and tall building structures is numerically simulated, from which the adaptive isolation performance and the self-restoring capacity of the SMA combined rubber isolator are verified. A kind of SMA damper is developed, the mechanical behavior of the SMA damper is tested, and the model of restoring force of the SMA damper is established. The theory and method of adaptive control based on the SMA damper for the long-span bridge are built, and the effectiveness and reliability of the adaptive control for the long-span bridge using the SMA damper are verified through numerical simulation and model test. The MRF-04K type magnetorheological damper is developed, the mechanical behavior of the MR damper is tested, and the model of restoring force of the MR damper is established. The theory and method of adaptive control based on the MR damper for the long-span bridge and tall building structures are built, and the effectiveness and reliability of the adaptive control for the long-span bridge and tall building structures using the MR damper are verified through numerical simulation and model test. In addition, the theory and method of sub-structural damage identification for long-span bridge are derived, the influence of soil-structure dynamic interaction on the seismic isolation and control effects with different isolation and control measures and the damage responses and the sliding base-isolation of large structures under the excitation of underground explosion are investigated.
试验研究了形状记忆合金材料的力学性能，建立了SMA材料的本构模型；研制了一种SMA复合橡胶隔震支座，数值仿真分析了应用SMA复合橡胶支座的大跨桥梁和高层建筑结构的隔震效果，从而验证了SMA复合橡胶支座的自适应隔震性能及其震后自恢复能力；研制了一种SMA阻尼器，试验研究了SMA阻尼器的力学性能，建立了SMA阻尼器的恢复力模型，建立了基于SMA阻尼器的大跨桥梁结构自适应控制理论与方法，通过数值仿真与模型试验验证了大跨桥梁结构SMA阻尼器自适应控制的有效性与可靠性；研制了一种MRF-04K型磁流变阻尼器，试验研究了MR阻尼器的力学性能，建立了MR阻尼器的恢复力模型，建立了基于MR阻尼器的大跨桥梁和高层建筑结构的自适应控制理论与方法，通过数值仿真和模型试验验证了大跨桥梁和高层建筑结构MR阻尼器自适应控制的有效性与可靠性；还建立了大跨桥梁结构的子结构损伤识别的理论与方法，研究了土-结构动力相互作用对不同隔震和控制措施的减震控制效果的影响以及地下爆炸波作用下各类大型结构的灾害响应与滑移隔震。
-
Adopting uniform layout and information exchange standard to ensure that all of the development department can effectively share the information resource during the battleplan development can lead to the informatization of aviatic industrial corporation a...
本文从研究国内外军机研制部门在实现信息资源共享领域的应用现状着手，详细探讨了美国国防部在推出CALS战略体系时的实施经验和相关核心技术，在进一步完善现有软、硬件设施的基础上探讨了我军军机研制中实现有效信息资源共享集成系统的概念模型，为统一规划和建设适应我国军机研制的信息资源共享环境提供了参考，争取在下一代军机研制牛能够实现满意的信息资源共享水平。
-
In building the simulation models for manufacturing missions, based on the combination with the multi-agent method and the GOOPN method, the compoundable method is presented, which makes the models more intelligent. Based on the result above, combined with the GOOPN models and the GERTS model, we put forward EPN-GERTS model through embedding Petri net into GERTS model, which can simplify the complexity in building models, and also improve the defects of GERTS model in describing resource conflicts and Petri net model in building models. In building the simulation models for development missions, the improved GERTS model is present to describe the development processes in QRMS. Through dynamically computing the redo times in GERTS, the improved model can reflect the operation character of development process. The simulation results are more precise when we use the models above.
针对构建快速研制系统的仿真对象问题，提出了基于多Agent的快速研制系统可靠性复合仿真建模方法，增强了仿真模型的智能性；在此基础上，针对制造任务，将Petri网嵌入到GERTS网中，提出了用于快速研制系统制造任务可靠性仿真的EPN-GERTS模型，简化了建模过程，同时也能考虑任务之间的资源冲突；针对研制任务，提出了用于快速研制系统研制任务可靠性仿真的改进GERTS模型，该模型可以描述设计迭代过程的动态运行特点，使仿真结果更加准确。
-
According to the characteristics of the fuse industry and the research condition, We applied ZPrinter310 system to produce the fuze prototypes and used these prototypes to help design in the project argumentation phase, got the final project;Then we applied AFS-320 rapid prototyping system to produce the noumenon, analyzed the noumenon's precision、surface quality and performance of material mechanics in detail,based on these analytic results,we considered to use the noumenon in the fuze local performance test and some laboratory experimentations;At last we discussed how to combine the rapid tooling and precision foundry to produce batch of samples, we can apply these samples in the fuze system and ball cartridge experimentation.
本论文将快速成型技术贯穿在引信研制周期中的各个阶段，根据引信研制的特点及现有的研究条件，应用基于3DP工艺的ZPrinter310系统制造出了引信零件原型，并将原型应用于方案设计论证阶段辅助引信设计，得出了零件的最终设计方案；应用基于SLS工艺的AFS-320快速成型系统制造出了引信本体，对本体的尺寸精度、表面质量及材料的力学性能作了详细的分析，根据综合分析结果，考虑将本体直接应用于引信研制阶段的局部性能试验及部分实验室试验中；最后还论述了如何结合快速模具及精密铸造技术小批量制造引信零件应用于引信研制阶段的实验室试验及实弹试验中。
-
The significant function and status of metrology service for calibrating the optical systems in weapon systems and for developing the national toplevel standards are expounded.
针对计量管理在武器装备研制项目质量管理体系中的重要作用，以及计量工作对武器系统的保障作用(武器系统的计量测试和通用型武器系统校准检测装置的研制)，阐述了计量保障在武器装备和国家重大工程研制中的重要地位和作用，介绍了现有国防最高标准和校准检测装置为武器研制所提供的计量测试服务。
- 更多网络解释与研制相关的网络解释 [注：此内容来源于网络，仅供参考]
-
ACB AccessmethodControlBlock：存取方法控制块(IBM研制)
9 ACB AdapterControlBlock 适配器控制块,衔接器控制块 | 11 ACB AccessmethodControlBlock 存取方法控制块(IBM研制) | 12 ACB AddressCheckBoundary 地址复选分界线
-
ALAS AutomatedLiteratureAlertingSystem：文献状态自动报警系统(美国EliLillyandCo公司研制)
10 ALBO AutomaticLineBuildOut 自动... | 11 ALAS AutomatedLiteratureAlertingSystem 文献状态自动报警系统(美国EliLillyandCo公司研制) | 12 ALARC AssociationforLibraryAutomationResearchCommunications 图书馆...
-
triturate：研制
trisodium phosphate 焦磷酸钠 | triturate 研制 | trituration 研制
-
triturate：研制 研制剂 磨碎物
tritura 研制 | triturate 研制 研制剂 磨碎物 | trituratedclay 研成粉状粘土
-
trituration：研制
triturate 研制 | trituration 研制 | trommel screen 滚筒筛
-
trituration：研粉作用 研磨 研制 研制剂 磨碎 捣碎
trituratingmachine 研制机 | trituration 研粉作用 研磨 研制 研制剂 磨碎 捣碎 | triturator 捣碎机 捣碎器 研钵
-
triturator：研磨器,研制器
triturating machine 研制机 | triturator 研磨器,研制器 | triturium 分液器(分离不同密度的液体)
-
triturating：研制过程
trituratedclay 研成粉状粘土 | triturating 研制过程 | trituratingmachine 研制机
-
triturating machine：研制机
triturate tablet 模印片 | triturating machine 研制机 | triturator 研磨器,研制器
-
ZHU Wen-li：勾缝剂的研制 朱文利
6. 自干型水性醇酸树脂漆 周小勇 , 李彩虹 , 樊君凤 , ZHOU Xiao-yong , LI Cai-hong , FAN Jun-feng | 7. 勾缝剂的研制 朱文利 , ZHU Wen-li | 8. 合成树脂共聚乳液建筑涂料的研制与施工 郭立凯 , GUO Li-kai