砂的

基本解释 (translations)

arenaceous

与砂的相关的网络例句 [注：此内容来源于网络，仅供参考]

In the fluvial deposit environment, the quartz superficial characteristic is primarily by the inferior circle, the conchoidal breakage fracture and the submarine hit pit, revealing the transformation of current to the quartz; In lake-deposit environment, quartz sand superficial characteristic is by primarily abraded edges and parallel cleavage, the quartz maintained the primitive characteristic, indicating the quartz received few transformation of fluent, different quartz grain has their different curve character.

在河流沉积环境，石英砂的表面特征以次圆、贝壳状断口和水下撞击坑为主，显示了水流对石英砂颗粒表面的改造；在湖泊沉积环境中，石英砂的表面特征以多棱角和平行解理面为主，石英砂颗粒保持了原始的特征，表明了石英砂颗粒受到水流的改造比较少。不同沉积环境中石英砂颗粒表面结构特征都具有自己的曲线特征。

A series of closed simulated frost heaving experiments with medium sand and coarse sand of different clay contents were performed under different water contents,degree of saturations and dry densities.

对不同含泥量的中粗砂在不同含水量、饱和度和密实度状态下进行了一系列闭式冻胀模拟试验，用数理统计方法分别研究了不同含泥量中砂和粗砂的冻胀率随含水量变化规律，将中粗砂结合在一起进行综合分析，并将试验结果与现行规范和其他文献进行比较，指出两者不同之处。

Effects of dry temperature and dry time on properties of heat cured sand and the relationship with binder composition are as follows:sands bonded by binders that are not modified have high strength when dry temperature is high and dry time is long,but their anti-wettability power is poor . Sands bonded by binders that are modified by B but not modified by M can be dried quickly and sand strength is high but anti-wettability power is also poor. Sands bonded by binders that are modified by M but not modified by B can also be dried quickly to obtain maximum strength,then the strength becomes lower when they are dried continually for more time. and sand strength is high but anti-wettability power is also poor. Sands bonded by binders that are modified by M as well as by B at the same time can be dried quickly to obtain maximum strength at low temperature and short time. But the anti-wettability of sand mold is best when they are dried at high temperature and long time.

烘干温度和烘干时间对热硬砂性能的影响及其与粘结剂改性的关系是：未经改性剂B和改性剂M改性的粘结剂砂，脱水速度较慢，烘干温度越高，时间越长，则硬化强度也越高，但未经改性的粘结剂热硬砂的抗吸湿性较差；经改性剂B而不经改性剂M改性的粘结剂热硬砂，烘干硬化速度较快，强度也高，但在高湿度下的抗吸湿性不好；经改性剂M改性而不经改性剂B改性的粘结剂热硬砂，烘干时强度先随烘干时间升高至最大值后，继续烘干时强度又出现下降；经改性剂B和经改性剂M共同改性的粘结剂热硬砂能在短时间和较低的烘干温度下就可烘干到最高强度，即烘干脱水的速度较快，但试样的抗吸湿性差，若在更高温度和更长时间下烘干，试样的抗吸湿性得到改善，综合考虑烘干强度和抗吸湿性要求，对于φ30×30mm试样，理想的烘干温度是200℃，烘干时间20分钟。

Orthogonal experiment under special condition showed that modifier M has marked effect on properties of no bake sand. Other factors such as modifier B,phosphate concentration and aluminum hydroxide have some impact on properties of binder. It can be found by experiments that strengths of no bake sand are raised notably by binder that modified by modifier B. Modifier B can reduce the strength of no bake sand at high room temperature apart from condition of low room temperature that it can accelerate the reaction and strengthen the sand. Modest content of modifier M in binder has some improvement to anti-wettability of sand. But modifier B has not such notable effect. Electronic microscope shows that near cracks in no bake product there are fibrous shape substances formed when the samples are moistured in high humidity air for sometime.

通过改性剂B对粘结剂自硬砂的性能影响试验发现，改性剂B能显著提高粘结剂自硬砂的强度，在0℃左右很低的环境温度下改性剂M有利于提高自硬砂的反应速度和砂型强度外，但在较高环境温度下，改性剂M均降低粘结剂自硬砂的强度，但是适量的改性剂M有利于改善自硬砂的抗吸湿性，而改性剂B对于改善自硬砂的抗吸湿性的作用不如改性剂M明显，电镜观察发现抗吸湿性较好的自硬砂在高湿度下存放一定时间后，在粘结膜裂纹处会形成一种绒毛状物质，该物质对裂纹具有愈合作用，这种绒毛状物质中具有改性剂M中的某种成分，且含量很高，由此说明改性剂M对提高抗吸湿性有利。

It can be worked out by adding a fixed coefficient of correction to the granule free settling terminal velocity.

油气井出砂开采或储层出砂后的垂直井筒最小携砂速度是井筒携砂的重要设计参数，一般的方法是对颗粒自由沉降末速附加一个固定的修正系数。

The enquiry of " coefficient of correction " in traffic volume forecast;2. It can be worked out by adding a fixed coefficient of correction to the granule free settling terminal velocity.

油气井出砂开采或储层出砂后的垂直井筒最小携砂速度是井筒携砂的重要设计参数，一般的方法是对颗粒自由沉降末速附加一个固定的修正系数。

Study on effect of spillway trough on deposition efficiency of intermittent scouring sand basins;2. Traditional sediment tank has been improved in three aspects by putting an adjusting flow wall in the entrance of water, a spillway trough on spillway crest along the flow direction, redesigning the flush device and an auxiliary fl ush facility.

通过在沉砂池的进水处加调流墙、在溢流堰上沿水流方向设溢流槽、对排砂装置进行改进以及设置辅助冲砂设施三个方面对传统平流式沉砂池进行了改进，设计提出了一种新型平流式沉砂池，可以大大提高沉砂池的沉淀效率，特别是对细颗粒泥砂的沉淀具有很好的效果。

How to realizeprocess control of Furan resin-bonded sand self-curing technology has been briefly expounded combining practi- cal production with several sections such as raw material preparation, mixing sand, molding, coremaking,recla- mation and technological equipment design which have been depended upon to work out a series of document of techndogy and technique of furan resin-bonded sand self-curing process operational reules, technology regulations and acceptance standard of raw materials to pl...

呋喃树脂自硬砂；生产工艺过程；质量控制；本文结合生产实际情况，从原材料的准备、混砂、造型、制芯以及再生过程和工艺工装设计等几个方面，简要阐述了如何对呋喃树脂自硬砂生产工艺过程进行质量控制，并且在此基础上制订了工艺操作规程和工艺守则以及原材料验收标准等一系列有关树脂自硬砂的工艺技术性文件，对现场生产起了重要的指导作用。

The process of sand absorption is:(1) the vibration head vibrates and losses the sand layer, and supply high pressure air into the sand absorption head;(2) the high pressure air generates negative pressure in the sand absorption pipe when it is discharged out from the sand absorption;(3) the sand absorption head and the vibration are shifted downwards and maintains the water flow straightly.

取砂土的过程为：(1)振动头振动松散砂土层，同时向吸砂头供入高压空气；(2)高压空气通过吸砂头从排砂管向上排出的过程中，在吸砂管内产生负压，吸砂管将管口处的水和砂土吸入到吸砂头内，在高压气流作用下，吸砂头内的砂、水和气混合而成的三相流通过排砂管排出到受砂船上；(3)在吸砂的过程中，适时地将吸砂头和振动头下移并保持钻孔套管中的水流畅通。

We have observed the structure of these dune sands and analyzed the grain-size,surface textural features and several main chemical elements of them,the results showed that:(1) these dune sands have some eolian structure characteristics which are similar to the recent dune sands;(2) they are also similar to the recent dune sands in grain-size components,and parameters of Mz,?滓,Sk and Kg,as well as in several main chemical components;(3) the scatter plots of Mz-?滓,SiO2-Al2O3+TOFE and the probability curves of grain-size showed that these paleo dune sands are different from paleosols and fluvio-lacustrine facies but are consistency with recent dune sands;and(4) the quartz sands have well roundness and some surface textural features such as dish-shape pits,crescent-shape pits,pockmarked pits,upturned cleavage plates,siliceous precipitates and siliceous crevasses,indicating that they had been carried for a long time by the wind.

对这些沙丘砂的沉积构造观察以及粒度、扫描电镜和常量化学元素分析结果表明：(1)这些沙丘砂具有与现代沙丘砂相似的风成沉积构造特征；(2)粒度及其参数--Mz、σ、Sk和Kg，以及主要化学组分SiO2、Al2O3和TOFE也与现代沙丘砂相近；(3)Mz-σ、SiO2-Al2O3+TOFE散点图和概率累积曲线显示这些沙丘砂与萨拉乌苏组中的河湖相、古土壤差别明显，而与现代沙丘砂一致；(4)石英砂颗粒具有良好的磨圆以及碟形坑、新月形坑、麻坑、上翻解理薄片、硅质沉淀和硅质裂纹等表面结构特征，反映其曾受持久的风力搬运作用。

与砂的相关的网络解释 [注：此内容来源于网络，仅供参考]

Freiberg：实型铸造工艺中的三维震动对硅砂的充填和紧实性研究

(11)介绍消失模委员会 Di... | (12)实型铸造工艺中的三维震动对硅砂的充填和紧实性研究 Prof.Dr.-lng.J.Bast/Dip;.lng.W.Simon,Tu Bergakademie,Freiberg | (13)LWF的学术动态 Dip;.lng.F.-J.Wostmann,Laboratorium f...

Prof.Dr.-lng.J.Bast/Dip;.lng.W.Simon,Tu Bergakademie,Freiberg：实型铸造工艺中的三维震动对硅砂的充填和紧实性研究

(11)介绍消失模委员会 Di... | (12)实型铸造工艺中的三维震动对硅砂的充填和紧实性研究 Prof.Dr.-lng.J.Bast/Dip;.lng.W.Simon,Tu Bergakademie,Freiberg | (13)LWF的学术动态 Dip;.lng.F.-J.Wostmann,Laboratorium f...

Frosted：磨砂的

frosted lamp 磨砂灯泡 | frosted 磨砂的 | frosting 起霜

frosty：磨砂的

Matt 亚光 | Frosty 磨砂的 | Deskjet 家用喷打

silty：粉砂的,淤泥的

粉砂冰碛土 silttil | 粉砂的,淤泥的 silty | 粉砂质角砾岩 silty breccia

simoom：阿拉伯地方挟带飞砂的热风

simony /僧职买卖/僧职买卖罪/ | simoom /阿拉伯地方挟带飞砂的热风/ | simp /笨人/

ammophilous：喜砂的

ammonotelic animal 排氨动物 | ammophilous 喜砂的 | amnesia 健忘症

oversanded：多砂的

oversampling 采样过密 | oversanded 多砂的 | oversaturation 过饱和

psammophilous：喜砂的

红眼鲈 Psammoperca waigiensis | 喜砂的 psammophilous | 鳖甲蜂科;玳瑁蜂科 PSAMOCHARIDAE

sabulose：多砂的;砂生的

刀豆 sabre bean;sword bean;Canavalia ensiformis Dc. | 多砂的;砂生的 sabulose | 囊 sac